/ / How to fix a zipper: practical recommendations

How to fix a zipper: practical recommendations

Lightning on clothes that began to diverge, causesdiscomfort and nervous irritation. However, the problem can be eliminated without resorting to the services of the workshops. How to fix the lightning? Let's try to find the answer to this question.

What to do when the slider does not cash in on the zipper?

lightning broke how to fix it
The runner often does not want to sit on the zipper,Because the fabric is unfolded at its base. To eliminate the problem, it is enough to process the material with nail polish. Once the substance has impregnated the fabric, the area in which the slider is inserted will become stiffer. However, this method will restore the functionality of lightning for a short while.

To strengthen the ruffled area, as aAn alternative to nail polish is to use a quick-setting glue. Apply it to the damaged part of the lightning should be small portions. This method makes it possible to use lightning much longer than in the case of varnish.

How to fix the slider?

If the lightning bolt diverge due to damagerunner, the latter must be tightened. To do this, you will need regular pliers. With their help it is necessary to pinch the metal on each side of the slider. Press the product in the middle, in the place where the tongue is fastened, it is not necessary. This can lead to final damage to the slider.

How to fix the zipper in case the aboveactions did not produce the expected result? In this situation, you will have to completely change the slider. To remove it, it is necessary to remove the limiters at the base of the lightning, bending them with an awl. Picking a new slider, it is worth paying attention to the size of the old one. The parameter is indicated on the inside of the tool.

How to fix a zipper if it does not have enough teeth?

lightning diverges
If the teeth with a lightning, made ofplastic, you can restore them by using a thick line. The latter must be wound in the damaged area, beforehand passing through the fabric.

What to do if you need to restoremetal zipper? In this situation, you can repair the product by inserting the missing teeth in place, taken from the old lightning. The main thing is that they fit according to the shape and size. To fix them in place of the formation of a hole, you can tighten it with the help of pliers.

Sometimes the teeth protrude to the side and preventfree movement of the slider. In this situation, it is necessary to place the zipper on a firm, level surface, after which gently tap on its entire surface with a hammer.

How to fix a lightning, if it runs tightly on a slider?

how to fix a zipper
On old, long-used or new thingscan run a tight runner. To eliminate the trouble, enough to lubricate the lightning. If it is a question of leather clothes or shoes, the lubricant can be produced using any fatty substance. However, on clothes made of cloth, stains may appear.

A universal lubricant that does not harma valuable thing, is a pencil extracted from a pencil. In order for the slider to smoothly move, it is necessary several times to hold the lead across the entire length of the zipper. Then, several times, fasten and unfasten the product. This will allow evenly distribute such a peculiar lubricant.

Alternatively, lightning can be rubbed with soap or wax. It is recommended to do this from the inside. Otherwise, the lubricant can give things a not too aesthetic look.

Finally

So we found out what can be done iflightning broke, how to fix the product. To do this, it is sufficient to use the improvised means that will be found in every house. With accurate work performance, you can fully restore the operation of lightning, without resorting to the services of masters.

Liked:
0
Popular Posts
Spiritual development
Food
yup