Climatic equipment in recent yearshas significantly advanced technologically. Modern air conditioning units feature functionality, high performance and convenient controls. True, within the segment there is a fierce competition between different designs. Among consumers, the most relevant question is, how does the air conditioner differ from the split system? The difference lies in the technical device, which at the same time determines the operational capabilities of the systems.
Classic air conditioning is aOne-piece construction in the form of a monoblock case. Since the main task of ventilation involves the operation of the compressor unit in the same unit, it is inevitable that the user will hear the noise of the equipment. This disadvantage is a sin of all wall conditioners. Split systems, in turn, involve the separation of the main working unit and the so-called evaporative unit. The first is taken out to the street, in the same place its relatively loud work is performed, and the second module is installed indoors. With a general comparison, the obvious advantage of split systems may seem. But not all so unambiguously. The fact is that the divided design assumes the creation in the wall of a special channel for laying the connecting route. This passage is required for the communication connection of two units.
So, what is better in terms of structuralExecution: split system or air conditioning? The first option is more problematic in mounting, and the second is easier, but in the future it is necessary to prepare for unpleasant nuances in the form of noisy compressor operation.
A few years ago, two representativesclimatic equipment fully matched each other in terms of capacity and the level of performance of the optional filling. However, today the question of how the air conditioner differs from the split system in terms of functionality and performance is not so unambiguous. As for the first option, the need to place the technical stuff in one block still hampers the engineers, does not allow them to get the most out of the power figures.
From this restriction, two-blockThe designs that benefit in terms of functional provision. Deciding what is better in performance - a split system or air conditioner, it is desirable to compare the capabilities of a particular model with user requests. In some cases, a low-power installation will do, but in others it is more expedient to install a multicomponent multisystem.
Users appreciate the classic form factorfirst of all for ease of installation. Getting rid of difficult work arrangements often pushes consumers to choose such conditioners. Split systems, reviews of which mark the need for strobing walls, on the contrary, push potential buyers away. As for the disadvantages of a monoblock design, then, in addition to noise, they almost never occur.
When equipping apartments or private houses, suchinstallations practically do not show their main positive sides. This is explained by the fact that the concept of division into blocks involves working with large areas. In the question of what is better - a split-system or air-conditioning, you can not get around the convenience of use factor. So, the owners of dual-unit units note their technological superiority. This is evidenced by advanced electronic stuffing with control panels, wireless communication tools, etc.
A variety of models can completely erase everythingboundaries between representatives of two classes. Leadership positions in the general segment of climatic equipment are occupied by models Daikin, Mitsubishi, LG and other conditioners. Split systems LG, for example, are characterized by the possibility of a smooth adjustment of the microclimate parameters and the ability to serve large rooms up to 90 m2. The cost of such models is about 50-60 thousand rubles.
In the budget segment it is worth turning tomanufacturers of Hyundai, Dantex and Toshiba. Despite the affordable price tags, under these brands are produced decent quality traditional and dual-block air conditioners. Split systems, the price of which in this class is 25-35 thousand rubles, are quite suitable for use in rooms with an area of 30 m2.
It should be based on the need for regulationparameters of the microclimate. For example, for a small apartment it is necessary, first of all, to consider the variant of a one-piece system. This can be an inexpensive solution that will require minimal installation effort. However, in this case it is necessary to prepare for the weak function of the noise isolator. On the other hand, the installation of air conditioners, split systems and other climate equipment may involve the coverage of several rooms. In public and industrial buildings, while providing offices, for example, it makes sense to develop a project for a multi-system. Such installations resemble the usual split-system, but expanded due to additional evaporation modules. That is, depending on the number of rooms, the number of indoor units is also selected.
Complicating the design and filling of air conditionerscauses a broader division of the segment by species. In particular, today there are about a dozen form factors and the same types of systems that differ in the way they are installed. Nevertheless, the question of what is best - a split-system or air-conditioning, remains for many principled. The very concept, involving the separation of equipment into blocks with different functions, seems more advantageous and promising. This option is also preferable in terms of performance, since the dimensions of the external unit are almost unlimited. On the other hand, the candybar is quite justified by the love of practical users for ease of maintenance and simple installation, which also saves financial expenses. This option is really the best, when it comes to installing in a small apartment, where there is no need for high power. At the same time from a compact device and the noise will be negligible. Accordingly, the effectiveness of a particular design is determined only by taking into account the specific conditions of installation and operation.
