If you are faced with a situation where it is necessaryconnect two computers to the World Wide Web, while having only one cable from the provider, then you need some specific solution. Some simply alternately connect through this cable, then one PC to the network, then another, but this solution is difficult to call a convenient way out of the situation. The question arises as to how to connect two computers to the Internet, providing simultaneous access to the network from both devices? So, let's figure it out.
How to connect two computers to the Internet
To begin with, it should be said that the solution of this issue requires the availability of a certain tool. You will need a switch - a network hub.
Now you have to choose the machineThe tasks will be to distribute the Internet channel among the other participants of the network. This computer must have at least two network ports, where you can connect the cable. If we are talking about a small office or home network, then for this purpose it is best to choose one that can be called the most powerful in performance. It should be most of the time when it's on. This condition is mandatory, because when you turn off the computer serving as a server, you deprive all other machines in the home network of the Internet. It is worth recalling that we are considering cable Internet, so further you need to do the following. A single network card should be connected to the provider's cable, and the other must be connected to the hub. To the latter then it will be necessary to connect all other machines using the lengths of the network cable of the required length.
If you consider how to connecttwo computers to the Internet further, it should be said that now you will carry out the tuning procedure. The first PC configures the connection. This is done as follows: you must enter the "Connection Properties", select the "Access" item, and then set the permission to use this connection to all computers located in the local network. Well, now you need to change the settings. In the field "IP-address" you need to install 192.168.0.1. Using this particular address will save you from many problems associated with accessing the network from other machines.
To install the Internet on all otherscomputers of the home group, it will be necessary to perform a number of manipulations from each individual PC. You will need to open the local network settings. Certain fields must be filled with very specific numbers.
- IP-address: 192.168.0.M, here M can be any number in the interval 2 - 250;
- Subnet mask should be standard;
- the default gateway is set: the IP address of the first machine serving as the server.
How to connect two computers to the Internet via a router
This type of connection requires a specialdevice, which is called a router or a router. The most optimal option, providing convenience and mobility, is the presence of a Wi-Fi-module in a computer or laptop. In this case, there will not be any problems with adding another device to the network. First you configure the router. This process can be slightly different for different models, as each of them has its own interface and firmware. Usually, the device is connected to the computer, and then the manipulation via the web interface, where the address is replaced by a network address, different for different models. It is important to remember the network security settings, which will not allow your neighbor to use the wireless Internet that you installed for yourself. Any router is usually supplied with an instruction in which everything is described in detail.
Of course, there are other subtleties and nuances of setting up the network for two or more computers, but all of them require separate consideration.
