Современная сантехника характеризуется attractive design, and most importantly - it does not take up much space, which allows it to be located in bathrooms and bathrooms of any size. If previously the mixer pipelines were visible, then today it is possible to install the hidden method. Built-in faucets for shower and bath are ergonomic devices that perfectly cope with their functions, remaining virtually invisible.
The mixer built-in, as a rule, consists of:two main elements: the main unit, mounted in the wall, and panels with control levers. Each product can be purchased separately, which allows you to choose the design of the decorative panel in accordance with the interior of the bathroom.
The main interest is of the greatest interest.the mixer. It is thanks to him that the flow of water is controlled. In most cases, the block is presented in the form of a plastic cylinder, complete with threads and a brass head with four holes. Each element has its own purpose:
Consider the main advantages of the mixers built into the wall.
Naturally, for small and not very bathsThis device will be the best solution. And most importantly - the complete absence of protruding parts. Built-in faucet takes up little space, and a flat panel with a lever or control valves will leave space for bath accessories or small household items.
Particular attention is paid to manufacturersthe quality and reliability of embedded mixers. And it is not surprising, because the installation of this equipment is carried out in the construction of the wall with the expectation of for many years, thus completing the recently completed repair. After all, its failure involves a violation of the integrity of the coating.
Built-in shower faucets will turn waterprocedures in a pleasant and easy way. You will no longer fear unsuccessfully turn and break the protruding part in the shower or, even worse, get hurt. In this case, a couple of simple turns or taps are enough - and the flow of water is adjusted in the right direction.
It is foolish to deny that the mixer is builtlooks very stylish. The conciseness of the design, in which there are no unnecessary details, will decorate the bathroom like a designer installation. To use such a device is a pleasure.
When trying to adjust the required temperaturemode at a time, we spend 5 liters of liquid and 7 seconds of time. This problem is most relevant for apartments equipped with metering devices. This situation will help fix the installation of built-in mixer-thermostat.
In some situations, only a mixer of this type may be suitable, it is important to keep this in mind. For example, the need for the function "tropical shower", which implies the availability of this equipment.
Built-in shower faucets are structurally different from traditional devices and are installed mainly in the cabins.
This model does not have a spout thatIn principle, it is logical - it is not required for a shower box, a shower head with a hose is enough. As a result, this type of mixer is equipped with one inlet (to which the shower hose is connected) and two outlets (to which hot and cold water is supplied).
There are also built-in shower faucetshygienic type, installed next to the toilet, they allow you to completely replace the bidet. As a rule, a complete set provides for the presence of a flush-mounted mixer and a shower head with a hose, which are installed in the wall structure. These models also do not have a spout.
Встроенный смеситель для ванны подразумевает a rather unusual installation option - its installation is carried out directly on the side of the bath, in the most convenient place, and this is its indisputable advantage. In addition, this model is characterized by a number of indisputable advantages:
Built-in bath mixer can be twoTypes that differ in mounting method. Equipment for external installation is a monolithic block, which is fixed on the edge of the bath. In this case, the water mixing unit hides under the side of the bath. The flush-mounted devices allow you to leave only the spout and control panel on the surface, everything else is hiding under the bathroom.
Thanks to modern production technologies, flush-mounted mixers can be equipped with various intellectual functions, which brings additional comfort into our lives.
One of the new products you needstay in more detail, is a thermostat or automatic temperature controller. This element allows you to maintain a given temperature of water regularly.
After starting the water supply, the temperature is automatically regulated, which takes literally a fraction of a second.
In some models of built-in mixers the possibility of connecting the thermostat is provided, which can be purchased separately.
Чтобы установить встраиваемый смеситель для bathroom, you need to create a recess in the wall. As a rule, its diameter is 120-150 mm, and its depth is 85-110 mm. For these purposes, a perforator with a nozzle for concrete is used.
Для трубопроводов проделываются штробы.But before you do this, you should choose the place of installation of the spout and watering can. Grooves are laid from the designated points to the main unit of the mixer. It is important to note that the pipes in this design, which divert water, should not intersect with water pipes.
It is also necessary to lay pens forpipeline through which water is supplied to the mixer, they should begin to punch from the floor. But if you plan to plaster the walls with plasterboard, the need for strobing disappears.
Built-in bathroom faucet connects tothe pipeline is stationary, since all detachable connections are reliable elements. Due to the fact that the threaded connections and the central unit are mounted in the wall, increased requirements are placed on the installation. All connections should be as reliable as possible.
That the mixer built served as it is possiblelonger, during the operation there was no breakage, it is recommended to pay special attention to the material of pipelines that are mounted in the wall. It is not recommended to use metal-plastic pipes, as they use threaded connections and press fittings. It is recommended to give preference to polypropylene and copper products. Naturally, their installation is characterized by some complexity, but as a result the design will be more reliable.
In the market, plumbing from European manufacturers is traditionally considered the best, and flush-mounted mixers are no exception:
