The process of erecting a house or a buildingincludes a rather complex set of works, in which mathematical calculations and analyzes are used. But is it really so difficult with these GOSTs and intricate calculations? Let's try to answer this question in the course of consideration of the masonry grid characteristics.
Masonry net is an auxiliary structure,which is also referred to as welded, since it is made using contact welding. In its form it is an ordinary grid (almost like a rabitsa, which stands on a neighbor's fence), which is used in the construction industry for laying walls, foundation and decoration. Here it performs the function of a reinforcing base for increasing strength. In addition, the masonry grid GOST 23279-85 can be used for the foundation of buildings and flooring. The main function of this device is to obtain an ideal flat surface. And since these characteristics should be inherent in the floor, walls and foundation, it is there that it is used as one of the main forming devices. Thus, the masonry grid is used for reinforcing all concrete and reinforced concrete structures, the main task of which is to ensure a perfectly smooth and smooth surface. Some builders call this element "a pledge of smooth walls." That is why the use of such a grid is indispensable in the construction of multi-storey residential buildings and buildings.
The mesh grid is made exclusively forindustrial equipment, since the future life of the whole house will depend on the quality of its manufacturing: it will collapse after a few months or remain unaffected for several decades. Of course, much depends on the quality of the rest of the construction materials and on the integrity of the builders themselves, but the grid as one of the components in a wide range of works is an important link in the issue of quality and reliability of structures. And it is made depending on the type and length. The mesh dimensions have different dimensions, with cells of different sizes and with different diameters (3-5 mm) of the wire used on three types of machines:
При этом каждый тип вышеперечисленного equipment for the purpose can be universal or specialized. All three machines are powered by an electric current, which is either variable or constant. In this case, the compression value of the tool being processed can vary from 0.01 to 100 kN.
The meshwork is made of strongmetal wire, which with special production technology by welding is formed into a special design with an oppositely directed rod. This type of device is one of the types of steel mesh. In this case, some types of grids from above can be covered with an additional protective layer of metal, usually zinc.
