The door is the first constructive element of the houseor apartment, falling into the field of view immediately before entering the room. Repair work in an apartment or a house or office is often accompanied not only by the restoration of the finish, but also by the replacement of doors, entrance or interroom. In order to understand the types and methods of dismantling, it is necessary to know what kinds of doors exist and how they differ from each other. Because you need this material.
Types of doors are determined by:
Each of the designs differs from the otherspecific features of a particular species. This nuance must be taken into account when dismantling the doors. Such work is carried out in accordance with the need to install the door leaf completely or for restoration, with the subsequent installation in place. The work related to the removal of doors can be carried out in full or in part, that is, with the dismantling of the door box or without performing this stage.
Carrying out the replacement of the door leaf, implying the dismantling of the box, the procedure is carried out in full.
The builders distinguish two basic methods of carrying out work on the removal of doors and call them simply: sloppy and neat.
Applying the first, the door frame is sawn at an angle of 45about. So it will be easier to extract from the opening. In the process, tools such as scrap, ax, nail dodger are used.
When choosing the second method of dismantling, get ready formore time-consuming and painstaking work. The main task of the neat method is to preserve the integral original look not only of the door leaf, but also of the box. In this case, you can not do without a screwdriver, pliers, chisel - the most frequently used set of tools at the stage of forthcoming works.
"Breaking - not building" - this is the mottoguided by most masters, conducting the dismantling of doors. In fact, it is also necessary to break correctly. The professional extraction of interior doors means carrying out the procedure so that, in the end, the removed doors and the box, as well as the surfaces adjacent to it, are not critically damaged.
Doing this procedure is not as easy as it might seem, especially if glass was used as a production material for doors or plastic.
Working with such material, it is necessary to beextremely accurate, because despite its strength characteristics, modern materials used for the release of doors can be damaged. Even a small scratch will be visible on the matte plastic canvas or transparent glass construction, and this is just the tip of the iceberg. In case of inaccurate handling, the door may crack at all, then you will have to buy a new one, which, as noticeable in the dynamics of market prices for door and window structures, is not cheap.
Carrying out the dismantling of doors, be sure to observe the order of work:
Interestingly, the scheme for dismantling the front door,interior or balcony, does not differ significantly. The features of the procedure depend on the type of material from which the door leaf is made. Where you can apply force when working with particleboard or MDF, you will not work "full" with glass or plastic. Care must be taken here.
Getting to each of the processes, it is necessaryobserve the steps of removing the doors, the accuracy of the work. It is important not to hurry, removing the old doors. Know that the removal process is still easier than installing them, but still requires accuracy.
In general, it is not difficult to dismantle, you cando it yourself. This move will require more labor, but will save a material resource. Or entrust the work to professional builders who can solve the problem without too much trouble.
Use the provided recommendations - and then you will be able to dismantle the doors without much loss.