Optimal insulation of the house to date

In our country the climate is quite severe, thereforeThe insulation of the house plays an important role in the construction process. When building a new structure it is necessary to clearly imagine what kind of dwelling you want to get. You can talk a lot about design solutions and interesting projects, but the house in any case should be warm and dry. In this case it is desirable that its cost was acceptable even for an ordinary citizen. Those who made the insulation of a private house, understand that it will not be possible to do without a good thermal insulation material. By purchasing a quality product, you can significantly reduce heat losses.

Carrying out the warming of the house of wood, it followspay attention to the best option. It will be the use of a system of ventilated facades, which assumes an air layer. Thanks to it throughout the year, the walls remain dry, without losing any heat-shielding properties. The absence of such a gap is fraught with the rapid spread of mold due to high humidity. Thus, it must be remembered that in the process of work it is necessary not only to concentrate attention on thermal insulation, but also to take care of the structure itself, protecting it from the influence of external factors.

First of all, heat losses occur throughwalls of the dwelling, so their insulation should be given special attention. From the inside, heat insulation work is much easier, but this method has not been widely used due to the reduction of residential space. External insulation of the house has many advantages, expressed in protecting the structure from precipitation and other external influences. During the laying of the material, it is necessary to take into account the conditions under which it is proposed to use this or that thermal insulation system, otherwise premature aging of the insulation may occur.

Thermal insulation is considered a good optionplates of expanded polystyrene, when the material is glued to the surface of the facade. After the completion of the work, the whole plane is plastered with special hydrophobic compounds and painted. A high degree of waterproofing and good thermal characteristics helps to ensure the spraying of polyurethane on the outer surface. Outside, a film is formed, which protects the material from moisture. However, most often used plates from mineral wool, located between the bars. They are closed with waterproofing and decorative finishing in the form of ventilated facades.

If there is no possibility to hire a constructiona team of warming the house from the outside can be done on their own. For example, with a siding facing the thermal insulation material is laid between the bars, to which the final crate will be fixed. At the first stage, the location of the horizontal slats is selected, the interval between which is determined by the width of the insulation. The cross-section of the bars is selected depending on the thickness of the mineral wool slabs. Thermal insulation is installed in the lath so installed, which is immediately closed by a layer of waterproofing material.