How to properly glue the wallpaper in the corners: tips of specialists

Very often during the finishing worksthe customer decides to paste the wallpaper himself, believing that it is very easy to do, and saving money is not in the last place. It happens, of course, that the sticker succeeds, but most often the opposite happens. And it is good in the event that the work stopped after the first band, the material remained intact and almost unscathed. But in situations where some of the wallpaper is already on the wall (and glued somehow), and the other is cut (and wrongly), of course you can not talk about saving.

Why is this happening?

How correctly to glue wallpaper in the corners?This question often becomes a stumbling block for home craftsmen who do not have practical skills in gluing wallpapers. Possessing exclusively theoretical knowledge, it is very difficult to realize what was conceived into reality (and this applies not only to gluing wallpaper, but, probably, all spheres of our life). Therefore, having decided to make wallpaper wallpapering yourself, be prepared for the result, which can significantly differ from your expectations.

The main reasons why beginners can not cope with wallpaper gluing:

1. Ignorance of key points and fundamentals. Only practical experience can help in achieving really good results.
2. Uneven walls and corners, which can greatly complicate the process of performing works or completely stop it. That is, the preparatory stage was done poorly or not done at all.
3. The wallpaper itself, or rather their improper quality or marriage. Yes, sometimes it does, so even the most expensive wallpaper, bought to order, will not save you from a possible marriage.

Why do we need smooth walls and angles

First, aesthetics.After all, even the most expensive wallpaper will look sloppy on curved walls, and inexpensive, hand-picked wallpaper will look great on well-prepared walls. The second is practicality. During subsequent repairs, the walls will not need to be re-prepared. And even the wallpaper with a complex pattern is extremely difficult to glue on the curve of the corner, not only for beginners, but also for professionals.

The speed of work is directly dependent onsurface preparation. On some surfaces it is simply impossible to paste wallpaper qualitatively: concrete, loose or unpurified surface. You can continue to list, but the preparation of the surface is of great importance in the matter of how to glue the wallpaper in the corners of the room or on its walls. The correct preparatory stage applies not only to wallpapering, but to virtually all types of finish work.

Wall Preparation

Before proceeding to the question of how to glue non-woven wallpaper in the corners, you need to figure out how to properly prepare them. Let's start from the walls:

1. First, it is necessary to thoroughly clean the surface of the old material.
2. Then (if required), bend off the tubercles and make incisions. This is necessary if the surface was previously painted.
3. At the stage of wall preparation, the installation of the electrician is carried out, if it is envisaged.
4. Thoroughly primer the surface.

This is a mandatory step in the preparation of the surfacebefore pasting the corners with wallpaper, but here the actions of many may differ. And it depends not only on the desire of the customer or performer, but also on the condition of the walls and corners in the room. Possible plaster and putty surface. You can plaster the walls in three ways:

1. Partial alignment. Short strokes stretch the most "crumpled" sections of the wall. More suitable for "quick" repairs, which are usually carried out before selling.
2. Align the plane.It is carried out with the help of a long rule of 2.5-3 m. The horizontal and vertical surface of the wall is level (without bumps and dents), and the level remains the same, that is, unchanged.
3. Stucco by lighthouses. Using this method, the maximum level (along the plane and in the level) of the wall surface is achieved. Wallpaper gluing in the corners in this case is much simplified.
4. But most often use a combination of the last two methods: the beacons are usually aligned with those walls on which there are window or doorways, and the others pull out the rule.

Further on the walls, apply one or two layersputty, priming the surface before it. There are those who miss this important step, but it is recommended not to do so. Since regardless of the method of leveling, the putty can hide the flaws made during the plastering process, and also make the substrate uniform in color (important for certain types of wallpaper) and smooth to the touch.

Cooking corners

As you know, angles are external and internal.Their preparation is almost the same, unlike wallpapering the wallpaper in the corners. The only difference is that the outer corner is usually set on the level, and the inner one - on the plane.

The inner corner can be aligned as inthe process of plastering the wall, and after that. For simplicity, use a paint plastic corner with a grid around the edges, but it will be enough to pull it out with a rule, and when stuccoing the beacons (if they are correctly exposed), the angle stretches itself.

For finishing the outer corner using paintmetal corner. You can, of course, and plastic, but the metal will provide the corner with greater strength. To expose corners it is necessary only on a plaster mix though many advise to use shpatlevku. Remember that the putty is not used for leveling walls and corners, as the granularity of the mixture is very small and eventually the angle will necessarily fly out (perhaps, and not live to wallpaper wallpaper on the corner of the wall).

Preparation is a very important stage. This directly affects the answer to the question of how to properly glue the wallpaper in the corners.

We are raising wallpaper paste

How correctly to glue wallpaper in the corners of the room? First you need to properly prepare the wallpaper glue. To start a little about the choice:

1. Glue must be chosen strictly according to the type of wallpaper.
2. When buying, pay attention to the expiration date, as for wallpaper glue it exists.
3. Clay is bought with a margin. On the packaging, the average value of the glue consumption is usually indicated, but for bases with different absorbency this index may differ.
4. The price has no determining value, so there is no point in overpaying for brands.

For preparation of glue:

1. Use the proportions indicated on the package, which is especially true for beginners.
2. Do not use too warm or hot water, as you can simply not have time to fill up the pack to the end.
3. The glue is filled slowly with simultaneous mixing. This will protect you from the formation of lumps.
4. You can mix it manually (using, for example, a stick) or with a screwdriver and a whisk.
5. Do not forget to withstand the technological pause, after which you must again stir the glue.

The life span of a diluted glue depends on its brand: usually 7-10 days.

Adhesive wallpaper on an uneven surface

Yes, it happens, and not so rarely.And this is perhaps the worst option for someone who does not know how to glue the wallpaper in the corners of the room. If you decide to "save" on the preparation of walls and corners, you can safely forget about sticking all kinds of frescoes, photo printing or wallpaper, thin wallpaper of any type. Do not even try to glue the wallpaper to the inner corner entirely, that is, one piece to pass the corner.

It is better to proceed as follows:

1. Start gluing from the corner of the room, and it does not matter which one. The main thing is to get the first strip on the next wall by 1.5-3 cm, by gluing the angle itself (all the bumps and dents) well.
2. The first bar must be set on the level (the side that does not start at the corner). This will be more convenient using a laser.
3. The second piece is glued from the corner with an overlap on therelease the first cloth, which we left earlier. The side that is farther from the corner is set on the level (optional, if the cloth goes into the doorway or window opening).
4. Then we join two pieces of wallpaper.To do this, it is necessary to make a vertical cut (two sheets at once) with a wide spatula and a paint knife. Cut more conveniently from top to bottom, but do not tear off the blade of the knife from the wallpaper. After this, you need to remove the cut strips, apply glue (if necessary) and smooth the joint with a spatula.
5. It should be noted that in the presence of obvious bumps and dents on the wall to get a quality joint is almost impossible.

The outer corner is glued in this way, but withsmall difference. If the angle was not aligned (using paint angles), then it makes no sense even to try to pass it. It is better to cut the canvas on the corner and the remaining piece to start gluing the next side. Cloths are also exhibited by level. At the corner, you can then paste a decorative corner of a suitable size and color.

We glue the wallpaper on a flat plane

How correctly to glue wallpaper in the corners?On an even plane, this will be much easier. The angle without bumps and dents is pretty well pasted, but the edge of the outlet on the next wall will not be level.

Therefore, vertical pruning of both canvases is necessary. The procedure is approximately the same as in the previous case, but with a small difference:

1. The wallpaper with a not quite clear pattern can be cut without indenting, that is, on the corner.
2. If the pattern has a complex shape, then the firststrip the angle with the approach to the adjacent wall. The width of the approach is not of fundamental importance. The second strip is glued with a small (3-5 mm) overlap on the first piece. Then, using a knife and a spatula, we cut it. A small overlap will ensure a minimal cut of the pattern.
3. If the canvas comes out to the next corner in large pieces on both sides of the wall, then you can cut it along and dock in the corner with the cut edges.

Perfect option

The ideal is a qualitatively equalizedThe surface of the walls and corners along the plane and the level. Not so common, like really good wallpaper. In this case, with the question of how to glue nonwoven wallpaper in the corners, even the beginner will figure out:

1. The first band is set according to the level, and you can start from a corner or with a small approach to the adjacent wall.
2. Docking using a vertical slice is not necessary, since the angle has a clear vertical level.
3. The outer corner is glued in exactly the same way asinternal: with a call to the next wall. First, one side of the corner is glued, and only then the second. Bending around the corner with wallpaper, try to do this evenly over the entire height of the corner.

Conclusion

To the result in the question of how correctly to paste wallpaper in the corners, was good, it is sufficient to observe several conditions:

1. Avoid drafts. Stickers are made with tightly closed windows.
2. Try to avoid unmarked areas of glue. Glue on the wall is better to apply with a roller with a medium pile. Angles are smeared with a brush.
3. When docking strips or gluing corners, try not to stretch the wallpaper. It is more likely that after the glue dries, this joint will break (depends on the wallpaper).
4. Try not to allow air bubbles between the wall and the wallpaper. Cloths are smoothed by means of a special wallpaper trowel or brush.
5. The first from the corner of the strip (in both directions) must be set strictly on the vertical level.

To prevent electric shock, disconnect or insulate all points before starting work. It is recommended to remove the accessories of outlets and switches before gluing the wallpaper.