How to make a drywall ceiling with your own hands? Not so difficult

If you built or repaired the house, but youceilings failed, then you should not despair. The uneven surface and other flaws can be corrected by yourself, and not hire specialists. This will help you drywall. With it, you can hide any flaws on the main surface. In this article we will talk about how to make ceilings of drywall with your own hands. Installation in this situation does not take a very long period of time. It is also possible to decorate the received ceiling with any materials.

There are many types of plasterboard ceilings.If you decide to find the answer to the question of how to make ceilings from drywall with your own hands, then you should decide on the shape of the future structure. You can choose for yourself any option to your liking, while relying on the recommendations of friends or on articles in magazines or building materials. And you can dream it yourself. Plasterboard ceilings are single-level, multi-level, geometric, stepped and wavy.
The appearance of the plasterboard ceiling may depend on the choice of lamps, a variety of decorative elements, or on wooden beams.

How to make a drywall ceiling with your own hands?Installation is laborious, but not at all difficult. We give an example of the simplest installation of the ceiling of plasterboard. Where to begin? First, you need to think through the design itself in detail: where the lamps will be built in, calculate the height and choose the elements for its decor. You need to identify all the flaws in the ceiling that you need to hide. Before work, prepare the tools you need: a level, a tape measure, a screwdriver, a hole crown, a drill, a plane, a construction knife, sandpaper and a spatula. For work, you will also need a guide and ceiling profile, direct suspension, screws and dowels, crab. Dowels in the process of fastening can be replaced by anchor wedges.

Asked how to make ceilings fromdo-it-yourself drywall, you should create a markup using the guides from the profiles. It will be attached to them material. It should be noted that they should not be placed too far apart. Otherwise, drywall will sag. Sheets are attached with a small gap. It will be pressed into a special mixture, which is used for sealing seams. In the very middle of the sheet and its edges will be the main profiles. Suspensions are fixed with a pitch of 400 mm to metal anchors along these lines. Then the carrier profiles are inserted into the starting frame or into the guides themselves. They are fixed in the room around the perimeter. The frame is inserted so that there is a small distance between it and the wall. The gap is necessary in order to avoid the consequences of deformation of the ceiling. A change is expected from temperature changes. Then guides are inserted into the suspensions.

The final stage of the work is a primer andputtying Even if you decide to make a two-level plasterboard ceilings, the photos of which you can see, this step should definitely be done. Intermediate stage in creating a high quality ceiling is putty. Used for putty roller with a handle, spatulas, a wide brush, sandpaper, Phillips screwdriver, universal primer, finishing putty, serpyanka. After the primer, which is carried out in two stages, it is necessary to proceed to the finishing of the ceiling. In this case, everything will depend on your imagination. You can use wallpaper for cladding, or you can apply some image on the ceiling. The choice is yours.

On this construction of the ceiling can be consideredcomplete. If you don't like the suspended ceilings, you can turn your attention to the suspended ceiling. In the bedroom and other rooms, it will look just amazing.