After buying and connecting the washing machineit happens that the new unit does not please its owner at all, but instead, for some reason, "jumps" all over the bathroom. An inexperienced person in the matter of installing household appliances will not immediately understand what's the matter, and decide that he has acquired a defective household appliance. The specialist will necessarily outline even one, but several reasons for this phenomenon, and, as a rule, the machine itself is not at all to do with it.
As a rule, any problems related toincreased vibration machine, one way or another are a consequence of the fact that the installation of a washing machine was mistaken. And errors can be different. Before buying antivibration stands for a washing machine, you need to exclude them.
Firstly, the reason for the fact that on vibration the vibrationand the noise of the washing machine is such that it shifts from its place, unfolds, or even literally "jumps" on the floor, perhaps in the fact that simply the installers have not removed the transport bolts. Any professional knows that it is necessary to do this. In case the user of the machine installs it himself, this must be indicated in the installation and operation manual. Nevertheless, sometimes this point is still overlooked, and then the machine normally refuses to work: it shakes it so that it can not be ignored. You just need to unscrew the transport bolts - and everything will return to normal.
The second most probable cause of unnecessaryVibrating is that the installation of the washing machine is uneven. Stands under the legs of the washing machine here will not help - in this case, they need more of their regulation or alignment of the actual surface on which the technique is worth. Leg regulation is an elementary operation. The main thing is to understand which direction the device rolls, and to increase the height of this leg with the help of a fixing nut. If the machine is stable and does not stagger, then the legs do not need adjustment, and the matter is in the defects of the floor. Needless to say, in most apartments this is a common problem. Even if the washing machine is installed using a building level, an unevenness or a pothole on the floor can cause the machine to fall into this unevenness during operation, slightly shifting. Then the level of vibration is greatly increased: the "stilalku" starts to shake, the objects standing on it begin to fall, and sometimes it starts to knock against the wall. Leave this so it is impossible, you need to stop the program and return the device to its place.
By the way, the requirements for the surface, whichit is permissible to install such household appliances, are extremely simple and logical: it should not be uneven, must be firm and clean. It is advisable that the base is concrete at the same time - it is not recommended to place the machine on a wooden floor. It may be necessary to use antivibration mounts for the washing machine, but if all recommendations are followed, most likely, problems with unnecessary vibration of the washing machine should not arise. It is also worth mentioning that sometimes a car that served several years without any complaints suddenly starts to shake very violently, with other things being equal. Perhaps in this case the problem is really in the device itself, and the bearing is worn out. There is no way to do without a master, and if the problem really is in this detail, it is necessary to replace it, which is also possible only for a specialist.
I must say that even if the surfacequite even, and the washing machine is quite stable, its users can still feel that vibration and noise during its operation are excessive. For such cases, you need antivibration mounts for the washing machine. It is absolutely normal when certain models of washing machines vibrate somewhat more than others. Internal anti-vibration systems of washing machines rarely fail, just each model of the machine has its own level of vibration, and if it does not suit you, shock-absorbing stands for washing machines will help save the situation. They partially pay off fluctuations in household appliances, reduce noise, do not allow the unit to slide over the ceramic tile in the bathroom and protect it from scratches. And ultimately, the stand for the legs of the washing machine will extend the life of the device, because with a very strong vibration, damage to the washing machine is not excluded.
By the way, the greatest level of vibration differnarrow washing machines. They are compact, and this is their absolute plus, but that's why they are less stable. In addition, in the narrow drums of washing machines, laundry is often stuck in lumps, so unbalance occurs, and on pressing the machine shakes more than usual. And sometimes even in this case, the spinning does not turn on, and you have to stop the program, pull out and straighten the laundry. It is in the case of a narrow model that the stand under the washing machine will be very useful.
Antivibration stands for washing machineare special rubber, silicone or polyurethane pads, which are installed under each foot of the household appliance. The surface of such supports is embossed from above, which allows the legs of the washing machine to stand steadily in them, and from the bottom they are provided with stiffeners for greater efficiency in damping the vibration. The color is usually white or black, there are transparent patterns. Stands in size are universal: they are usually designed for a diameter of the stalk up to 4.5 cm. But their shape can be different: round, square or in the form of "feet." However, their form is especially appreciated by no one, the most important is efficiency.
Produce a stand for washing machines, manyfirms that produce household appliances. It is not at all necessary to select them as a typewriter. Antivibration mounts Topperr are quite suitable, and you can put on them not only washing machines, but also refrigerators. Differing affordability, these stands are made of quality and durable material and have a conical shape. With them, the washing machine will be reliably protected from excessive vibration, and the floor covering - from scratches and dents.
Also, the acoustics for such a household appliancecan be made in the form of not individual pads, but a whole rug. It is made of rubber and provides a particularly robust machine. On the mat there may be additional cushioning cushions in the corners. Such models very well absorb vibration and reduce noise. Rugs are somewhat more expensive than the stand, but in any case, these accessories will not cost much.
Should I use antivibration mounts- depends on the specific case. Be sure before buying and installing such pads, make sure that the increased vibration and frightening noise during the washing machine is not associated with improper installation. If you exclude all errors, but you still would like to see the machine spinning softer and softer - well, then you can purchase these additional devices.
