Feeder for feeder fishing is integralpart of successful fishing. Due to the light weight bait is thrown over a long distance and allows you to keep the nozzle nearby. Today you can find many types of feeders: they differ in shape and material. Before you make a feeder for fishing with your own hands, let's get acquainted with the characteristics and types of devices for fishing.
Metal feeders stronger plastic.But the second ones are indispensable when fishing in a pond with depth drops. After hooking such a feeder easily passes difficult areas. The metal device may not be particularly reliable, so when choosing, you should pay attention to the place of adhesion, the strength of the connection components.
Also feeders are loaded and normal.The first type has a high noise level in the fall. This may scare away the fish, especially if the pond is shallow. To avoid this, use a lighter trough of the original form. One that can prevent noise. In case of a strong current, they throw a tackle with a loaded feeder.
In addition, they are closed and open type.The first for strong currents are not suitable, because the water will wash the bait out of it. In this case, it is better to use a closed type of feeder. Before being thrown into a pond, a bait (maggot or small worm) is slaughtered directly into it. At the bottom, it is selected through the hole of the feeder, attracting fish.
There is another kind of closed device, inas a cell. It is called "rocket". Use it for long casts. Before you make a feeder for fishing, you need to pay attention to the characteristics. "Rocket" has aerodynamic properties, allowing you to use at the time of catching different weights of the sinker.
The most popular ones are open type feeders.They are used in reservoirs with a weak current or with stagnant water. For them, you need the most simple bait. Sometimes maggots, small worms or bloodworms are added. It is very important that the feed is loose. When the feeder sinks, it is necessary to make a small jerk so that it completely sinks into the water.
There are several feeders that fishermendo it yourself. One of them has already been mentioned - this is a “rocket”. Its peculiarity is that it is made from fishing line, and not from metal. Before you make a feeder for fishing, it is necessary to determine the exact size. Because it is designed for a large amount of bait.
The classic trough "spring" is designed for long casts. It is filled with viscous mixtures, for example, porridge with the addition of oatmeal and clay.
But the most original device for fishingis a "maze." Before throwing the feeder is placed in a container with a wormwood, he climbs inside it, and after that there is a throw. "Labyrinth" is suitable, rather, for delicate fishing. Because of its light weight, this device is far from being abandoned.
You should know that any of these types of feeders can be built independently. It happens that a hand-made product is more successful than a production one.
Experienced fishermen will surely remember the old-fashioned methodfishing on a donk: strong fishing line, big donka, large worm. Today, this method has been replaced by a new device - the feeder. With it, bait is delivered directly to the fishing spot, periodically activating the fish for biting. This device in the store is inexpensive. But there are situations when the fish bite, and at this moment the line breaks, in this case you have to buy a new feeder. To minimize costs, it is best to do it at home.
Before you make a feeder for fishing, you must prepare the following materials:
First of all, a strip is cut out from a grid sheet.required length. Next, the sections are gently bent inward and the strip is cut into equal parts. Before you make a feeder for fishing with your own hands, you need to decide how it will be shaped: round, triangular or rectangular. Once it is determined, the selected outlines are attached to the grid, and a wire is made of a wire for fastening the fishing line. Then sheet lead is folded several times and the resulting strip is folded in half, and a hole is made in the center. Between the two sheets, a wire fastening is threaded and the finished construction is threaded into the wire frame. At the last stage, the bolt is inserted through the drilled hole and fixed with a nut. So how to make a feeder for fishing at home is quite simple, then in an hour you can build up to 30 such devices.
Among fishing enthusiasts suchway of catching a cork. This gear belongs to passive methods. Cork is also called the modernization of the nipples. Most often with its help catch a crucian. Sometimes - small carps or bream. The mechanism is as follows: the feed is fed directly to the point of catching and is equipped with several hooks for fish. Sold several varieties of this gear. Various hooks can be purchased at the store.
Before you make a feeder for fishing fromcork, it is necessary to drill four holes in it symmetrically to each other. Then in three of them stretch across the crib and secure the leashes. Kembriki prevent chafing line on the edge of the tube. Leashes are made of 5 cm long fishing line, which is tied with a hook with a short forearm, then he will gently dive into the bait. Since you need to make the feeder for fishing correctly, then the nodes must be executed clearly. To do this, you can ask for help from experienced fishermen.
Next, the bait is placed on the hook and fixedSwivel hole with fastener, where the main fishing line is tied. Inside the cork they fix the weighting agent. For this, lead sheet is used, from which a small piece of cylindrical shape is cut out. In size it must be less than a cork. To fix the sinkers, a hole is drilled. And then connect the cork with the load with the help of wire, twisting a few turns inside the gear. After that, viscous or tight bait is slaughtered there so that it is washed away with water. Next, the hook with the nozzle is inserted into a ring down so that it hides. So we looked at how to make a feeder for fishing from wire and cork.
