For fans of night work on a PC: how to make a glowing keyboard and not only!

The question is how to make a glowing keyboard,occurs when the user works a lot in the dark without lighting. Highlighting the input device solves this problem. There are two ways to do this. The first of these is to initially buy such a device. Reliable and easy choice, but you have to overpay for it in any case. Exclusive performance requires additional payment. The second option is to add a backlight to the old keyboard at home. A cheaper solution, but requires good preparation and small financial injections.

Neon

This is the most difficult way to doglowing keyboard. For its implementation, a neon length of 3 meters and a supply voltage of 9V, glue for fixation and a voltage source of 9V are required. A battery, rechargeable battery or power supply will do. Next, disassemble the peripheral device. In those places where the neon will pass, we turn down the lower fixing elements. Then we lay it, at the same time fixing it every 5 centimeters with the help of glue. To supply power, we make a hole with a drill and wind up wires through it. Check the quality of the keys. If there is a need, then correct, and then collect everything. Now, to illuminate the keyboard will be enough to apply power to the neon.

LEDs

This method is similar to the previously described only withthe difference is that here the light source is outside the peripheral device. If you have a computer desk and the keyboard extends, then you can stretch a strip of LEDs over the exit point. Otherwise, you have to make a homemade stand. And then through it stretch the light source. Now let's look at how to make a glowing keyboard in this case. And everything is very simple - we stretch the LED strip along the base and fix it with glue every 5 centimeters. Next we connect to a voltage source - and everything is ready. To turn on the LEDs, just switch the toggle switch.

Phosphor

This is the easiest way to doglowing keyboard. To implement it, it is enough to purchase a paint based on phosphor and transparent stickers for the keyboard. Next, gently cover the keyboard with paint and give it the opportunity to dry. Then glue the stickers and you're done.

Turnkey solution

Many computer manufacturerstry to make exclusive devices. One of them is the company SVEN. Its products combine high quality and democratic value. The leading position of this brand is in the segment of peripheral devices. One of them is the SVEN keyboard of the Comfort 7200 EL model. It is connected via a standard USB interface. All keys are transparent and backlit. The ideal solution for those who work at night.

Your choice

Glowing keypad allows the user withoutspecial problems to work in the dark. Which of the options to choose - a personal matter. The first three options require some training. But the device, upgraded in this way, and more pleasant, and increases self-esteem. Well, ready-made solutions are more expensive, but in this case there is no point in puzzling over how to make lighting for this class of peripheral yourself.