Every car owner was faced with this phenomenonas rust formation on the vehicle body. You can remove red spots from the surface by yourself, using folk remedies. Very often you can hear the question: how to remove rust from the car body without damaging the paint? Unfortunately, this is impossible. After all, rust is formed not on the surface of the paintwork, but on the metal.
How to remove rust from the car body with your own hands? This process can be divided into several main stages:
To remove rust from the car bodyIt was successful with your hands; you need to carefully prepare all the damaged areas. Wash the vehicle well. This can be done manually or by means of mechanization. It is recommended to use special sprayers. Dirt should be cleaned inside and outside the body. Wash also luggage and engine compartment. This will allow you to carefully inspect the metal parts of the vehicle.
Для лучшего результата можно использовать car shampoo. This tool allows you to remove not only dust and dirt, but also grease and salt. At the same time the car shampoo is able to protect the paintwork. The composition of this drug is not toxic components, formaldehyde and phenols.
Rust removal from your car bodyhands - a process that requires careful preparation. After washing the vehicle must be dried well. To do this, the body should be wiped several times with a sponge or cloth. This will remove residual moisture. Otherwise, stains may form as a result of natural drying.
После того как автомобиль будет готов, стоит carefully examine it and identify all damaged areas. It is then recommended to install protective covers that are designed to protect entire body parts from the entry of paint and chemicals.
So, how to remove rust from a car body? Popular methods in this case may not help. Therefore, it is recommended to choose one of the traditional methods:
To carry out the removal of rust from the car body with your own hands can be in the garage. The main thing is to determine in advance the method and prepare everything necessary.
To begin with, the area where there isrust, it is worth carefully wipe with a metal brush or sandpaper. It is necessary to be careful, as the material that has undergone corrosion, easily destroyed. When processing the surface with sandpaper, you can resort to the wet or dry method. Moisturize the material can be white spirit or kerosene. Grouting should begin with a coarse sandpaper, and finish with a sandpaper with a smaller structure. This allows smooth surfaces.
You can also use a grinder to remove rust. Clean the damaged area to smoothness. After processing on the metal there should be no rust.
If you choose a mechanical cleaning method, you should use protective equipment: gloves and glasses.
This is another mechanical removal method.rust from the body. Sandblasting is considered the most effective and safe for metal. The material is cleaned of rust due to a stream of air containing sand particles. At home, this method is not available to everyone. After all, work requires a sandblasting machine.
This method allows you to completely clean the damaged areas. When using a sandblaster it is also recommended to protect eyes and hands.
Rust removal is carried out by chemical meansusing various reagents. Such means help prevent the development of corrosion in already damaged areas. At the moment there is a fairly large range of rust converters. The list of the most popular includes:
Rust removal from the car bodyphosphoric acid or special formulations is an uncomplicated process. At the same time the surface is protected from further destruction. As for rust, it is converted to a substance harmless to metal.
After stripping the treated areas of the bodymust be degreased and coated with a layer of anti-corrosion primer. This is required only in cases where the metal is completely free of rust. If the material remains covered with factory primer, then you do not need to apply another layer of primer. This tool allows you to protect the metal from corrosion, as well as provide better adhesion to the means that will be applied to the surface of the body. Primers are as follows:
Once the surface is prepared, it is worthapply a layer of putty. It also needs to be leveled and made smooth with a moisture-proof skin. Putty can be applied in several layers. Each time its surface must be leveled sandpaper. Each section should be flat and smooth. After that, it is recommended to apply another layer of primer so that the paint is better kept on the treated areas.
After that, you can proceed to the selection of coverage.Tint paint should match the color of the body. It is best to select the color in the auto repair shop. You can find out the number of coverage in the passport of the vehicle. Coloring of the treated areas should be done using the spray gun. At the same time it is necessary to impose at least three layers. Do not forget about the means of protection.
Properly cleaned the body of rust, as well as its painting significantly increase the life of the vehicle.
