/ / How to make a disk hedgehog for a motoblock with your own hands?

How to make a disk hoe for a motoblock with your own hands?

If you have a plot of land, then on itprobably grow potatoes, cultivation of which will be easier to produce with the help of special tools. Among them, one can distinguish a disk hiller for a motor block. With your hands this tool can be made with ease. A simple model of this kind of hillbilly can be made from improvised tools.

Manufacture of lime horn

disk hedgehog for a motor block with his own hands

The easiest way to make a hornis the execution of a model that has a fixed width of capture. This construction is represented by wings that are connected and slightly extended, and also fixed with each other. Such elements in the equipment should be 2. For the reason that the wings remain stationary, it will be impossible to adjust the width of the grip. Therefore, the width between the beds will need to be adapted to the tool, and not vice versa. The disk heel for the motor block is usually made by the factory equipment, the width of the tool is 30 cm, which is not very convenient, because the width between the dispersion of potatoes assumes a parameter equal to 60 centimeters. As a feature of the lizard hillocks, there are thin racks. This makes it possible to resist the overloads of the motor cultivator when the tool is being ground to the ground.

Features of a hiller with variable width of capture

Hiller disk for motoblock own hands

If you are thinking about how to make diskhillers for a motor block, you should know that these tools are most convenient if they have a variable working width. This is due to the fact that they have an adjusting mechanism, with its help you can adjust the position of the wings. This allows you to obtain a width between rows that can be changed. Similar hillers are used in tandem with motor blocks, the motor of which demonstrates power within 4 liters. from. and more.

Among the shortcomings of such tools isallocate a significant energy intensity. The main advantage of disk shearers is the successful combination of the tool with the motor block. In the process of using this tool, you will achieve the greatest efficiency.

Propeller-type hiller

disk hiller for motoblock own drawings

Before starting work, it is necessary to study the drawingsdisk hiller for the motoblock, but if you do not intend to produce the work yourself, you can purchase a propeller tool. At the heart of his work are special propellers, under the influence of which the ground is first ground, and then weeds are extracted from it. And only then the loose soil is used for hilling.

Features of self-made disc horn

drawings of a disk hiller for a motoblock

Before you make a disk hoe formotoblock with their own hands, you will need to prepare the necessary materials. It will be necessary to use a template made of steel. The thickness of the latter should be 2 millimeters. From the canvas you will need to cut out the halves of the instrument. The workpiece data must be bent until they coincide with the radius, only then you can start the welding work. Welds must be treated with a Bulgarian. If there is a need, then the elements need to be welded, and then well cleaned. In the end, you should get an even layer of metal, the surface of which should be ideal.

Peculiarities of the manufacture of the horns

When a disk heap is made formotoblock with their own hands, the drawings are absolutely worth considering to the master. In addition, it must be remembered that the working blades must be prepared from the same density steel. In order to make a tool, you need to choose the type of disc. They will be steel sheets, the thickness of which is 2 mm. In these components of the hiller should be the lower edges, which should be bent. The main condition is that the disks should be located symmetrically in relation to each other. Otherwise, the tool will lead to the side, which will complicate the work of the summer resident. When creating a design, you can apply the shares that were borrowed from the old seeder. These elements, when a disk hoe for a motoblock is made by hand, the drawings of which you can take from our article, should be mounted at an angle. In addition, it will be necessary to sustain a step between the lower points, which should be equal to the width of the wheel track. This parameter is equivalent to the width between rows. The conjugation of elements among themselves can be made with the help of bolts, it is also acceptable to use a welding machine. The disks must be interconnected by means of an adjustable adapter. In addition to discs, the main elements of the instrument are struts, screw lanyards, and also a leash. The last of them must be executed in the form of the letter T.

Hiller disk for motoblock own handsmust be performed using the lanyards that are needed to correct the axis of rotation of the discs. To the motor block, this tool should be fixed by means of a beam that has wings. When manufacturing and assembling parts, the specified size must be carefully observed.

Tool manufacturing options

Disk hedgehog for a motor block with own handscan be performed using one of two technologies. One of them involves the use of a variable, the other - a fixed width of the capture of the wings. In the first method, the distance between the disks can be changed by the method of permutation of the racks.

how to make a disk hack for a motoblock

Disk hedgehog for a motor block with own handscan be performed in such a way that it is possible to facilitate the work with the tool. For this, it is necessary to provide for the presence of sliding bearings. Once the bearings are installed, you can increase the reliability of the tool. Do not use sliding bushings.

Finally

how to make a disk hoe for a motoblock with your own hands

During the erection of the structure for fixing the hillerto the motoblock you need to use the hitch bracket. To do this, the driver of the hiller is fixed to the last, using bolts and a stopper. The latter should be installed in the internal space of the tube with a square cross-section, after which the piece is pressed tightly against the outer surface. The tow hitch bracket can be rotated with bolts, while the leash can be located along the longitudinal axis of the truck. After that, we can assume that the hoger disk for the motoblock with its own hands is made and ready to go.

Liked:
0
Popular Posts
Spiritual development
Food
yup