If you live in an apartment or house within thecities, then for certain quite often you face the problem of switching off hot water. To address this issue, manufacturers of modern appliances offer a variety of equipment, these can be attachments to cranes, as well as storage and flow water heaters.
Water heater "Termex" 100 liters, instructionfor the operation of which will be presented below, is a storage device, its power consumption is 2.5 kW. The equipment is powered by an electrical network with a voltage of 220 V. This unit can be mounted on the wall by connecting it with the help of the lower connection. The dimensions of the device are 382 x 1082 x 400 mm. To ensure that the equipment has served as long as possible and does not require repair during operation, it is necessary to familiarize yourself with the rules recommended by the manufacturer. Of these, you can understand what the features of the unit.
Water heater "Termex" 100 liters, instructionthe operation of which must be studied by the consumer, if he wants to acquire this device, can provide several water intake points at once, this indicates that the device is a pressure head. The fact that the unit is turned on, you can find out by the indication that, according to customers, it is very convenient. It is impossible not to mention the presence of the functional of limiting the temperature of heating, these consumers emphasize when choosing quite often. The device has a protection system in the form of a magnesium anode. According to buyers, you can take advantage of accelerated heating, which saves time. The inner surface of the tank is covered with glass ceramics, this indicates that the equipment will last you a long time.
Water heater "Termex" 100 liters, instructionon the operation of which will allow to properly use the equipment, has an electric heating element, due to which water is prepared. In general, spiral heating elements or heating elements can be used in this type of equipment. When consumers choose such devices, they pay special attention to the convenience of installation and the method of attachment. In the case of the model described in the article, the fixtures are wall-mounted, and the installation itself should be oriented vertically.
During the operation of the water heater, the liquidcan leak from the exhaust pipe of the safety valve. This is necessary for safe operation of the device. The discharge pipe should be left open, it should be directed downwards, and the temperature of the external environment should not fall below 0 ° С. The "Termex" water heater of 100 liters, the instruction manual of which will help you solve a lot of problems, should be freed from some amount of water from time to time, it should be discharged through the exhaust pipe of the safety valve. This is required to remove calcareous sediments. With this method, you can test the performance of the unit assembly.
How to use a water heater "Termex"the operation manual will let you understand. Therefore, when installing and using the water heater, it is inadmissible to connect the power supply if the equipment is not filled with water. The protective cover in this process should not be removed, as far as the case when the power supply is turned on. The water heater should only be used with grounding, and it must be connected to the water mains, the pressure in which is not more than 0.6 MPa. It is absolutely impossible to connect the device to the system without a safety valve, if the power supply is turned on, then draining the water is prohibited.
Boiler "Termex" 100 liters, instruction forthe use of which is partially covered in the article, should only be used with spare parts recommended by the manufacturer. For cooking, use of water from the water heater is strictly prohibited. Through the device should not be missed the water in which there are mechanical impurities by the type of stones, as well as sand. All this can cause a malfunction of the unit and the safety valve. The manufacturer does not recommend to change the design independently, as well as the dimensions of the brackets.
Water heater "Termex" 100 liters, managementon the operation of which allows you to exclude the need for repair, must be connected by specialists, this is especially true for plumbing and electrical work. They should be dealt with by people who have the right to conduct appropriate manipulations. The water heater should be as close to the place of use of hot water, then you will significantly reduce heat loss. The water heater is suspended from the brackets with the help of anchors, the latter are not included in the kit. It is important to avoid spontaneous movement of the hooks on the brackets. The "Thermex" water heater IR100 liters, the dimensions of which were mentioned above, may require maintenance during operation. For this, it is installed in such a way that the distance from the protective cover to the near surface is 0.5 m. In order to exclude property damage in case of malfunctions of the hot water supply system, the water heater is installed in rooms that have waterproofing floors and drainage to the sewage system. Under the device it is prohibited to install items that can be exposed to negative effects of water.
If the water heater is located in an unprotected room, a protective pallet is installed under it, but it is not included in the delivery. The drip tray must be drained to the drain.
