Техникой квиллинг увлекаются многие и опытные masters, as well as people who first tried themselves in this kind of art. It captures this hobby from the first time, I want to make another crafts at once, to master the ability to create new shapes. What is quilling? It is a curl of paper with a metal hook. It would seem that it can be monotonous and monotonous. However, there are an incredible number of different types of crafts made in this way.
The shelves themselves differ not only in color, but alsothick and wide paper. For crafts you can find in the handicraft stores a variety of different sets, selected by color. For a start, you can practice doing the quilling colors. This is the easiest way to learn how to crochet and form parts from strips. In addition to those for crafts you can choose a lot.
In the article, we will consider quilling colors forbeginners with photos, let's figure out how to make petals and leaves for flat and three-dimensional pictures. We will also advise what materials to get started need to be purchased, what can be replaced with professional tools for crafts so as not to waste money on the first samples.
If you decide to try your hand at artquilling flowers, then first buy a set of strips for the first job. You need to start learning from the simplest twisting of tight and hollow skeins. For a start, you can not buy a metal hook, but use a toothpick or a wooden skewer with a slot at the end done with a knife.
A strip of paper is inserted into the slot andturning the sticks winding the desired length on the skein. For quilling flowers you will need to twist a lot of identical parts - petals or leaves. In order for them to be the same size, it is more convenient to use a template ruler. It has many holes in the shape of circles of different diameters. How to use this tool, you will understand from the further story.
To learn how to perform quilling colors, forbeginner masters can be advised to practice twisting tight tight hanks. Even in this way, you can make the first crafts, and voluminous. To begin, we will use a simple toothpick. The middle of such a flower, as in the photo below, is made of yellow and brown stripes. The first strip is attached to the toothpick and, holding the paper with your fingers, begin to wind it tightly around the stick.
Flowers in the technique of quilling are obtained neat, if the edge of the strip is evenly attached to the last turn. Used for the work of PVA glue. Only thick and fresh material will do.
Then brown is stuck on the yellow strip.and winding continues to the desired thickness of the part. If one strip is not enough, then the second is taken and attached to the edge already twisted, and the movement continues. When the middle is ready, wide strips of pink and lilac are taken to create petals. For work you will need scissors. If you do your own hands on quilling flowers for the first time, you will have to prepare for a long and scrupulous work, because you need to cut one edge of several strips with thin “noodles”. The action does not occur until the end of the paper, as there should be a small distance for winding. When you fall in love with quilling colors, you can purchase special scissors for such a procedure. They have several blades and with one click on the knobs a lot of "noodles" are cut at once.
After preparing all the details work beginsby twisting wide strips. The edge of a wide paper is attached to the dense skein of the flower core and start rotating the toothpick around the axis, pressing the paper with your fingers.
Beautifully look multilayer quilling flowers(photo samples above), in which the strips of paper have not only a different color, but also the width of the strips. When gluing the finished crafts on the cardboard, they smear the back side with glue and gently press it with the palm so as not to crush the noodles. She, too, is carefully laid out on the sides. To complement the image in the picture can be a stalk of green. To do this, you need to smear the green strip on the end part and attach it to the flower bottom. Surprisingly, the band will remain "in place". In the same way you can attach a few leaves, for the manufacture of which the paper must be bent in half.
Рассмотрим, как делать цветы из бумаги квиллинг for beginners in a different way. It does not require tight winding strips, the actions are more relaxed, without tension. In the photo below you can see what a professional quilling hook and a template ruler look like. Holes are designed to comply with the same size for all components of the flower.
Consider an example of making a flower, as insample below. You must create five identical elements. They must be clearly the same size and shape, otherwise the flower will look asymmetrical and sloppy.
For each petal will require two strips.First, the first strip is wound loosely on the hook, then another one is glued to its last edge, and the manipulation continues. Then you need to insert crafts in one of the holes template line. Only then can you remove the hook. In the hole, the paper expands freely and becomes necessary for us. Apply a drop of glue on the brush and gently apply it to the edge of the strip. Then press down this place with your hand to hold the elements.
Thus, the desired number is produced.blanks. To get the petals of elongated shape, the workpiece after gluing is pressed down with two hands. To do this, thumb and forefinger of both hands need to pin down on opposite sides of the workpiece. After squeezing, the paper will retain its shape until the end of the work. Then the petals are placed on the cardboard in the correct configuration and glued. PVA glue is spread on the back side with a thin layer. The glue should not fall into the middle of the coil so that the strips inside the handicraft do not stick together.
The middle of such a flower can be decorated with a dense skein (you already know how to make it according to the previous description) or mark it with a bead, as in the photo.
As an example, quilling colors forBeginners step by step can be offered to perform a holiday card with one flower. A two-sided colored sheet of A4 paper folds in half and a white cover is stuck onto the front side. It is made of paper of a smaller size so that the claret base can be seen from all sides.
Для каждого лепестка используем только одну strip, so the element will turn out less filled and will look openwork. First, each strip is wound on a hook and lowered into a patterned ruler with a large hole. Then the roll is removed and the paper is unfolded. Edge crafts brush smeared with a thin layer of PVA and pressed to the last turn. Then the workpiece is removed from the template and pressed down with two fingers on both sides. If you want to create a thinner petal, increase the squeezing force of the fingers. How to do this, described in more detail earlier, will not be repeated.
When six identical blanks are made,place them with sharp edges in one point and attach, spreading glue with PVA. From the green strip by bending we perform a small stalk with a small leaflet. Attach it, starting from the gap between the petals, and at any angle, if desired, you can bend the strip beautifully. You already know that glue is applied only on the end part. In order for the part to be attached, you need to gently press it down onto the sharp edge of the strip with the palm of your hand. In no case do not move the paper and do not push so as not to bruise the stalk.
Серединка создается из одной полоски желтого colors. Use the smallest template to make a small circle. Pasted middle in the second tier on the petals. If desired, you can decorate the corner of the postcard with red trefoil.
Quilling colors for beginners includes in yourAn assortment of a huge number of variants of petals. Consider some of them on the sample below. All the petals are initially made according to the standard procedure - winding one or several strips of paper on a hook, then a template is selected on the ruler and the blank is inserted into the hole. Only after the edge of the petal is fixed can one begin to form it. Pressing with your fingers may look different.
How to make a flower from quilling, considerfurther in the article. You already know that the shape of the petal is created by squeezing with your fingers. Thus you can create a semicircle and a triangle, the shape of a droplet and a heart, square and crescent-shaped. Shapes can be made equilateral and with one edge extended. There are elements that are often used by craftsmen, and there are rare details. Interesting quilling flowers are obtained from the unusual form of petals. For example, if you need to create long and thin petals of asters or chrysanthemums, then you can first flatten them in a thin strip and then curve them with a wavy line.
Petals made from several flowers look beautiful. Seredinki, mainly created by dense skeins or cut into "noodles" strips.
Очень эффектно выглядят лепестки, внутренняя some of which are assembled from several openwork details. On the sample below it can be seen that for the manufacture of such a flower, free blue hanks are first twisted, and then each petal is shaped into a droplet shape. Combining the two "drops", the entire structure is wrapped with a yellow stripe several times. Petal ready!
After all five petals are collected, you canstart picking the flower together. To make volumetric quilling flowers, the parts are glued with only one central part. The edges are straightened up. The inner opening between the petals is closed with a center made of a wide yellow stripe, sliced "noodles".
Даже один красивый цветок способен придать The unique beauty of a greeting card. You are already familiar with the methods of making petals. The leaves in this sample are made on the same principle. Let us dwell on the assembly of volumetric crafts. After making the first thing are the flower petals on the cardboard. To make them look voluminous, a substrate is made of a large, dense skein of blue. Already on such a circle, created quilling-petals are glued. After the glue has dried, the edges will be slightly bent out. The central part of the flower is filled with three identical yellow hanks.
Small stalk is done as usual, from thin greenstripes. PVA smears only the end of the paper. It remains to twist the three green leaves, press them down on both sides with your fingers, making symmetrical ends, and attach the stem on different sides.
Creating a floral arrangement of stripesquilling, details can be placed as desired. The easiest way to do a flat picture in which all the elements are located on the same level. However, everyone understands that if you arrange the parts in tiers, the image will become more voluminous and more spectacular.
Цветы могут прикрепляться один на другой со offset. To raise the flower above the level of the base surface, use the method described above for making the substrate of taut skeins. Their shade should match the main color of the plant. The leaves near the flowers can also be glued both smoothly and at any angle. If you worry that the part in this position will not be able to hold, it is better to use a glue gun.
After you learned the basic ways of workingWith quilling stripes, you can try to create an easy crafts in the form of a basket. First you need to cut the base of durable cardboard. You can use corrugated packaging material, only for brightness it is necessary to glue it with colored paper. Then comes the painstaking work on the manufacture of tight hanks. Make them need a lot, with different colors and thicknesses. Combining elements, the basket will look original.
After all the parts have found their place ona mug of cardboard, you need to cut a handle out of brown cardboard and stick it on the basket. It remains to decorate it as a hank of tightly curled paper, and flowers. No wonder we learned to do them. You can dream up and try to create a butterfly. The principle of manufacturing parts is similar.
Надеемся, что статья помогла разобраться novice craftsmen, how to make simple flowers from quilling strips. As you can see, even inexperienced craftsmen can create beautiful crafts, postcards and even voluminous interior items, knowing only a few ways to twist parts.
