What is the principle of operation of split systems

Usually wall split systems we are used tocall air conditioning. This type of devices has become most widespread in apartments and small offices. Mounting them is fairly easy, and it is very convenient to use in everyday life. In the process of choosing such a device, it is necessary to pay attention to its power: it should suffice to heat or cool the air, but there should not be too much to prevent the air conditioner from wearing out too quickly. The equipment of wall air conditioners includes a number of functions that are included in the base volume of each manufacturer. Among them we can distinguish, for example, the mode of air ventilation, a timer, remote control, and many other possibilities. The principle of operation of split systems is usually the same, but there are nuances associated with it. There are wall-mounted inverter versions equipped with an inverter compressor. This type in comparison with others consumes much less energy, about 30%. It continues to operate at reduced power even when the required room temperature is reached. This type of instrument is much less prone to wear.

The principle of operation of split systems implies thatThe main mass of devices is equipped with the function I SEE. This ensures that a certain temperature is maintained by scanning the specified area with an infrared counter. After that, the signal is transmitted to the control system, which directs the air stream to the desired side, turning the blinds. The principle of operation of split systems of modern production allows to distribute air throughout the room evenly, since the flow is released at an angle of 150 degrees.

Basic design of wall-mounted air conditionersassumes the use of the principle of fuzzy logic, which implies automatic temperature adjustment. It turns out that he himself is able to determine the environmental conditions in order to "adjust" for them. The consumer has the ability to adjust the temperature using the remote control.

Considering the principle of the air conditionersplit-system, we can say about what kinds of these devices exist. This will help to understand what their differences are. The most common wall variants exist in the widest range of power. The column split system is a device intended for cooling large areas.

It is fixed to the floor, and is made in the form of a columndiameter 50 cm. Floor-ceiling solutions allow you to place them as you like, harmoniously fitting into the interior design. The cassette type of split systems is attached to the false ceiling. Usually they are used in supermarkets or shops. As it was said earlier, the principle of operation of split-systems is similar, but differs from the functioning of conventional air-conditioners.

This type of device fits perfectly into anytype of interior thanks to increased popularity, especially in recent years. And if you take into account the principle of the split system, it becomes clear that this is the optimal solution for providing comfortable conditions in the home.