There is nothing more pleasant than to invite your friends to a dacha on Saturday and treat them to a shish kebab, which will be cooked on the mangal made by himself.
Select a location
The choice of a place is very important.Stationary brazier is better to be located away from home, so that to the nearest building was not less than 5 m, but taking into account that the place was picturesque and secluded. It is better to arrange the table so that the brazier and all the space next to it are clearly visible. It's very good if there is water near it. Then you need to install a cock with a hose in case of fire.
Foundation
Make a stationary BBQ with your own hands frombrick is not only possible, but also preferable, because in this way you can realize your own ideas and decisions. For the foundation you need to dig a pit 30 cm deep. The stationary brazier made of bricks is massive enough, so it is necessary to provide a foundation. The width and length of such a pit should be slightly more than the planned construction. The bottom is first covered with a layer of sand, then a layer of rubble. On top of the rubble you need to lay a metal rod, which will play the role of reinforcement. The aboveground part of the foundation is poured with concrete. For this, a formwork is installed, the height of which is 10 - 20 cm. The composition of the concrete solution: 1 part of cement, 2 parts of sand, 3 parts of rubble.
Base and top masonry
Brick for masonry walls is suitable for anyone.The height of the masonry will be no more than 7 - 9 rows of bricks. From the hearth, the masonry will not be more than three rows of bricks. Blowout is optional. Further, the masonry continues with refractory bricks. You can lay the metal stripes, and on top of them put a series of fireproof bricks around the perimeter. Then stack one more - two rows only on the sides. To install a barbecue grate on the sides, it is laid on the brick, but across the masonry.
Installation of metal parts
For skewers a special stand is made ofmetal corner. For the stops of the corners in the laying of walls are installed in the seams between the bricks and the pins are firmly immured. For the cleaning of ash to the bottom of the cavity for coal, you need to put a metal sheet, which in size should be slightly smaller than the bottom, so that the pallet can be easily removed. And now the fixed brazier is built and ready for use.