How to make an arch of drywall yourself: a professional solution

Today with constantly updated materials, you can create truly amazing things in the design of apartments. The most popular were the arched

Alternatively, you can perform the arch usingplaster, using the template, but this is not very practical. It is much easier to make an arch from gypsum board, not using templates, but simply following some recommendations.

Preparation of aperture and technological process of creating an arch

Everything begins with preparatory work.As a rule, the arch in most cases is installed instead of the door unit. The working area and the opening are carefully cleaned from dust and other debris. For those who do not yet know how to make an arch: from the plasterboard, parts are made by the hands that will be fastened from the sides of the opening. It is necessary to do the following:

1. Perform markup on drywall sheets,which correspond to the width of the sides of the opening. To make a circle for an arch or, in other words, an arc, it is necessary to prepare a pencil, an awl and a string.
2. Then, focusing on the radius of the future arch,make two loops at the right distance. Shilo and pencil are threaded into the eyelets, then the awl is stuck in a sheet of plasterboard, and a pencil is drawn with an arc, and the string must be stretched.
3. The second part of the arc is drawn along the ready-made template of the first part. Next, the frame is made for the arch.

Gradually the topic of interest to us, how to make an arch of plasterboard with our own hands, is already becoming

Execution of the arch framework

The frame plays practically the main role here, soas it actually is the base on which the elements of plasterboard are fastened. The frame is made of a profile on a metal base. In order for the sheet to bend, it cuts the side pieces. For a more accurate fit as a template, you can use the prepared sidewall for the arch.

After the frame is made, you canstrengthen in the doorway, and then screw the finished sidewalls to the frame. We negate the topic of interest to us, how to make an arch of plasterboard with our own hands, and finish the lower part of the curved surface.

There are several options with which you can bend drywall, without breaking the sheets. So:

1. In the first case, use the dry method, when the bend does not exceed the radius curvature of 30 cm.To do this, small incisions are done on the sheet, which should not damage the bottom layer of paper. You need to go a few millimeters into the sheet. Then the sheet is slowly broken, then attached to the frame by screws. All previous notches are shpaklyuyutsya.
2. The second method is to soak the sheet,when moistened, the sheet can bend, and after drying, leave the form into which it was artificially deformed. In this way, you can make an arch for the opening without any problems.

Probably, now we finally dispelleddoubts about how to make an arch of plasterboard. You just need to be guided by small, but effective rules, and you will get the expected result.