The company "Polaris" on the Russian market existsmore than 19 years. This firm is engaged primarily in the manufacture of water heaters. However, on the shelves in stores you can also find small household appliances of the indicated brand. Conditioners and climate devices, the company "Polaris" began to produce not so long ago. The first models of water heaters were produced in 2000. The given company for today is capable to brag of really big assortment. Water heaters "Polaris" are produced in Italy, China, and also in Russia. However, the main factory is located in Israel.
Heating elements in all modelsonly tubular type. Due to this, the tank is heated quite quickly. Nominal capacity of water heaters depends on the dimensions of the model. The maximum temperature can also vary. If the tank is of a shut-off type, the system maintains a significant pressure.
When it comes to closed modifications, thereThis indicator is usually at a level of 5 atm. The regime of accelerated water heating is present in almost all models of the early and late series. The coating of the tank may differ, but most often manufacturers use stainless steel. When installing the device problems are rare, the buyer can choose vertical as well as horizontal modifications based on his preferences.
This water heater "Polaris" (50 liters)the maximum power is able to boast at a level of 5 kW. The maximum temperature of 60 degrees, it takes about 52 minutes. The heater in the tank is installed in a standard tubular type. Problems with it are rare, the quality is excellent. Of the disadvantages, it should be noted a small value of the limiting pressure.
If the water pressure is large, thenThe nozzles can be damaged. All this should be taken into account by the buyer when buying this model. From the positive sides it is important to note the acceptable dimensions of the device. In the installation it is quite simple, the fastening elements to the water heater are applied.
Many consumers choose thisThe water heater is on the tap because of its convenient control. Adjust the temperature in it with a small regulator, which is located at the bottom of the device. Direct tuning is carried out abruptly. In the first mode, which is called economical, the heater operates with a power of 3 kW. In turn, the maximum device can reach 5 kW.
The limiting temperature in this case will bemake exactly 70 degrees. The power indicator on the front panel is provided by the manufacturer. The thermometer water heater on the tap has a built-in type with a scale of up to 80 degrees. To protect the tank from overheating, there is a magnesium anode. In some cases, it may break, but such situations arise very rarely among owners. Problems with a safety valve are raised more often. This is due to power surges in the network.
The tank system of these water heaters "Polaris"have a closed type. This model is calculated for heating 50 liters of water. The nominal power of the device is at the level of 6 kW. The maximum temperature is dialed very quickly, and this is good news. Accelerate the heating process will help the user to turbo mode. Pressure system is maintained in the water pipe at a level of 8 atm. On the inside, the tank is completely made of stainless steel.
For convenient management of manufacturerstook care of a simple mechanical regulator. The level of power can be monitored using a system of indicators that are located on the control panel. The safety valve in this model is installed quite high quality. There is only one heating element in the system. The nozzles for installation are included in the standard diameter. The thermal insulation system in the water heater is present.
These water heaters "Polaris" reviews havegood, many owners preferred this model because of high performance. There are two heating elements directly in the tank. Due to this, the heating time of water is significantly reduced. For the thermal insulation of the system, quality polyurethane is used.
Protection against overheating in the tank is established.The flange at the bottom of the structure is removable. Given this, it can always be disconnected and cleaned. To serve these water heaters "Polaris" (80 liters) are able to quite a long time. This is largely due to the presence of the magnesium anode. The outlet pipes in the system, like the tank, are made entirely of stainless steel.
This water heater is designed forvertical installation. The nominal power of the device is at the level of 7 kW. The manufacturer's thermometer is built-in type. The power supply system is a network with a voltage of 220 V. For rapid heating of water in the tank there is an accelerated mode.
The maximum heating temperature, according todocumentation is 70 degrees. Of the features should be noted a reliable system of protection. It makes the device safe for human health, even with large surges in the wiring. Also there is protection against leakage and overheating. The standard kit includes the following: a water heater "Polaris", instructions and fasteners with connecting pipes.
The limiting power of these water heaters"Polaris" have 4 kW, and the rated voltage is 220 V. From the positive sides, we should note the rapid time of heating the water. The feeding system is installed quite qualitatively, there are no problems with the nozzles. Any person can adjust the power regulator. To control the heating there is a thermostat.
You can monitor the operation of the device using the systemindication. The pressure of the water heater in the pipe is able to keep the high. The tank on the inside is covered with an additional layer to protect it from corrosion. Pipe laying in this model is provided by the lower one. This water heater is mounted on the wall, and for fastening all parts are in the standard kit.
Rated power of these water heaters"Polaris" have a level of 4 kW, and the limiting frequency of the device is 45 Hz. The power supply of the system is a network with a voltage of 220 V. The deviation maximum is allowed 10 V. The modes in the water heater can be changed with the regulator, which is located at the bottom of the device.
The dustproof class is available in the "IP24" series.All the internal elements of the system of high humidity are not afraid. All the wiring inside is protected. There are two heating elements in the tank. They are produced in the model entirely from copper with an anti-corrosion coating. A magnesium anode for their protection is also used. Directly the tank is usually made of stainless steel, and the temperature regulator is mounted open type.
Many buyers choose this flowingwater heater "Polaris" for high power. For a large family it fits well, but can also be used in the country. The anticorrosion properties of the model are rather high. Adjust the temperature can be smooth. Also on the display system is the ability to monitor the operation of the device. To save electricity, the running water heater "Polaris" must be switched off for a while. Otherwise, the cost of electricity will be prohibitive, this should be taken into account.
If we consider negative feedback, thensome owners complain about the contamination of the nozzles. Experts believe that this problem is associated with network filters, which are located near the temperature regulator. When they are contaminated, raw water enters the tank on the heating tubular element. In this case, the anti-corrosion layer is not able to protect it for a long time. Solve this problem by simply periodically cleaning the power filter. To do this, remove the cover at the bottom of the water heater and remove the magnesium anode. Only after this, you can check the status of the network filter and then take any decision.
The specified water heater "Polaris"demand in the market is high. Most people prefer it because of the simplicity of the design. It can be installed in almost any apartment, it takes up a bit of space. The control is the simplest, and it is not possible to precisely regulate the power. However, the display system is installed, you can use it. There is one heating element in this modification. Its maximum power is at 4 kW.
Economical mode in the system manufacturerprovided. The voltage of the water heater is maximum withstand 220 V. The deviation is allowed only 10 V. Thus, the high device can not withstand the load. In general, the supply system is quite high-quality, the branch pipes are very rare. The protection unit is conventional with thermal insulation. The thermostat is located at the bottom, like the power controller.
This water heater is electric "Polaris"It boasts the AV 2.0 protection system. If the water supply is somehow broken, then it is impossible to turn on the heating element. The system of autodiagnostics has this water heater. In addition to protection from overheating, the mechanism operates from freezing. The pressure of the tank is able to withstand a colossal force of 16 atmospheres.
The temperature sensor in the device is installed in series"TC2". It differs from other instruments with high accuracy of measurements. Accelerated heating mode is available. Maximum operating temperature of the device is at 75 degrees. The tank is made of stainless steel in this case. In turn, the nozzles are plastic. The safety valve in the system is set to one and the pressure limit holds at 13 bar. The standard kit includes everything needed to install the equipment.
