At the moment the best means for paintingvehicle can be considered a spray gun for painting cars, which is used widely enough in professional workshops and in ordinary garage conditions. It is worth considering this device in more detail.
Spray gun for painting cars can be oneof three types: mechanical, pneumatic and electrical. The most economical first type, but the rest exceed it in performance and other indicators. Electric spray guns have become much more widespread. With their help, it is possible to achieve a high quality of coating different types of coatings on the vehicle surface. The layer will always be smooth and smooth. Spray gun electric for painting the car eliminates the need to apply several layers of material, which significantly saves money.
To conduct high-quality painting workauto using this device, you must follow a certain sequence of actions. To start, the nozzle must be checked for correct installation of all parameters. The torch for this is adjusted to horizontal spraying, for which the air flow screw should be opened completely. Next, it is necessary to adjust the position of the screw responsible for the paint consumption, so that the optimum shape of the torch is provided when the trigger is clamped by 6 mm. A thin and uniform finish layer can be obtained if local sprayings are carried out in circular motions, while trying to avoid prolonged spraying in one direction. The paint should be sprayed evenly and without any jerks.
When the spray gun for painting the car will beto adjust, it is necessary to evaluate the volumes of the forthcoming work as closely as possible, as well as the dimensions of the painted part. That is, with a narrow area, you want to set the device to a narrow shape of the torch. Staining is from a distance of 18 centimeters. Spray gun for painting cars, the price of which starts from 500 rubles and more, should be kept perpendicular to the surface, which will give an even beautiful layer. The movements should be circular, with a radius of about 8 centimeters. Release the trigger after each sputtering - this is a prerequisite for a qualitative performance of the work.
To begin with, it is recommended to produce a colorunobtrusive details, since after that it will be difficult to apply a uniform layer of paint on them. The finishing layer should be applied only after the base layer has dried, the structure of which must be uniform.
If you use a spray gun for painting cars,you can achieve a really excellent result even in your own garage. The main condition of work in this case is a strict observance of all rules of operation of the device, as well as its fine tuning. Only in this case it is possible to achieve a really excellent result.
