Internet surfing in recent years has become availableany person. And it's true - without leaving home you can get information on any issue. But, unfortunately, it happens that you start the browser, and the site does not open. Why? This question itself is asked by almost all users who once faced such a problem. Let's look at the causes of this phenomenon and how to correct the situation. Depending on the very reason for the appearance of such failures and solutions, you can offer quite a few different options.
Probably, many noticed that sometimes when typingaddresses of the requested resource, instead of opening the necessary page, various messages are given that the site or service is unavailable, the waiting time has expired, the site does not exist, and so on.
In general, variations in such notifications can bevery much, and not always their appearance is due to incorrect settings of the local terminal or some kind of incorrect actions by the user himself. It is possible that some of the global causes, so to speak, are to blame for this, which are further suggested and considered in full.
When considering the main issue, we will proceed from the fact that the user with the Internet connection is really all right. But why then does not open a single site?
Among all that could serve as the reason for such a phenomenon, there are several basic ones, namely:
In the list above, only explicitreasons for this phenomenon. In fact, they can be much more. But we will only consider these options, since the elimination of such problems often allows you to get rid of some of the attendant problems that conventional methods can not always eliminate (even some preventive measures do not work).
So, some kind of site does not open.What to do? To begin with, you just need to reload the page. If an error is displayed in the browser about the fact that the service is temporarily unavailable, you may need to wait some time, then try again. In the case where there is a link to nginx in the notification, this is direct evidence that your browser running on Windows is incompatible with a resource that is running UNIX. In principle, this is not a problem. It is worth pausing and retrying the access attempt. It is possible that the server was simply overloaded. Worse, when a DDoS attack was performed with the number of requests exceeded, when the server simply does not have time to respond to them. These situations, of course, we will not consider, but we will pass to more pressing problems.
On the other hand, one should checkconnection, especially if Internet access is via wireless technology through a router. To start, if sites do not open in Windows 10, for example, but the router signals that the connection is established, try to enter the Internet from any other device, say, from a mobile phone. If access will be, the problem is in your computer, otherwise - in the network settings. But do not rush to change them. A fairly common problem with the fact that a site in the browser does not open is a violation of the router itself. To restore its normal operation, you must perform a full reboot with reset settings. The Reset button, which is usually on the rear panel, is not even worth trying. Anyway, the expected effect will not. The most preferable way is to completely disconnect the router from the mains with a pause before switching on again about 10-15 seconds. Some experts advise to withstand a longer period, but it seems that for home models of the TP-Link series this is quite enough.
After turning on the sensor should blink on the router,indicated by the icon of the Internet. If it does not burn, it seems that the problem is with the provider. Contact Support. If the ping of your router does not work properly, it can very well be that the problem is in the hardware. If the provider determines your router, but the requested site does not open in the browser, it is possible that the problem is either in the access settings on your part, or in the restrictions that can directly affect the requested resource.
For example, if you try to accessInternet radio stations in the United States from the territory of the former Soviet Union will be notified that access to the resource is prohibited from this region, and is intended only for those users who are territorially located in the United States. On how to bypass such restrictions, we will stop later. For now, a few words about possible problems that can arise on user terminals or even mobile devices.
Why do not the sites open?Yes, only because the user's computer displays incorrect settings for access to the network. You can check them by changing the properties of the adapter, where you select the Ipv4 protocol setting. Immediately note that at the time of wireless connection all addresses must be received in automatic mode. In this case, we are talking about the use of dynamic IP.
If any site does not open, trySet a static address, which must be the last digit from the address of the router. For example, the address of the router is usually represented in the combinations 192.168.01 or 1.1. Set for your terminal the address 192.168.0.6 or any other last digit, save the changes, restart the system and check access to the Internet.
Why do not open the site, a little understood.But the solution to the problem is still very far from over. In fact, even if the automatic settings in Windows are set, communication can work quite differently than it should.
Here it is worth considering that the use of a proxyis possible only if it is provided by the provider. Check the IPv4 settings again, and in the advanced options, uncheck the use of the proxy for local addresses, if any.
On the other hand, with these settings everything canbe in perfect order, but, say, HTTPS sites do not open. In fact, the addresses of such resources represent availability only as a secure connection, and the settings of the primary or alternative DNS server can not always convert domain names into such digital queries. In this case, it is about changing their addresses, in spite of the automatic receiving default. Here it is necessary to apply the most common and popular combinations from Google, which are presented in the image above. Just write this information in the addresses, save the changes and check if access to the necessary resources has resumed.
But, suppose, and after that some site is notopens. It can be connected even with the settings of the default browser, which accumulated a huge amount of computer garbage in the form of a cache, temporary files, cookies, cached images, etc. Ordinary users do not think about cleaning up browsers. But there are no automated tools for this in any well-known browser. A cluttering of the browser just leads to the fact that in the same "Opera" sites do not open.
In this situation, there are two outputs:either clean up the history by deleting everything that was mentioned above manually, or entrust this matter to optimizer programs like Advanced SystemCare or CCleaner, which are considered leaders in the market for software products for cleaning and speeding up Windows systems.
Even after optimization, the requested site is notopens, you can act in a completely cardinal way, setting a complete reset of the browser settings to factory settings. This feature is available in all browsers, regardless of the developer. By the way, this option sometimes helps when removing virus threats of an advertising nature.
How to open a website on the Internet, knows any user. To do this, simply enter the usual address. But what if the address is correct and the internet connection does not work?
There will have to use cardinaltools that are available in any operating system, the latest generations of Windows. To begin, call the command prompt with administrator rights via the “Run” console by typing the abbreviation cmd in the program field. If the launch on behalf of the administrator will not be performed, you will have to find a similar EXE file in the System32 directory and run it on behalf of the administrator through the PCM menu.
In the console that appears, you should register the following:
Это приведет к полному сбросу настроек DNS, а most of the problems are connected with them, except for the settings of the DHCP server on the router. But in this case it is assumed that everything is in order with the parameters of the router.
Finally, let's see why it sometimes does not open.Yandex site. There are no prerequisites for the occurrence of problems. But! In Ukraine, recently, almost all Russian-language news, search resources and popular social networks have been blocked. And if Yandex with its start page is still somehow loaded, other sites like Mail.Ru or VK are not at all. And then, with a sin in half by downloading the home page of Yandex, it will not be possible to use any of the available services.
How to open a site that is blocked atof the state? Yes, elementary! No one has yet canceled the use of so-called VPN clients. In any browser, you can install the appropriate add-on / extension.
In the "Opera" everything is simpler, since it is inIn this browser, this client is built into the shell itself. It is enough to activate it in the settings for the first time, after which the corresponding switch will appear to the left of the address bar. When activating the mode, the choice of the server from which the user will connect is made automatically. If you need to change the location, you can do it manually, specifying the preferred country of the location where the user's computer is supposedly located.
But you can cite another completelya non-trivial example, when the YouTube website does not open. Of course, there were no such problems in the post-Soviet space, but in China and North Korea, yes. Access is restricted even to such popular social networks as Facebook and Twitter. The worst thing is that the governments of these countries have attracted such tough specialists who created a firewall (blocking barrier) at such a state level that no VPN clients help, and the use of such applications is carefully monitored and at the slightest suspicion punished. .
But we got a little distracted.If a website does not open, it does not mean that it is the operating system, the browser settings or incorrect actions of the user that are to blame. Far from it! Here we are confronted with viruses, which are now so many on the Internet that it is impossible to imagine. Not to mention the malicious codes that cause irreparable damage to the operating system itself, the most widespread viruses are related to the so-called browser hijackers (categories Hijackers and Adware).
Such virus applets even called virusesThis is not possible, since most of them have all trust rights to install as affiliate software, and some of these applications also have supposedly official certificates of authenticity. At best, they are recognized as undesirable software. And for this reason, most of the antiviruses when starting the installation in the background, which the user either doesn’t guess or agreed to when another installer triggers (most often repack games), the installation of such applets is simply ignored, considering what is happening as the official software installation.
To deal with this can and should be.For starters, you can use portable type scanners like KVRT or Dr. Web CureIt. If it turns out that the virus is deeply embedded in the RAM, you will have to use programs like the Kaspersky Rescue Disk. This is a disk utility that, when writing to removable media, if it is set first in boot priority in the BIOS settings, starts even before the operating system loads and detects such viruses that many would never even think that such threats exist on the computer.
Actually, this is all that can be briefly said aboutthe problem described. Probably, it is clear that the reasons for this phenomenon may be much more than those that have been described. For example, it is clear that there were not considered problems associated with similar situations when connecting to local or virtual networks, when addresses of each device are assigned automatically or by a system administrator, but the server from which the request is made does not work. This is, so to speak, special cases, but in the general understanding for each user, the presented solutions in most cases allow to solve the problem when access to some resource is impossible or blocked. The most important conclusion that can be drawn from the foregoing is to carefully check the settings and, if necessary, change them (at least, the use of alternative DNS addresses will give its result). It goes without saying that if the reason for the denial of access is purely the technical side of the issue, you will have to contact the support service of the provider directly. But it is worth considering the use of VPN clients, which themselves are able to make a secure connection and fix a huge number of problems that were observed with a normal connection (meaning geolocation).
In general, the presented solutions allowget rid of many bugs, unless they are not related to the provider or the functionality of the resource itself. Finally, note also at that time that if your provider does not have a DHCPv6 server at its disposal, the same version of the IP protocol should be disabled, otherwise conflicts with the fourth version may occur.
