Among the owners of suburban areas largeRecently, the development of own swimming pools has gained popularity. First of all, such a pond serves as an excellent place for bathing and rest. Also, it fits perfectly into any style of landscape design and serves as its decoration. Modern lovers of water recreation are offered a lot of opportunities to build a swimming pool with their own hands for a summer residence. However, in this case there are rules and nuances, some of which we will now consider.
Before you begin to build a dacha pool with yourhands, it is necessary to determine its dimensions, which directly depend on the size of the site itself. When choosing a place for a water body, one should focus on the general concept of landscape design. In addition, it is very important that a water pipe is laid near the pool. Then cleaning and replacing water will not be a problem for you. It is desirable that around the pond was a clean and level platform, without vegetation. If you decide to build a swimming pool for your own dacha and can not decide on its form, listen to the advice of specialists. They recommend choosing the simplest geometric shapes.
Stages of work
Любые бассейны для дачи, своими руками Built, require careful planning. To begin with, it is necessary to mark out the boundaries of the future reservoir. This is done with the help of rope, pegs and roulette. Then you need to excavate the pit. It is important that it is half a meter larger and one and a half meters deeper than the size of the proposed basin. The walls of the pit should be built with a slight slope - this prevents the destruction and shedding of soil.
The bottom is carefully leveled and tamped.Now you can proceed to the next stage - the construction of a building pillow. For this, sand is poured onto the soil, and several layers of roofing material are applied on top as a waterproofing material.
Organizing a place under the pool with your own hands forgiving, on its perimeter it is necessary to establish formwork. In the space between the wall of the future reservoir and the formwork should be poured a liquid cement solution. To strengthen the walls, it is better to strengthen them with a reinforced grating.
When the concrete solidifies, the formwork needs to be removed and the walls treated with cement mortar with water. You can apply it with a simple brush for whitewashing.
When all the preparatory work is finished,you can begin to equip the pool itself for your own dacha. To do this, put a steel mesh on the bottom of the foundation pit, laying stones under it. This is done so that when the concrete is poured, the mesh is completely covered by it. Then cement solution is poured with a layer no more than 20 cm. It is necessary to make sure that the bottom of the reservoir has a perfectly flat surface, on one side it is necessary to make a slope of about 5 cm. On this side, before the cementation, it is necessary to lay the drain pipe. If desired, you can overlay the walls and the bottom of the pool with tiles or primed and painted with oil paint.
Now you only need to improve the area in front of the reservoir and do not forget to clean it in time. It is important to remember that the smaller your pool, the more often it needs to replace water.
