We have to make repairs from time to time.And not necessarily in his apartment. Make it qualitatively help putty "Vetonit". With it, you can level the walls or painted surfaces, and then carry out painting work or glue wallpaper. Let's plunge into the world of putty and consider several of its types:
Vetonite LR +
A dry mixture (25 kg) is diluted in 9 liters of water andmix the drill with the nozzle for a few minutes. In the water, you can add a primer in the proportion of 1:10. Then the mass is left to stand for 20 minutes for better dissolution. Putty "Vetonit" is ready for use after repeated mixing. The solution can be stored for no more than a day. He can not be poured into the sewer, since he can hammer the pipes.
Application of the mixture is done with a two-handed spatula.Another method of spraying is used. For partial alignment use a small spatula. Surplus is removed and reapplied. After the spraying, the ceiling does not require further processing. When aligning in several layers, it is necessary to apply a new layer after one day. After the surface is completely dry, it is ground with special paper. After finishing the work, you need to flush with water tools and equipment.
Vetonit TT
This putty "Vetonit" on a cement basis.It is not afraid of water and is used for leveling brick, concrete, expanded clay and plastered surfaces in premises of any type. It is not applied to painted, plastered with lime solutions, walled with water-soluble putty.
At 6 liters of water you need 25 kg of the mixture.Mix two minutes with a powerful drill. 15 minutes the mass must be settled. The solution is then re-mixed and used for three hours. Hardened surface can be painted. To do this, alkali-resistant paints are used.
Putty finishing "Vetonit" is based on whitecement and limestone. Used for leveling concrete, claydite-concrete, brick, plastered surfaces. It is suitable for both interior work and for finishing facades. After its application, the walls are wallpapered, painted or tiled.
"Vetonit" - putty is applied in a thin layer in 1-2mm. Its consumption is 1.2 kg per square meter of surface. The composition of the mixture is absolutely safe for humans. Before work, the walls and ceiling are cleaned of dirt, lime, grease, dust, paints and glue. If they are too dry, the putty "Vetonit" is applied to the surface treated with a primer.
For 10 kg of the mixture you need 3.5 liters of water.Mixing is carried out with an electric drill, then settle for 5-10 minutes. After repeated mixing, the solution is ready. The time of using the mass is 3 hours. After work on the surface for three days should not get direct sunlight.
We examined only a few types of putty "Vetonit". In fact, there are many more. All of them are 100% quality, easy to apply and excellent results!
