The water heater became verydemanded device, especially in the absence of options for connection to the central water supply system. The device is great for warming up water in domestic conditions for various household needs.
Wall water heater is very simple inconstructive plan. It consists of an internal tank, which is made of steel or plastic. Its volume can be 10-25 liters. If the inner tank is made of plastic, then it is usually protected by a metal casing. By design, the device resembles a thermos, which allows to ensure a long-term preservation of the water temperature at the required level. This was achieved through the use of an air gap that is located between the inner and outer walls. When the device is operating, the outer walls of the container are not exposed to heat.
Water heater wall mountedan integrated thermoregulation system that allows you to adjust the water temperature in the range of 0 - +60 degrees Celsius, which allows you to choose the optimal operating mode. The water is heated with a tan made of stainless materials, and its supply is made by means of a ball valve, to which, if necessary, a hose can be connected. The level of water intake is located above the ten, which eliminates the possibility of overheating, and also guarantees absolute safety in terms of operation. The system of fixtures included in the kit allows you to mount the device on the wall. The equipment operates from the household electrical network. The nominal power of the device is at the level of 1.25 kilowatts, which allows an hour to heat the water to +70 degrees.
The water heater "Moidodyr" is stillone kind of this equipment. In a constructive plan, it is very different from the wall solution. In this case, the product consists of a cabinet with a mortise washer, above which a tank of 15-20 liters is installed. Inside the tank there is a heating element and a thermostatic system. Such a device is provided with protection against dry switching and overheating. The curbstone with the sink can be made of plastic, wood or metal, the tank is made of stainless steel, and the tans are made of copper.
The water heater "Alvin" is perfectly suitable for household needs and hygienic procedures, but does not allow taking a shower. There is a separate type of instrumentation for these purposes.
Water heater "Success" for the showerIt is a device, the distinguishing feature of which is the ability to heat water up to a temperature of 80 degrees. In such a device there is a thermostat that allows to correct the required temperature regime. It is located under a special protective cover. Another of its distinctive features is the variability of the water intake inside the tank. The traditional filling method is possible, also it is possible to use special filling nozzles, which are provided in the construction (a pump can be used for this).
