Before proceeding with the analysis of plastic corners, familiarize yourself with the species diversity of curbs and the area of application of products.
The purpose of the material is to prevent water from seeping out and to get moisture between the wall and the bath, which, in turn, protects the plane from fungal and mold damage.
In the market there are various varieties of corners, produced from a variety of materials. Options border:
Each of the presented species is differentfeatures and possesses some characteristics inherent only in it. Before dwelling on one of the options, check out the short help for each type of corner.
From the wide range of products on the marketthis kind of product is considered one of the most economical ways to design a hermetically sealed protective layer. This version is easy to install and fastened to the surface using liquid nails or silicone glue. It can be attached both to the tile and to it.
A low price policy does not affectquality and range of products. You can easily pick up a convenient texture and a suitable color, which is important in the stylistic design of the bathroom, kitchen or any other room.
Do not count on the fact that the plastic skirting boardswill last a long time. From frequent changes in temperature and under the influence of moisture, they can crack, so they are subject to periodic replacement. Plastic products do not fully meet the requirements, as they are not 100% leakproof and slightly leaky.
To establish such a design is easy even for a person who does not have the skills to work with such materials.
Actually, these advantages, combined with the price, attract buyers of plastic corners.
Border length up to 2.5 m, but one plinth happensit is not enough to completely process the gap, so it is better to buy a baseboard in the amount of 2 profiles per bathroom, depending on the size sometimes more material is needed. The width of the products is 25 mm or 50 mm, and the choice of this parameter depends on the size of the gap. These are the standard sizes of plastic corners.
These are self-adhesive polyethylene ribbons,which not only perfectly copes with decorative functions, but also does not allow moisture to break through beyond the limits of a bath or shower. Manufacturers, focusing on consumer demand, try to make baseboards that differ in width.
It is easier to mount such products, and for additional reliability you can attach a sealant.
Durability and reliability - what attracts the buyer in ceramics. This is the best option for a tiled room, and using a ceramic instead of a plastic corner is quite logical.
Today, 90% of manufacturers make special corner parts that make the process of mounting products easier and faster.
If you do not have the skills of facing the wallstiled products, better not take up this job and refuse to glue over the area with ceramic borders for the benefit of another, simplified version. Leave this case to the masters.
Ten years ago to get a ceramic plinthfor the bathroom was unreal, so the craftsmen were engaged in the manufacture of this kind of products on their own, and having done the work, enjoyed the decent and spectacular view of the room.
In addition to the plastic corners and those describedabove, allocate and products belonging to a more expensive category: granite or marble plinths. Such products are characterized by long service life and give the room a solid look.
Mounting parts made of natural stone, followrecreating a uniform interior style in the bathroom or in the kitchen. For example, buy a marble sink or a bath bowl, trim a kitchen apron with natural stone.
The choice of this or that type of bathing corner depends on the preferences and capabilities of the host.
As already mentioned, plastic borders do notThey will completely protect against moisture, but this is not the main task of the product. The plinth only acts as an external material hiding a layer of sealant that protects it from light and direct water.
Interesting! Did you know that in 80% of cases, a full silicone spray can be used to assemble the corners on a bath?
For plastic corners for tiles not requiredpurchase of additional items. Immediately after the purchase, they can be installed on the prepared surface. Please note that the surface must be perfectly flat, otherwise water will flow under the curb.
Sometimes the font for water procedures is not tightadjacent to the wall and water constantly pours out through the gap, forming a favorable moist environment for mold and mildew propagation under a bath or shower. To avoid such a nuance, seal the joint with sealant, and place the baseboard on top.
Another argument of a larger scale,caused by leaks - damaged ceiling from neighbors, which entails considerable cash waste, because you have to repair everything from your pocket.
To avoid such trouble, mountcurbs, for example, plastic corners for walls. Please note that the installation of self-adhesive baseboards leads to the detachment of glue on especially mobile areas, as a result of which water is spilled on the floor.
It must be a light transmitting compoundmaximum transparent and viscous substance. By taking a mixture of a different shade, you risk spoiling the appearance of the walls or bath, as the glue comes out after gluing on top of the corner. Transparent formulations after drying are practically invisible.
При выборе материала учитывайте и особенности surface of the bath bowl. If it is made of acrylic, then it is better to take a narrow-spectrum adhesive - for plastics. For metal surfaces will require the acquisition of another type of substance.
Glue particles are easy to clean after drying.pasta. You can use a strong solvent or carry out mechanical cleaning. In cases where such actions are contraindicated with respect to the bath, for example, it is made of PVC, the remnants are removed immediately after installation, without waiting for the glue to harden. To do this, use a cloth or cloth soaked in white alcohol.
To install a plastic corner on a corner or wall, prepare the necessary equipment:
Before you stock up on all the necessarymaterials and tools, understand how and what to glue the plastic corner to the tile surface. The problem can be solved by analyzing the component composition and having additionally studied the instructions for adhesive mixtures present on the shelves of stores.
The installation instructions consist of simple steps:
The installation of a plastic decorative corner made according to a predetermined pattern will allow the construction to serve for a long time, saving it from moisture penetration for plumbing fixtures.
Now you know what to look for andwhat bathroom plinth to choose Pay special attention to the products of firms that are well-established in the building materials market. Then you will not have to doubt the reliability and quality of the installation.
