Если вода стала застаиваться в раковине или bath, it can talk about the formation of a blockage in the sewer pipe. It brings discomfort to all people living in the house. Therefore, a solution to the problem must be immediate. Many decide not to resort to the help of professional craftsmen. However, cleaning of sewage pipes with their own hands should be carried out in accordance with certain rules. Failure to comply with the technology may lead to failure of communications. The blockage can also not be removed if the plumbing is done in the wrong way. Therefore, before carrying out such work should be acquainted with the advice of experts in the field of sewage and plumbing.
Чтобы прочистить засор в канализационных трубах with your own hands, you must first determine its location. Most often they are found in the riser bathroom or in the kitchen. Cork may be formed in the pipe, which is fed to the washing machine.
There are common blockages that are not even inapartment, and in the riser supply communications outside it. If it is a private house, the reason for the general blockage should be sought on the street, where the local sewage system is connected to the city.
Clearing sewer pipes with their own handsbegins with determining the type of blockage. Having collected water in the kitchen sink, bathroom, flushing the water in the toilet, you should see where the water will go and where it stagnates. If the sewage system is clogged in only one place, the cause of the blockage is eliminated with the help of self-cleaning sewer pipes using one of several possible methods.
If the blockage is common in a high-rise building, you can put a check valve in front of the sink. It will not allow water to rise from the sewer into the sink.
There are several types of blockages. In order to clean sewer pipes with household recipes to be effective, it should be determined what caused this situation.
Operational blockage appears gradually.The water is starting to go down the drain. The sooner the sewage pipes are cleaned with their own hands, the better for sewage. These blockages are due to the gradual entry of small accumulations of fat into the system, which stick to the walls and accumulate there over time. So traffic jams are formed.
Another type is mechanical blockage.If foreign objects get into the system, an obstacle is created in the path of water flow. Most often this is due to the pranks of young children or the irresponsible attitude of adults to sewer communications.
A siphon can also get clogged (device,located under the sink or bathroom, does not allow unpleasant smell into the apartment). Therefore, before cleaning the sewer pipe yourself, you should determine the cleanliness of this device.
There are blockages that appear due towrong design of communications. It stands out from the number of common problems with sewage. Clearing the sewage pipes with their own hands in this case is only effective for 2-3 weeks. And then the problem returns.
This phenomenon is due to impropersystem design. At the wrong turn of a pipe in the place of its bend angle dirt and garbage begins to accumulate. This happens much faster than with normal clogs. In such cases, only redevelopment of communication systems will help.
Correct the wrong angle will not only have toone place, but along the entire length of the pipe. It will have to shift, perhaps more than a dozen meters. A properly designed system has a slope for every 2 meters of pipe in 2 cm. No more and no less. If this rule is not observed, in the case of a small slope, the water will pass too slowly and subsequently dirt accumulates on the walls. With a greater bias, the water will flow too quickly, not having time to take solid particles with it.
There are several methods for cleaning the sewage pipe with your own hands. They can be divided into three types:
Each is an effective way.cleaning sewer pipes for various types of blockages. The earlier the owners noticed the problems with sewage, the easier it will be to fix the problem.
To folk remedies include such methods as cleaning the pipe with soda and boiling water, vinegar or salt.
Chemical products are presented in a wide range by manufacturers of household chemicals and are also quite often used to pollute the sewage systems of a house or apartment.
Mechanical tools include a plunger, a cable and special pipe cleaning machines.
Cleaning the sewage pipes with their own hands soda is widely used in folk recipes to eliminate such problems.
При помощи соды в сочетании с кипятком можно clean small and medium communications blockages. Act in accordance with specific instructions. This will allow you to efficiently clean your sewer pipes with your own hands with soda.
First, from the drain hole must be manuallyget all the trash. Then a liter of boiling water is poured into the hole and left for a few minutes. Soaked with boiling water you can try to get a blockage with the help of a plunger.
Next, 1 cup is filled in the drain holesoda It is filled with a small amount of boiling water. Perhaps this action will have to be done repeatedly. Soda will create an alkaline environment that will help disinfect and eliminate unpleasant odors.
Another popular tool that allowsget rid of the average blockage, is soda-acetic clearing of sewer pipes. Household recipes use the chemical properties of these two substances and their reactions in the interaction.
For getting rid of clogging and cleaningSewer pipes in a drain opening half a glass of soda fall asleep. Then half a glass of vinegar is poured there. Leave the mixture for a couple of hours. It will affect clogging through a chemical reaction. Formed foam, which eliminates clogging.
In order to keep dirt and debris out of the pipe in the sink, it is better to close the drain hole with a stopper after pouring the product inside the sewage system.
After processing the pipes are poured boiling water for washing. Using this method, you can also disinfect pipes and clean sewers from grease.
Еще одним простым способом является прочистка drains with salt and soda. They will be in every home. This is a fairly simple cleaning of sewer pipes. How to get rid of the blockage with the help of such tools, tell a special instruction.
Soda and salt are mixed in proportion 1:1 and fall asleep in the drain hole. There also poured a small amount of boiling water. The mixture remains in the pipe for a period of 8 to 10 hours. During this time, boiling water is periodically poured into the hole.
Presents the tool creates a strong alkaline environment that can dissolve the blockage. Dirt and grease just eat up such a mixture. Boiling water in this case enhances the effect.
There are other ways to get rid of the problem of stagnant water in the sink or bathroom.
Today the chemical industry offersmany tools for cleaning sewage systems at home. There are both very inexpensive domestic products, for example, Mole, and expensive imported gels. The principle of action of such substances is identical. If the cause of the problem was a fat plug in the pipe, then any tool would be effective, regardless of its price category.
Chemicals make it easy to performsuch action as cleaning sewage from fat. Methods and means should be applied in accordance with the manufacturer's instructions. In this case, the process will be effective.
Many manufacturers recommend preventing the occurrence of presented problems by preventing the appearance of contamination.
Vantuz has long been known to mankind as a simple andpublicly available tool to combat blockages. It creates increased pressure inside the pipe and allows you to push through the blockage, breaking it into smaller pieces. Sometimes, if the blockage is close to the drain hole, the plunger can reach it outside.
Proper use of such a toolimplies following technology. Closes the hole for draining water overflow. Then the plunger tightly pressed to the drain hole. The bath or sink is filled with water above the rubber level of the instrument. Next, produce frequent rhythmic movements up and down, without removing the plunger from the surface.
After some time, the plunger is abruptly removed from the drain and the result is checked. If the water still does not drain, the procedure is repeated again.
In case of a more serious blockage inthe depth of the pipe, you should use more efficient methods of cleaning sewer pipes. For these purposes, use the cable. Push its end into the drain hole. This should be done as deeply as possible and try to bump into a blockage.
In order to push the cork should be madeforward movement of the cable in the pipe. This should be done before the free discharge of water. Then the pipes are cleaned with boiling water and running water. In order not to damage the pipes, the cable should be used without great effort.
Ознакомившись с существующими методами, able to eliminate the problem of clogging, cleaning the sewage pipes with their own hands will allow you to quickly and accurately solve this issue. Depending on the severity of pollution, use one of the proposed methods. However, if all methods have been tried, and the desired result has not been achieved, it is worth asking for help from professionals who, with the help of special equipment, will be able to eliminate the problem of water discharge.
