Aerography is a very effective way of tuning.And if a variety of plastic skirts have become a commonplace in cars, then with the help of a unique combination of colors you can attract the attention of many car enthusiasts and simply walking alongside pedestrians. However, aerography on the car is not so easy actually. The painting process is very serious, so many car owners turn to specialists for help. But as practice shows, it's quite possible to make a drawing on a machine by yourself. So, let's look at how to make airbrushing yourself.
To perform the work you will need the following devices:
You will also need a funnel, hose, connector and various accessories for cleaning the airbrush. They are usually already included in the last tool kit.
In deciding on how to do it yourselfaerography, at the first stage you need to find out what exactly you will apply to the car. And the drawing should be not only in fantasy, but also on the computer, so that later there were no inaccuracies in the drawing. It is advisable to use a special program to create such things. In it, you will make an exact copy of the airbrushing, which in the future will be applied to the car. Also it should be noted that if in this area you work for the first time, do not use more than three shades of paint, as this will significantly complicate their application.
Before you do aerography on the car,you need not only to program the future drawing on the computer. It is necessary to make a stencil out of it. For this, thick paper or foil is usually used. Some designers use special film and thin cardboard. Before you do airbrushing yourself, you need to apply the contours of the image that you previously designed on the computer to the selected surface. After that, cut the resulting pattern on the internal lines.
Now we clean the surface of the machine, namelythe place where you are going to apply the drawing. To do this, you need to thoroughly wash it, degrease it and cover it with soil. The presence of rust is unacceptable here, otherwise all airbrushing will soon be covered with pimples and will crumble more and more every day (of course, together with the metal, which can not be tolerated). When there is not a single trace of corrosion and contamination left on our body, we apply soil to it (preferably in 3 layers). Now you need to fix with the help of an adhesive tape on the surface of the car the image stencil and start painting its outlines. It is important to observe the accuracy, so that there will be no staining. The painting process itself should be carried out during the day, with good lighting and, preferably, away from dusty terrain.
At this stage, the question of how to make airbrushing yourself can be considered exhausted. In addition, it is possible to treat the body surface with varnish and polish.
