/ / Yota: Internet setup, automatic and manual

Yota: Internet setup, automatic and manual

Very young, but already managed to conquer the heartmany users, the mobile operator Yota continues its march around the country and is recruiting more and more users who are tired of paying fabulous sums to the “big three”. Yota offers a completely unlimited access to the network, a package of minutes and endless SMS for more than a reasonable price (from 300 rubles).

The operator has small errors.Despite the use of modern technologies and capabilities, SIM cards do not always want to be activated properly. This is one of those things that you have to put up with when connecting to Yota. Setting up the Internet at the same time does not take much time, even in manual mode.

Yota internet setup

Preparing for connection

Initially, even before the acquisition of a SIM card, you should make sure of a number of facts:

  1. Your device supports networks: from second (2G) to fourth generation (LTE).
  2. Your location is on the coverage map, and Yota supports work in your area.

If there are no problems with these items, then you canproceed to the activation itself. To do this, you just need to install a SIM card in a mobile phone or tablet and disable the connection to Wi-Fi (yes, activation occurs over the mobile network). To manage your account, payment and so on, you should download the official Yota application (Internet settings in the phone should be made strictly if available), it will help with activation and setting of the tariff.

If after the operation, the network does not appear, then you should restart the device. Even if it did not help, you must enter the settings manually.

Also: a SIM card can be purchased at any place, but it should be activated only where you plan to use it.

Internet settings Yota on iOS

By manual network configuration is meantentering APN data into the phone settings. This procedure is necessary in cases where the phone can not get this data on their own. So, in the case of iOS, you need to:

  1. Go to “Settings> Cellular> Data Settings> Cellular Data Network”.
  2. Here in the item “Cellular Data” we enter APN - internet.yota (we leave the other fields empty, this is important).
  3. To set up MMS, go down a little lower and specify the following in the appropriate item:
    1. APN - mms.yota;
    2. MMSC - http: // mmsc: 8002;
    3. MMS - proxy - 10.10.10.10:8080 (leave the other fields empty).

Internet settings yota

Most often, such fine-tuning is required on tablets, while phones, in turn, cope automatically, but in which case these settings are suitable for the iPhone.

Setting up the Internet Yota on “Android”

There is no fundamental difference in the settings for these two platforms, in most cases it is also enough to download the Yota application and turn off Wi-Fi, if manual configuration is needed, then proceed further:

  1. Переходим в “Настройки > Еще > Мобильная сеть > Access points> Change / create access point ”(the names of items may vary from time to time, it all depends on the version of the operating system, and sometimes on the shell used).
  2. To configure the APN, you must specify two parameters: APN - internet.yota and APN Type - default, supl.
  3. To set up MMS, specify the following data:
    • APN - mms.yota;
    • MMSC - http: // mmsc: 8002;
    • MMS - proxy - 10.10.10.10;
    • MMS port - 8080;
    • APN Type - mms.

After entering the data, restart the device. If everything is done correctly, then the SIM card should be activated, and the Internet go into working condition.

Yota Internet settings in the phone

Modem setting from Yota

In addition to SIM cards, the company Yota is also engagedselling all sorts of routers and modems. They allow you to go online using a laptop or computer (single user device). Routers can create an improvised Wi-Fi-structure based on Yota 4G networks. This network is available to everyone who knows the password from it (multiplayer version).

In most cases should be enoughautomatic setup and activation Yota. Setting up the Internet on a peripheral device is the same as in the case of a SIM card: as soon as you connect the modem to a computer or laptop, it automatically enters all the data and sends you to the official website. On the site you will be asked to fill out a profile, as well as enter a confirmation code (it will come in the SMS, to the number that was specified during registration).

Setting up internet yota on android

Configure the access point

It is not exactly known why, but Yota, likeSome other operators, blocking one of the most important functions of smartphones, namely the ability to share the Internet. It can be assumed that this function is hidden due to low tariffs (the user can refuse to buy a modem or router in favor of distributing the Internet from the phone). Fortunately, users do not have to put up with such a controversial policy. How to fix this unpleasant feature Yota? Setting up the Internet and APN to help us, consider the example of iOS:

  1. To start, go to “Settings> Cellular> Data Settings> Cellular Data Network”.
  2. We are looking at the bottom of the item “Modem Mode”. Enter the following parameters:
    • APN - internet.
    • Username - gdata.
    • Password - gdata.
    • After that, it is worth waiting a bit or rebooting the device.

На данный момент этот метод остается самым easy to use and does not require the purchase of additional devices from Yota. Setting up the Internet and APN manually will cost less and save you from having to carry another gadget with you.

conclusions

As you can see, the Internet settings Yota will not takea lot of time, and even a beginner in computers and smartphones will easily cope with them. Moreover, even serious problems like the lack of modem mode can be solved with a couple of taps within two minutes. After that, you can fully enjoy the truly unlimited Internet.

Liked:
0
Popular Posts
Spiritual development
Food
yup