Self-repair - electric spray gun

Application of compositions consisting of varnish and paint,is the main function for which the electric spray gun is responsible. The use of such a tool can improve the quality of painting and reduce labor costs.

Such devices can be of two types: manual operation and acting on the electrical network. They function by spraying technology without air, pneumatic or mixed spraying.

For the treatment of surfaces with compositions consisting of water with chalk or water with lime, a spray gun is used by hand.

The main advantages of its application area hard alloy nozzle for spraying; corrosion-resistant coating of parts; compactness; ease of maintenance; Insignificant weight; probability of work regardless of energy sources from the outside; intake of solution from any volume; spraying without drops.

Spray gun for electric type paintis currently more popular. Its application makes it possible to significantly improve the quality of the work performed and at the same time to minimize the time consumption. It must be remembered that it is possible to use an electric spray gun only after preliminary preparation of the surfaces for staining.

Before starting work all rooms are requiredclean from debris, dirt, dry every damp place of plaster. The surface of the plaster should be smoothed with roughness, the mortar sealed with all cracks. Without splinters, cracks and other defects, there must be surfaces made of wood. Clean the surface of metal from rust. For successful operation of the electric paint sprayer, all these conditions must be followed. Depending on the type of paint, one or two layers are applied.

In the case of a cylindrical type are built inelements of a pump having a piston structure. The latter includes a cylinder, stem, cuff with a handle for driving. Sealing rings require that there is more tightness between the housing parts and the pump cover. The fishing rod is divided into two parts, which make it possible to regulate its length. The atomizer is equipped with a bend so that there is a chance of changing the flare of the torch to the axle rod.

The meaning of the operation of such a device is based on the lowering of a suction hose with a filter into it, during operation of the handle of the rod on suction of the composition for painting from the container.

Pumping paint composition into the can, valveslams, in the opposite direction of rod movement. With increasing pressure, this compound moves to the rod and, with the help of the trigger, reaches the nebulizer, which is used for pollination.

Spray gun electrical reviews have good,they indicate that before the painting it is necessary to check the device for its ability to work. When preparing for work, it is necessary to connect the two short ends together with an elongated fishing rod, using a threaded connector with a gasket for this purpose. Further, by the method of a short fishing rod, one part is to be unscrewed from the long one, and the second one is screwed into the spray gun.