Rostelecom: PLC adapter (connection, settings)

PLC adapter from Rostelecomwhose help the Internet signal is transmitted via the electric network. Such equipment is analogous to the classical laying of an Internet cable in an apartment or a private house.

Today, the wireless network is practicallyevery house or apartment. The so-called Powerline adapters use electrical wiring as a network for data transmission. Despite the fact that this technology is considered obsolete and useless, it has considerable efficiency.

To date, 802.11n technology is one of the most common. The latest router models provide a connection speed of up to 1300 Mbps.

Feedback on the PLC adapter from Rostelecom andWireless Powerline technology confirms the reliability and ease of data transfer that other technologies can not provide. Such systems, in fact, are not a full-fledged replacement for Wi-Fi and complement each other.

What is a Powerline network?

Powerline, in fact, is aa kind of wired network. It can be assumed that the apartment has a broadband Powerline adapter located in the corridor and a smart TV in the living room that does not support wireless communication. To connect digital television in this situation, you can only use an Ethernet cable, which must be put on the floor of the living room from the corridor. Of course, all wiring can be removed under the baseboard, however such manipulations may require certain repairs, which is not always a good idea. In such a situation, the Powerline network can help.

Connecting a PLC adapter from "Rostelecom"

Connect such an adapter is not so difficult: it is invisible and is equipped with the necessary parts for connection. The kit includes two adapters and several short Ethernet cables.

Scheme of connection of the PLC adapter from "Rostelecom"simple: one of the Ethernet wires connects to the first adapter, the second - to the router. Then the adapter is connected to the mains. A second Ethernet cable is connected to the HDTV connector, which also connects the second adapter, which is also plugged into the outlet.

Connection speed

The first standard was introduced in 2001 and had a small speed of 14 Mbps. The latest models of PLC adapters from "Rostelecom" support gigabit networks, which is highly appreciated by users.

Why use Powerline networks?

Powerline adapters are not always advisablebuy for home networks, especially if there is a wireless hub. However, this technology has its advantages - high constant speed, connection security, reliability and simple operation.

The PLC-adapter from "Rostelecom" allowsconnect to networks with poor connection quality caused by interference in the signal path or a large number of overlaps. This technology is often used to connect equipment that does not support a Wi-Fi network, for example, game consoles of obsolete models. Powerline adapters are an efficient, neat and compact network solution.

Powerline technology is safer than its analogue - wireless networks. Access to the connection is available only for one person, because the data transfer is carried out by copper wires in the building.

The functionality of some models of PLC adapters allows you to set a password for connecting to the network.

How Powerline Networks Work

For the first time, the technology of signal transmission byelectric wiring was used in 1920. Such a solution allows electricity meters to switch to off-peak speed. Electric networks in homes support different frequencies, but the standard is 50/60 Hz. The transmission of additional data can be carried out by the same wiring at higher frequencies without creating interference.

The very first Powerline standard providedthe data transfer speed is 14 Mbit / s. A few years later, a new version of the adapters was released, which had a throughput of up to 200 Mbps, which is sufficient for streaming video.

You can find out where the PLC adapter from Rostelecom is sold at the company's offices or by hotline phones.

Connecting and Configuring the Adapter

If you did not buy the adapteroperator "Rostelecom", then before connecting it and then setting up it is necessary to make sure that the equipment supports the electrical networks of your type. With the help of an adapter, you can seamlessly connect to the Internet to those users who can not run Ethernet cables at home.

1. The adapter is connected via a networkpatch cord to a personal computer. In the browser's search bar, enter the address http://192.168.1.1. After logging on, the connection setup wizard starts.
2. By default, the admin password is set on the device, which you will be prompted to change in the first step of the configuration.
3. The new password is entered twice, then the "Next" key is pressed. The second stage is setting up a Wi-Fi connection.
4. The name of the wireless network is entered in the correspondinggraph. The region "Russia" is established and the mixed mode of operation is Mixed 802.11 B / G / N /. The radio channel is left unchanged. The next window is the network security settings.
5. In the security settings of the Wi-Fi network, the type of encryption and the network security mode on AES and WPA2-PSK, respectively, change. The wireless security key is entered in the appropriate box.
6. Adapter configuration is completed by pressing the Compete key or "Done".

The next step in the setup is the LAN Setup section. It changes the IP address. This is done so that there is no conflict with the IP address of the router.

Combining all Powerline adapters into a singlethe network is the last. For this purpose, the device is connected to the electrical network and the router port. The Security key is held down for 15 seconds, during which the device generates a new NMK key. Then the button is pressed repeatedly squeezed for 3-4 seconds.

The second adapter is connected to the electrical network.It also squeezes the Security button for 15 seconds to reset the NMK key and generate a new one, then press it again for 3-4 seconds. Adapters are then automatically connected to each other and the user only has to check their operability.