Color mixture mixtures appeared on the Russianthe construction market not so long ago, but immediately won great popularity. And there is nothing surprising in this. After all, with their help you can build very beautiful buildings and structures. In what cases is this material used and what performance characteristics is different, consider later in the article.
In the same way, as well as from usual, from color drymixtures are prepared solutions for masonry bricks. You can use them to build any buildings. This mixture differs from the usual only the presence of a certain color. It can be selected both in the tone of the masonry, and in contrast. Thus, when using this material, there is no need for additional stitching with colored grouts. Using it, you can build a very original design on the wall.
Color mixture mixtures consist of:
The use of this material in the construction of buildings and structures in comparison with conventional concrete gives the following advantages:
There are only two options for using suchmixtures. They are simply irreplaceable when it is necessary to achieve the selection of the color and texture of the brick itself. In this case, use a solution of contrasting hue. If it is necessary to make so that the seams are invisible against the general background of the wall, the material of the same color as the brick itself is used.
The masonry mixture of this variety is usedfor the construction of both internal and external walls. In addition, it is just great for carrying out various kinds of work related to the finishing of structural elements of buildings. For example, very often such mortars are sealed by tile joints. Also, these mixtures are used in laying pavers. Another area of their application - finishing fireplaces, chimneys, plastering surfaces.
The solution is prepared in exactly the same way as from conventionalmixtures. Dry material is diluted with water to a consistency of sour cream and thoroughly mixed. Before use, the solution is allowed to stand for an hour to obtain a good dispersion. In the winter, specialists recommend that the mixture be diluted with warm water only. In any case, the resulting solution must be worked out within three hours, otherwise it will start to solidify.
Masonry using such solutionsis carried out on the full seam. The screed is produced in the usual way. In the event that a mixture of light colors was applied, only wooden or plastic tools are used. When making grouting joints are previously cleaned of dust and dirt. Then they take out the crosses. Further, a solution is applied.
Knees must be produced strictlyfollowing the manufacturer's instructions. The fact is that surpluses of water not only reduce the strength characteristics of the composition, but also change its shade towards a lighter one.
The most popular todayPerl color masonry mixes are considered. They are made using only the highest quality materials. In addition, they are distinguished by a wide variety of colors and shades. If desired, you can buy a white mixture, super white, gray, chocolate, red, yellow, cream, beige, etc.
Perel masonry mix is produced withusing only high-quality non-additive cement. The preparation of a solution from a dry material is a very simple process. Strength is the same, the finished mass is gaining almost instantly. Another distinctive feature of mixtures of this brand is that the solution prepared from them is characterized by a high degree of plasticity. This facilitates construction and repair work.
In accordance with the degree of water absorption of the brick, you can choose a mixture of Perel NL, Perel SL or Perel VL. Such a variety allows you to perform quality masonry in any case.
Use such an interesting material ascolored masonry mixtures, when building walls and partitions of buildings, as well as performing various kinds of repair work, it is certainly advisable. Excellent characteristics of these substances - guarantee the quality of finished structures and their aesthetic appearance.
