The water aerator is a small device, represented as a mesh filter.
This construction must be fixed tospout mixer, it is designed to mix the flow of water with air masses. This approach allows you to limit the intensity of the flow, while for the user it will remain invisible. Many home masters make the dismantling of the described device, believing that this device is an analog of a coarse filter. Even if a good water filter is installed in the house, you should not abandon the use of an aerator that can limit the passage of water. It is worth considering that, in addition to saving, using an aerator, you can achieve the purification of water from salt and sand particles.
If you decide to purchase a water aerator, then,first of all, you need to familiarize yourself with the main purpose of this design and its device. On the perimeter of the device are small holes, through which air enters into the mix for mixing with water. As a result of this, water emerges from the central part of the device, which is saturated with air bubbles. The main purpose of the aerator is the normalization of the flow.
In order to understand whether it works correctlyaerator for water, you should pay attention to the jet, which should have a milky shade, differ softness and foaming. After the jet hits the object, there is not a huge amount of splashes that could scatter in different directions. The object is under the flow. According to the hostess, it is very convenient for washing kitchen utensils and dishes. Simultaneously, the flow of water is sufficient to rid the surface of objects from washing-up liquids. The aerator for water saturates the flow with oxygen, this promotes the weathering of chlorine compounds. With the help of this device it is possible to improve the quality of water. Aeration helps to increase the volume of the jet at the expense of air, due to the mixing of bubbles, but the pressure is unchanged, while the water flow is significantly reduced. Thus, without an aerator the flow from the tap can reach 15 liters per minute, the nozzle allows to reduce it by 2 times.
Mixer aerator for water saving todayis very popular with consumers. If we consider its additional advantages, we can distinguish a lower noise level when using a water tap, since water mixed with air is not noisy. In the store, such a device can be purchased for an affordable price, which can vary from 2 to 10 dollars. Each user can perform not only installation, but also the dismantling of the device, this also concerns the maintenance, which is simple. The main advantage is the possibility of saving water, which is important for modern owners of meters.
The nozzle-aerator of water has one drawback,which is expressed in the fragility of the device. Thus, after purchase, the device requires replacement once a year, if the water pipe system is based on old pipes, then the purchase of a new device will have to be done once in six months. It is important to remember that the aerator not only creates a highly effective jet, but also helps to reduce the flow, improving the quality of water. This indicates that the consumer will be interested in not having to remove the device, but to monitor the proper operation of the device. Thus, maintenance will involve periodic cleaning and replacement of the filter.
If you decide to install a water economizer -aerator, then you should first familiarize yourself with its device. The design includes a housing, a silicone or rubber gasket, as well as a module with a filter system, which is made of plastic. The meshes with cells are stacked one on top of the other in a cylindrical module. The first and second grids are designed to direct the water jet, cleaning, as for the others, they are necessary to mix air into the water.
Before you buy a water aerator on the tap,it is recommended that you familiarize yourself with the material that can form the basis of the design. If it is a question of metal, then you can count on the most inexpensive devices. For this reason they are the most popular. In the role of shortage is the rapid destruction of the product from the effects of impurities and water. Among other things, the device will be corroded during operation, and you may encounter rusting, which sometimes even results in holes. The basis of the device can lie polymer material, in the role of its advantages can be distinguished excellent quality and affordable cost. The material is beautifully undergone by the destructive effects of water. On sale you can find products of different designs, which can be tunnel and the simplest, represented in the form of dissecting. The aerator on the tap for saving water can be made of non-ferrous metals such as bronze or brass, as well as ceramics. Such devices are the most expensive, however you can count on high quality and long service life.
After visiting the store, you can see the aerators ina large assortment, modern differ very original design features and have unique functions. If we are talking about vacuum devices, then they work on the principle of water compression with the help of a vacuum valve. At the same time, high pressure is applied to the flow, and this is the way to ensure aeration. In the end, the user gets a powerful jet at the output, as well as a small water flow, which can be only 1, 1 liter per minute. Quite often, in recent years, modern consumers have installed water aerators for mixers, they can be swivel or adjustable. With the help of such a device, you will be able to change the strength of the flow, using one of the two modes, namely spray or jet.
If you want to diversify the interior of the kitchen, thenYou can choose an aerator with a backlight, which will color the flow depending on the temperature in different shades. Thus, if the temperature does not reach 29 degrees, the color of the water will be green, if the temperature rises to 30-38 degrees, the water will be painted blue. The flow will be red if the temperature rises above 39 degrees. It is important to take into account that such backlit devices do not presuppose the necessity of using electric power sources, since they work due to the rotation of their turbine. Connect the device to the tap, setting it as a normal economizer, but you do not need to use additional tools, you have to screw it in manually. It is possible not only to illuminate the flow, but also to maintain a certain temperature. For this, a mixer with a thermostat is used.
Aerators for water, the reviews arethe most positive, will perform its functions qualitatively, if it is technically sound. Under the influence of water, the nets are covered with elements of salts, iron oxide and other particles. Ultimately, this leads to the fact that the device ceases to function properly. If this happens, you will see that the water pressure will be weak, the hissing sound of the flow will disappear.
To clean the aerator, you need to dismantle it,using the locksmith or pliers. On the head of the device there are two faces, which are opposite. The aerator needs to be seized with a key behind the edges, turning clockwise. Sometimes it is possible to remove the aerator manually, but if you have not made the treatment for a long time, it can be difficult. Rubber gasket must be removed and assessed its condition. Seized filters must be cleaned with a needle or a thin silk. If parts and holes form indelible deposits, then a chemical cleaning method can be used. He is in many cases the only true.
