The vehicle is a titbitfor the hijackers. The exception was not the motorcycles. In the city to leave such equipment unattended is fraught with its hijacking. To date, there are many protective equipment to protect the bike from theft.
Installing an alarm on a motorcycle is one of the most reliable ways to protect a motorcycle from theft and encroachment by third parties.
В условиях оживленных городских улиц нередко have to leave the bike unattended. Various locks, chains and other means of protection of the vehicle are ineffective against thieves - you can cope with them using a conventional mount. However, to protect the bike from theft, you can use the alarm system. When choosing such equipment you should pay attention to certain parameters:
Installing an alarm on a motorcycle with your own hands will help protect the vehicle from encroachment and theft.
Today there is a hugethe number of models and brands of anti-theft systems that differ in the degree of protection of the vehicle. The cost of the alarm can reach tens of thousands of rubles and vary depending on the manufacturer, the sensitivity of the sensors and additional functions.
You can choose a model from any price range- as a budget option, and luxury. Most motorcycle owners are trying to pick up expensive systems, as they provide the best level of protection and have additional features. Such models are also simple and easy to use.
The most affordable in terms of cost areChinese systems, however, they have their drawbacks: the sensitivity of the sensors is too low with a high signal level. Installing an alarm on a Stels motorcycle, made in China, will provide an average level of protection, which is quite enough to protect vehicles from encroachment.
There are several types of sensorseach of which is responsible for certain parameters. Installing an alarm on a Honda motorcycle requires several of these elements at once controlling the volume, inclination and impact.
The volume sensor is responsible for approaching the motorcycle.any object, ranging from other vehicles and ending with birds and animals. The benefits of this device are indisputable - it reacts to a person before he gets close to the bike.
The shock sensor responds to a touch on the body of the motorcycle. It is usually installed in a pair with a volume sensor and complements its functions in case it does not work.
Mercury device is most often installed exactlyon motorcycles, because in order to move the bike from the place, it must be tilted to remove the steps. If you buy sensors separately, they will cost a little more than bundled with an alarm system.
Installing an alarm on a motorcycle impliesselection of the most suitable system. Which is best to choose - automotive or motorcycle? The overwhelming number of devices designed specifically for motorcycles, at a cost almost equal to automotive systems, while their level of protection is very low. As a rule, such devices are monoblock, that is, in one case electronic “brains” and a siren are combined with a tilt sensor in the kit. The purchase of additional items may result in costs that are comparable to the acquisition of a complete system, and not all models allow you to connect sensors. Accordingly, if you buy an alarm for a motorcycle, then only from proven manufacturers, high quality and fully equipped with tilt, volume and impact sensors.
One of the best options ispurchase of conventional car alarm and its subsequent installation. The functionality of such a device is much wider than a conventional motorcycle system, and the cost is often even lower with high quality. Installation of the system is not difficult. You can contact the service center or workshop, which provides a service such as installing an alarm on a motorcycle. Instructions included with the anti-theft system will help to mount the equipment on your own.
Installing an alarm on a motorcycle is not alwayshelps protect the "iron horse" from hijacking. To ensure the maximum level of protection, it is advisable to install a kit from an anti-theft system and a remote surveillance device, or a GPS beacon, on the bike.
Essentially, all cases of vehicle theftthe same: the hijacker neutralizes the anti-theft system and either drives off on a motorcycle or takes it away in a truck. On the one hand, vehicles may be irretrievably lost, and on the other hand, an inconspicuous beacon will help track the movement of the bike and find it. With this device you can not only control the location of the motorcycle, but also track its speed. All data can be immediately transferred to law enforcement.
After the acquisition of the beacon begins installationalarm on a motorcycle. Immediately prior to installation, a SIM card of a cellular operator is inserted into the device, which is attached to the mobile phone of the motorcycle owner. After that, the beacon is installed in an inconspicuous place on the bike, and the time interval is fixed, through which messages will be received containing information about the state of the motorcycle.
These GPS beacons, mounted in conjunction with a full anti-theft systems, have their own advantages:
The main feature of this device isthat he catches the reflected signals, while he himself is almost impossible to detect. The cost of such an alarm is very affordable, and together with a full-fledged system, it will provide the maximum level of protection for the iron horse.
Anti-theft alarm system can be created independently. To do this, it is enough to purchase the necessary components in a car shop:
All parts are connected to each other according to the finished schemes.
На автомобильном рынке представлен широкий assortment of motorcycle alarms. The high level of reliability and quality ensured their popularity and relevance. The necessary knowledge of how to set the alarm on the Orion motorcycle is available only to specialists working in car-care centers, since the installation process itself is a painstaking job that requires care. If the system is installed and connected incorrectly, there may be problems with the motorcycle electronics, which will be very difficult to fix.
Not every owner of the "iron horse" knowshow to set the alarm on the motorcycle "Mustang". Necessary information can be obtained either from specialists or in the instructions that come with the anti-theft system.
The process of installing protection on a bike is nothing complicated. You can cope with this on your own, without the help of experts.
После установки сигнализации проводится проверка its performance. Anti-theft system protects the motorcycle and protects it from theft. In addition, the nervous system of the vehicle owner remains healthy. Properly selected protection for your "iron friend" will serve you faithfully for many years.
