Touch-pad (touchpad, touchpad) in laptops sometimeshas the ability to turn off. This may be due to the fact that it is simply deactivated, disabled in the system or out of order. We will not consider the last case, we will look at the solution of problems by public methods.
The touchpad on laptops is a touch panel that is responsible for controlling the cursor on the screen or sending commands to a computer system.
Control is carried out by slidingfinger on the panel, pressing the touchpad space with one or more fingers, and also activating two or more buttons located below or above. Below are several ways to solve the problem of how to enable the touchpad on a laptop (Windows 10 on board) using various tools.
If for some reason the touchpad has disconnected, it may be due to a system failure or a short-term failure.
In its simplest form, you can simply try.reboot the laptop. Since the touchpad does not work, you have to use the Win button, which calls up the Start menu, and then use the up arrow to reach the shutdown line, press the enter key, select the reboot using the up arrow, and confirm the selected action again with the Enter key.
It is important to remember that forced shutdownLong pressing of the power button is not recommended, as this may cause system errors, and at the reboot stage you will have to restore the system.
Laptops are complex and quitespecific devices. However, almost all models have several combinations that are responsible for enabling and disabling some devices and basic functions (sound, Wi-Fi, screen brightness, etc.).
Now - solving the problem of how to enabletouchpad on a laptop. Windows 10 as an operating system in this case is unimportant. All the same, it has nothing to do with turning on the touch panel, so to speak, mechanically. This option uses the simultaneous pressing of the Fn key and one of the function buttons F1-F12 located in the uppermost row of the keyboard.
Depending on the manufacturer of the equipment, F4, F5, F7 and F9 can be used as the power key together with the Fn button, and less often F1.
Among all such devices, it is worth mentioning HP notebooks separately. In them, the manufacturer has not provided a way to enable or disable the touchpad above.
To solve the problem, how to enable the touchpad onlaptop (Windows 10 - operating system, manufacturer Hewlett Packard) in this way, you need to look at the keyboard. It must be separately rendered relevant button.
In some models, it may be absent, and a solution to the problem of how to enable the touchpad on a laptop (Windows 10) is to double or long press in the upper left corner of the panel.
In some cases, there may be a situation when the device is in a disabled state in the BIOS settings.
To correct the situation, when you turn on the laptopA specific key combination is used to enter the settings of the primary I / O system, where in the Advanced section you should find the Internal Pointing Device. To enable it, set the parameter Enabled, then save the changes (F10). Then the laptop will restart and the touchpad will work.
Now let's see how to turn on the touch panel.directly by means of Windows 10. First enter the standard “Control Panel” by selecting it from the right-click menu on the “Start” button. You can also use the control command in the Run menu (Win + R).
Next, you need to set the view asdisplay small icons and then select a section of the mouse. In the properties window, the Click Pad special tab is then used, where a check mark is removed from the shutdown line of the internal pointing device when an external (USB) device is connected. After that, the power button is pressed. If such actions for some reason did not give the desired result, you should click the button to restore the default values. In the panel that opens, the recovery of all parameters is selected, and then the system restarts.
Sometimes the problem is turning off orInoperability may be due to the presence of outdated drivers or the lack of them as such. It is logical to assume that they need to be installed or updated. Since laptops have such drivers installed initially, you will have to upgrade. Let's see how to set up the touchpad on a laptop (Windows 10) by this method.
This is done in the "Device Manager", which can be accessed from the same "Control Panel". But the easiest way to reach it is to enter the command Run in the devmgmt.msc command.
Here we find the right device (as a rule, ithas a name like Synaptics PS / 2 Port TouchPad). Right-click to open the additional menu and select the driver update line. In the new window we use automatic search and installation. If updated components are found, the system will issue a notification. But the touchpad itself could be turned off, so it’s worth checking its status.
Sometimes in a proprietary Windows databasesuitable drivers may not be found. The system will simply write that at the moment the latest driver versions are installed for the device. You can update them manually by visiting the website of the laptop manufacturer, where you can find your model and download the appropriate driver.
But why do this if the update can beproduce in automatic mode? The best solution would be to install software like Driver Booster. Such utilities are able to independently access the resources of equipment manufacturers on the Internet, to search and install the appropriate drivers without user intervention. The advantage of such applications is that they work exclusively directly with the sites of equipment manufacturers and software developers for its components and find the latest updates absolutely for all drivers identified in the system during the scanning process.
Finally, if none of the above solutionshad no effect, perhaps, violations in the touchpad are associated with the effects of some specific virus (these also occur). If, however, the scan did not identify any threats, it seems that the touch panel has physical damage, and then it cannot be dispensed with without repair or replacement.
In general, the question of enabling or disablingThe touchpad should not cause any special difficulties. Using shortcut keys is the easiest. As for the settings made in the system, the default shutdown of the touch panel when using an external mouse is not installed. It turns out that someone included them intentionally or accidentally. Maybe some kind of software failure has affected the change of these parameters. This is especially common when the user is an administrator to himself and installs specific software that requires access to change system configuration settings.
