What you can do with your own handsmaterials? Yes, almost everything! Starting with the simplest furniture, finishing movable transport. And today we will consider one of the ways, thanks to which it is possible to make a trailer for a motoblock with own hands.
At the first stage it is necessary to develop a drawing,present the future view and at least the approximate dimensions of the trailer. After that you need to calculate how many meters of metal you need to purchase for this design, including the channel. They will serve as a frame for your hitch. So you not only save money on acquiring, possibly, extra corners and screws, but you will be sure of the correctness of your actions. Because at random, anything can happen, just not a trailer.
So, we have prepared tools,drawing and a welding machine is necessary, because without it you simply can not make a homemade trailer to the motor block, because on self-cutters such a construction will not pass for a long time. First you need to make a frame. This is also the basis for the trailer, therefore it is necessary to measure and perform calculations here with high accuracy. Errors in sawing and joining of channels are excluded. Trailer for motoblock with your own hands can be made from pipes of rectangular cross-section with the size of 60 to 30 millimeters, which will serve as the basis of the whole construction. In addition, it is necessary to prepare 2 steel squares measuring 25 by 25 millimeters, which will serve as a traverse. All this must be welded together and fixed for the reliability of the construction of 5-6 cross-members. In this case, the traverse and cross members must form small outlets with respect to the longitudinal members.
To the front part of these edges we weld another pairlongitudinal pipes on the sides, on which the racks will be further mounted. The latter should be welded to the upper straps. As a material, you can use the same 25-mm tube with a cross section.
Pay special attention to the sides.In addition to the rear, it is advisable to make two lateral folding, which will greatly facilitate the loading and unloading of various building materials and make the trailer more versatile, since you will have the opportunity to transport oversized cargo. Metal beads should have a thickness of not more than 0.8-10 millimeters.
This is a particularly important aspect in the designhomemade device. Here, as the wheels and springs, you can use parts from any domestic car, for example, "Zhigulya" or "Moskvich". These units are connected to the beam with a welding machine, and the ends - with spars. On the last, by the way, it is necessary to establish the axis of the earring and the bracket.
And the last thing that needs to be done is a drawbar.At this stage, the question of how to make a trailer for a motoblock with your own hands will be accompanied by the welding of a pipe 60x30 millimeters to the front ends of the spars. In this case, the ends of the beams must be joined and welded to the body of the towing mechanism. Thus you get a ready 2-beam drawbar.
