For a long time the building stapler has become indispensable andan obligatory tool in the arsenal of the master, and this does not depend on the nature of his activities. On sale today you can find staplers of different types, they can be electrical or mechanical. The former allow to achieve higher productivity and facilitate the work of the master.
Such units are called stackers, in the work theyuse a motor that takes the effort. To obtain a greater impact force at the output, manufacturers can use the springy springs, in addition, the tool is supplied with consumables of the appropriate size. If we consider an electric stapler, it can be noted that it has all the useful functions of a simple stapler, but mobility is not its end, since an outlet is required for operation. The problem can be solved using a battery, but it adds capacity and mass.
If you decide to purchase an electric stapler,then, according to buyers, should know that its power can reach 1500 watts. This characteristic is peculiar to the BLACK & DECKER KX418E model. With the help of such equipment it is possible to hammer the rigging to an impressive depth. But if you consider an electric stapler Rapid EN50, then it is able to use 50-mm studs.
The most possible length of the staple, as stressedusers, for the described equipment is 25 mm, and if compared with muscular variants, this parameter can vary from 10 to 15 mm. For safety during operation, according to consumers, you can not be afraid, as manufacturers provide rubber-coated linings and plastic casings that exclude the possibility of electric shock from the master. Double insulation is provided with motor winding and power cord.
When choosing an electric stapler, you must turnattention is also paid to the length of the supply cable. The rule of good tone is the version of the equipment, in which the cable has a length of 5 m and more. This increases the ergonomics of the device. If you want to acquire a functional and durable tool, you should pay attention to the main components, in particular the sole. They are usually made of metal. But the weight of such equipment, including the mass of the engine, exceeds the 2 kg mark.
The stapler with the engine has additional systemsby the type of smooth and stepwise adjustment of the impact force. The first functional is equipped with the Metabo Ta M 3034 model, which, due to this, is chosen by buyers quite often. As for the adjustment option, it is characteristic of the Sparky T 14. The consumers pay attention also to pulse frequency control, accidental start protection, depth sensor, safety locks and automatic reusable impact. All this is in the model Novus J-155 A. But the version of the equipment Bosch PTK 14 E has the following features:
Many masters note that the electricThe stapler has a low rate of fire, therefore it is necessary to take into account the maximum number of pulses in a certain time. For traditional models, this indicator is within the range of up to 30 rounds per minute.
Electric stapler "Zubr 2000" costs onlyonly 3300 rubles., which, according to customers, is an acceptable cost. This staple gun is used for fixing different materials, namely:
The design allows you to operate nails andstaples. Consumers like that the instrument is equipped with electronic adjustment of the impact force, which ensures that the gun can be adjusted to work with a certain material. This electric stapler, as the buyers claim, has many positive features, among them it should be noted:
A random operation will not occur untilThe gun will not rest against the material. The engine is cooled well by operation thanks to the ventilation holes located on the body. Buyers especially emphasize that the model has a comfortable grip with special inserts for grip without slipping the hand.
This electric stapler, reviews of whichshould help you make the right choice, according to buyers, has good performance, which is guaranteed by an impressive frequency of operation. The tool store is quite capacious, because it can charge up to 50 pieces of equipment.
The service life and reliability of the unit are increased, thatis provided by a hardened striker. You can completely turn off the power with the main switch, which is very convenient. The described electric stapler "Zubr" has outstanding technical characteristics. For example, the number of strokes is 20 per minute. The power of the device is 2000 watts. Weigh equipment is only 1.6 kg. This feature, according to consumers, provides the opportunity to work with the tool for a long time.
If you are interested in Novus products, then you can consider the staplers of the two models:
As for the first option, it hasquite impressive cost, which is 12,300 rubles. For the second model, the consumer will pay only 4000 rubles. The Novus electric stapler can be used to attach profile boards and panels. The first version of the equipment has a smooth adjustment of the impact force, which allows the use of long fasteners. Buyers like that this version of the device is able to work from a network with low voltage.
Comfortable work even in hard-to-reach placesThe presence of a thin spout. Before buying, you need to become more familiar with the technical specifications. As for the first model, its weight is only 2.3 kg. The dimensions of the staples used vary from 18 to 30 mm, whereas the length of the nails is between 16 and 30 mm. There is an additional option in the design in the form of the possibility of double impact.
For comparison, we can consider the second model,which is used for interior decorative work, when there is a need to block cardboard, film or fabric. Operation, according to consumers, is simplified due to the electronic adjustment of the depth and impact force. The master will be able to work away from the power source thanks to a long network cable. Replacing the staples, as the home wizard claims, is simplified by secure unlocking.
Such an electric stapler for furniture is quitecan be used. Its weight is 1.16 kg, which eliminates the wear of the operator's hands. In order to determine the choice, you need to become more familiar with the features of the described models. In the first case, it can be argued that the stapler provides comfortable work, has a special window to control the number of staples in the store, and accidental shocks are excluded due to the presence of a protective nozzle.
Consumers choose the second model, since itIt provides high accuracy due to the availability of a special ruler. A secure grip is guaranteed by a comfortable grip. Additional advantages of this variant of the device are considered by consumers to be a remote stop, which requires a parallel arrangement of staples. In the case of this device there is a case for monitoring the amount of consumable material.
The electric styler Skil is now popular with consumers. If you also paid attention to this equipment, then it can be considered on the example of models:
In the first case we are talking about equipment,the cost of which is 2400 rubles. The second model will have to pay a little more - 3000 rubles. The first version of the equipment is an easy and compact tool for bonding different materials. There is an option in the design for adjusting the impact force. Weighs only 1 kg. The length of nails used varies from 15 to 16 mm. Staples can have dimensions from 8 to 16 mm.
The second of the mentioned models has similarcharacteristics. Its weight is one kilogram, and the size of the staples is between 8 and 16 mm. This tool has a rather long network cable at 6 m. There is a function in the design of the start-up lock that eliminates accidental operation. Consumers also like the stock indicator of consumables. For convenience of transportation and storage, the consumer will be able to use the case supplied in the kit.
If you need a building staplerelectric, then you can pay attention to the model that was mentioned above. Its cost is 5300 rubles. This stapler has a rubber grip, which makes the process more comfortable. Buyers choose this version of the device also for the reason that electronics regulate the impact power, this allows you to observe the accuracy when working with materials of different density.
The design has a convenient "Start" key,has a high speed mechanism, which quite simply copes with an impressive amount of work. Use the model can be complete with nails and staples. When consumers choose this model, they note that they like having a staple indicator. This allows you not to stop to check the balances of consumables. For controlled impact, the manufacturer supplied the model with the Push + Release system. The kit comes with 1000 staples, which, as the buyers emphasize, allows you to save on consumables.
Электрический степлер довольно прост constructively and has a narrow specialization, but you can perform many operations with it. Such equipment is functional and durable, but its cost is not so high, so this unit can now be found in the arsenal of almost every master.
