Every boy dreams of being brave in his childhoodsailor. Attracting the kids amazing sea voyages to distant and unprecedented countries, unforgettable adventures and, of course, a beautiful shape. There is an opportunity to make your child such a small, but amazing gift - to stay in the role of a brave sailor at least on New Year's holiday. We must prepare a white shirt, blue shorts and a cap. Do not get it sewed from the fabric, you can use strong paper. Interested in how to make a cap of paper with your own hands? Very simple.
For the manufacture of seaman headgearany thick paper is needed, the ideal is a large sheet of Whatman paper. First you need to measure the circumference of the child's head. To skimmer sailor from the paper kept on the head well, you need to add to the size you have added three centimeters. This will be required for gluing and loose donning.
When the head is measured, it is necessary to draw on the paperparts. The first detail is the rim of the cap. To make it, you need to draw a strip with the appropriate dimensions. The length should be equal to the circumference of the head and plus three centimeters. The height of the strip is 5 centimeters. Then we need to draw the top. To the baby was a fit of a capillary made of paper, it is necessary to make the top volume. For this we need to draw two circles. The radius of the small circle (and this will be internal): the length of the circumference of the head, divided by 0.6. Having obtained the radius of the circle, it is necessary to draw the circle itself. Then, to the resulting value, that is, to the radius of the small circle, you need to add 7 cm. This will be the radius of the large (outer circle). From the value obtained, we also draw a second circle. When plotting, it must be taken into account that the center of both circles must be one. In the finished form should be a circle, in the center of which is a round hole. It must then be cut. Next, you need to cut another circle, equal to a large one. Now it is already clear how to make a cap of paper with your own hands.
When three paper parts are ready, you canproceed to join. Initially, you need to glue the PVA glue with two circles. To do this, around the edges of the circle, which without a hole, glue with glue, from above put a circle with a hole. The edges should be tightly connected, but it is necessary to pay attention that the glue does not hit the main part. While the round details are glued together, you can tackle the side. In this case, there is nothing complicated. It is already clear how to make a cap of paper. The ends of the strip must be glued. When the edge is dry, you will need to attach the top to it. For this, it is necessary to make notches or incisions on the lower circle (which has an aperture). Scissors along the entire radius need to cut lengths of about 5 mm in 3-4 cm. Then bend them and gently glue to the edge. Allow the workpiece to dry. Now we know how to make a cap of paper with our own hands. Time for this will take a little.
When the preparation of a seaman headgear is ready,you can proceed with its design. You can paint the edge before gluing with blue paint. This is certainly fast, but not very interesting. It is better to use a blue satin ribbon for this. It can be glued to PVA glue, or use a thread with a needle and gently fixed in several places. Stitches on paper need to be done small, and you need to pay attention to the needle was thin and sharp, otherwise you can tear the edge. Also, you need to burn the ends of the ribbon with a match, so that it does not then bloom. Satin ribbon along the length should be twenty centimeters more than the size of the head circumference. After all, the sailor ribbons develop in the wind. Therefore, attaching it to the side, you should start sewing not the ends, but at a distance of ten centimeters from the end. Now it became known how to make a cap of paper with their own hands. Before you put a sailor's suit on a baby, you must not forget about the attributes. To do this, the front cap must be anchored. It can be cut out of velvet paper, and you can purchase ready-made applique. With a velvet anchor, with a fluttering satin ribbon, the kid will feel like a true conqueror of the sea. You can also make a real sea collar (you can also not cut out of fabric, but cut it out of paper).
