In any building where there is a stove or fireplaceheating, you need a well-organized smoke extraction system. It plays one of the most important roles in ensuring the normal functioning of the stove / fireplace / boiler room. The most common solution for a chimney is a chimney made from the same materials as the stove, that is, from a brick. Brick pipes, of course, are cheaper, but their service life is relatively small.
Nowadays in many country housesinstall automated individual boiler rooms. The principle of the formation of smoke gases in them is different than in furnaces, so there is a need to install modern structures. A prominent representative of the new generation of pipes can be called without a glimpse the brainchild of the St. Petersburg enterprise - the chimney "Vulcan".
Proven manufacturer gives 50 yearsGuarantees for all types of chimneys produced. All smoke removal systems are made of stainless steel and metal on the latest modern German-made equipment, which for many decades has left the leading positions in the production of construction equipment. Thanks to the use of reliable heat-resistant materials, the products meet the highest standards of fire safety.
At each stage of production,quality control, which gives a 100% guarantee for all items. Verification is performed by using calibers, X-rays and laboratory methods. Chimneys are packed in boxes of corrugated cardboard, which provide additional protection during storage and transportation.
Chimney "Vulcan" in one of the mostcommon variants is a two-walled structure. What is it? Sandwich pipes for chimneys "Volcano" look like inserted in each other two pipes with a layer of thermal insulation from basalt wool. Many people are interested in what kind of houses can such structures be used for? It should be noted that the installation of chimneys "Vulcan" of this series is possible in buildings with any type of heating, not only in private, but also in production.
In addition to the already mentioned advantages: safety and versatility, you can specify a few more advantages that the chimney "Vulkan" has:
Minuses of sandwich pipes:
Next, we will talk about how to properly build a chimney "Vulcan". Installation instructions and feedback will give an idea of the process of installing the system and real examples of its use.
First on vertically arranged surfacesmount special fasteners, the gap between which should be equal to 2.5 m. This is necessary to properly assemble the chimney "Vulcan". If the site has a slope, the distance is reduced to one and a half meters. The mounting brackets are installed 10 meters from each other.
The above elements provide an opportunityChange the gaps between the smoke removal system and the wall in the way fire safety standards require. In the joint areas with different angles of slope, special tees are used, which in turn can be supplemented with special devices such as a drip tray and a module for removing combustion products.
If the surfaces in the location of the chimneyare made of combustible materials, the organization of fire-fighting cutting is obligatory. It is isolated by special flanges. How will the chimney end, decide, based on information about the type of heating, fuel and winds that are familiar in a certain area. The final details of the construction are an umbrella, a deflector and a cone. When the pipe goes beyond the roofing horizon more than 120 cm, stretch marks are installed using the clamp. Materials for roof waterproofing at the intersection with the chimney are selected depending on the roof slope. The diameter of the pipe is determined by the type of heating device, fuel, the height of the smoke extraction system.
These are the main points, which should be based on, collecting the chimney "Vulcan". The installation instructions are supplemented with SNiP 41-01-2003.
It should also pay attention to what is strictly prohibited when using chimneys:
When all these requirements are met, the bestThe choice of design for the removal of smoke will become a chimney "Vulcan". The reviews confirm the quality and reliability of the products of this brand. The owners of these systems noted the real fire resistance of sandwich-tube materials (insulating material was checked for flammability); compactness (the entire kit for assembling in a private house fits without problems in a car); relative simplicity of installation (many owners install chimneys themselves, based on the instructions and advice of other users).
It should be noted that all warranty obligationsthe manufacturer removes himself if the chimney was mounted independently, and not by a company specializing in this. Proper assembly, conducted in accordance with all norms, rules and recommendations, should ensure the uninterrupted operation of the product made of stainless steel for half a century. It is such a period declared by the manufacturer in the guarantee coupon.
In addition, to ensure that the guarantee remainsthe chimney must be purchased through the official trading network. All components of the design also have a guarantee of compliance with the norms of TU 5263-001-0151823650-2011, but it is only relevant if transportation and storage were provided in accordance with GOST 15150-69.
Transport the chimney elements to theCovered vehicle, placing them vertically and focusing on the existing norms of cargo transportation. The components of this smoke extraction system must be kept in conditions of absolute protection from precipitation and atmospheric influences.
Many varieties have a chimney "Vulcan".The price depends on which option will be chosen. The cost of a full-fledged design starts from 3000 rubles. And still the main thing, what should be guided when choosing a chimney, is the technical characteristics and high quality. After all, the safety of the building depends on them, and accordingly, the health and life of the people in it.
