Together with the technological development of televisionequipment is improved and auxiliary accessories that facilitate the operation of equipment. A considerable role in the additional provision is played by fixators in the form of brackets. With their help, the user can not simply fix the monitor on any surface of the room, but at the same time provide the most favorable viewing angle. There are several basic designs of this type, but the classic desktop monitor bracket is considered the most popular.
For viewers who are used to usingstandard tripods, which are part of the overall design of the TV, there are certainly questions about the advisability of using an additional means of fixation. But here it is important to understand that special brackets are more functional in terms of fasteners. In addition, such systems are not aimed at large-sized models or standard form factor, but on modern liquid-crystal and OLED-TVs. In other words, the bracket for the desktop monitor is designed for accurate fixation of a thin panel with a small mass. However, the possibility of combining with different sizes of TVs depends on the specific model of the lock. Another important thing is that the bracket saves space, unlike a standard stand, and allows you to orient the monitor in any position.
The buyer is offered a choice of two basicconstructions - wall and desktop. Also, both options can be stationary or rotary. That is, in addition to reliable installation at one point, the mount allows you to implement and tilt with the turns of the panel. As for differences from wall designs, the bracket for the desktop monitor has more possibilities for installation. The traditional arrangement of equipment with a lower support point and in this case is considered the most reliable.
Но есть и недостатки у такого способа фиксации.The fact is that the wall fastener in most cases occupies a free space, which would be empty anyway. In turn, the desktop bracket for the monitor still takes away a small area on the reference surface. Otherwise, such locks have all the advantages of modern fasteners.
Having defined the type of construction, you canto start reviewing the main technical and operational indicators. Despite the external complexity of the device, it has few significant parameters. Of course, in the first place, you should compare the mass of the monitor with the load that the bracket can support. The standard is the range of 10 to 15 kg. Next, the angles of inclination over which the table-top monitor bracket can be adjusted during operation are determined. For example, the downward slope can be 30 ° - as a rule, the angle adjustment at the top allows similar values. Diagonal indices are also important. In the standard fit models for 26-30 inches. Even if the bracket corresponds to a monitor with a larger diagonal by weight, experimenting with such a device is not recommended, since in this case the calculation is carried out in terms of the coverage area of the mount, and not the weight load.
Strangely enough, this option has certainadvantages in terms of reliability, as two products held on weight provide optimal balancing. The installation is a rack with two brackets that extend in different directions, on which, in fact, the panels are fastened. There is another principle of arrangement, in which monitors are fixed not in different sides on one level, but diverge with each other vertically. That is, the bracket for 2 desktop monitors can have one panel above the other, which also provides a certain balance. As in the case of single locks, it is important to correctly calculate the load and the possibilities for adjusting the corners of the structure. Of course, in the case of a dual-monitor system, one can speak of a significant increase in the initial strength and stability potential.
In the market for these products,it's easy, because manufacturers clearly segment the models. The most qualitative and modern solutions are represented by the brands "Kronex", "Kron", "Logan" and "Tuarex". I must say that the brackets of these brands are not cheap, but their quality is quite consistent with the high level of advanced monitors from Samsung, Sony, Philips, etc. For example, the bracket for desktop monitors "Kronex" offers a whole line of such structures called "Office". These are stylish, high-strength and compact devices that are equipped with functional hinges and the ability to combine with other accessories.
Among users of such brackets there areand ordinary fans of modern TV panels, and organizers of conferences, seminars and master classes that use such devices for professional purposes. In general, both categories of consumers are very positive about such brackets, noting their versatility, flexibility in installation, original design and, of course, reliability. If we talk about the disadvantages that the desktop monitor bracket sins, there are not many of them, and the main disadvantage is the price tag. The simplest model is estimated at 1,5-2 thousand rubles. Modifications with rotary mechanisms, made of high-quality materials, are available on the market for no less than 5 thousand rubles. And this is only a single installation, and in the case of dual-monitor brackets, the figures increase almost at times.
Visual inspection of such a bracket in assembled withthe monitor brings to the fore not so much the thought of the direct function of the device as a holder, but rather an impression of design merit. In this regard, the desktop monitor bracket is particularly attractive, since its design opens in full. Producers tend to focus on different classes of users, so in the product line you can find devices in a simple and relaxed design, and bright settings for home use. But of course, external beauty is by no means the first quality for which such brackets are valued. They were widely used primarily due to the practicality, convenience and reliability of the design.
