After a hard work week, you want to relax andrelax outdoors. But the sultry heat or unexpected rain make them hide in the room. Salvation in this case will be cottages for recreation. They will help to shelter from the weather, while remaining outdoors. In addition, they will become a protection for storage or an alternative to a closed garage for a car. You can make them from various materials, which allows you to choose the desired shape and structure of the structure.
Summer canopy is very common.It can be seen near the private house at almost every site. And this is not surprising, considering all its advantages over other structures. The advantages include:
Наряду с этим существует только один недостаток – blowing winds. Open side parts cannot protect against wind. This drawback should be considered during construction. It is important to make the structure strong and reliable, so that the wind could not destroy it.
Photos of canopies flooded the Internet. They are found everywhere. And they are all so different in shape, color and design.
Недостаток конструкции, который проявляется в blowing winds, you can often get around if you make a canopy attached to the house. In this case, the canopy is a continuation of the roof of the house. Visor firmly attached to the house. Thus, on the one hand, wind protection will be provided.
The second type of canopy suggests that the structure will be separate from all buildings. Detached awnings resemble an umbrella, only in larger sizes.
Country canopy may differ in the type of roof. In this regard, it can be:
Going any of these suburban canopies with their own hands.
Подходить к выбору материалов для навеса necessary with an understanding of their basic characteristics. The main materials for the frame are metal and wood. Recently, increasingly used plastic pipes.
As materials for the roof most oftenchoose polycarbonate, decking, metal, plexiglass, polyethylene, slate. Various polymeric materials (for example, fiberglass), fabrics (intended for awnings), and ordinary glass can also be used.
Many other materials can be used.which are not traditional. It all depends on the vision of the owner and the overall design of the site. It is important not just to choose your favorite materials. They need to be properly combined with each other and the selected type of canopy. Let us examine several of the most popular options.
Choosing the favorite version of the shed to the dachahome, you need to draw his scheme. It will help determine the size of the structure, the number of materials needed. Following the traced drawing, it is necessary to make a marking of supports on the chosen site. The selected site needs to be prepared, having previously cleaned it and leveled the ground.
Since a tree may become unusable with time due to weather factors, it must be treated with protective agents. To do this, you can use antiseptics, primers, paints.
Polycarbonate - one of the new materials, which has several advantages. It is lightweight, easy to install, allows light to pass through and at the same time protects against precipitation.
Рассматриваемый навес будет пристраиваться к дому.His roof is sloping. This means that the supports going along the wall will be longer. The front feet are 40-50 cm shorter. Having measured the desired height, a horizontal bar is fixed on the wall of the building. For the construction of a canopy, it is recommended to take a wooden bar with a section of 9x9 cm.
Pits are prepared for supports (0.5 m is enough).It creates a cushion of rubble and sand (up to 10 cm). Inside are put supports. They must be strictly perpendicular. This can be checked using a level. When the supports are exposed, they are poured with concrete.
The next stage - the connection of the bars between them to create a frame. For this purpose, horizontal bars are fastened with the help of corners. Over them the obreshetka becomes and rafters are established.
Так как изготавливается этот вид дачных навесов from polycarbonate, it needs to be prepared. To do this, the sheets are interconnected in such a way as to obtain the intended size of the roof. This will be made easier if you use the HP-profile and thermo washer. Work at height is quite difficult. Therefore, all possible work is better to perform on the ground. After installation of polycarbonate on the batten the canopy is considered ready.
Profiled has a greater weight than, for example, polycarbonate. Therefore, it is most often fixed on a metal frame.
Metal pipe drains are located ondistance of 1 m from each other. Their total number will depend on the chosen size of the canopy. The supports are recessed 60 cm into the ground. For this, a pit is prepared, a pad of sand and rubble is filled up, and all is poured with concrete.
After drying the solution, you can proceed toinstallation of horizontal beams. They are fastened by welding. You can, of course, use connections with bolts. But this is a very troublesome and lengthy process. For lathing it is allowed to use pipes of smaller diameter.
The construction is completed with the fastening of sheeting on the crate. At the same time self-tapping screws are used.
Original and picturesque will look countrycanopies that are made using fabric. The frame in this case does not differ from the options with other types of roofing. A variety of fabric colors will help you choose the right option for the overall picture of the site, or, for example, your mood. The only disadvantage of this suburban canopy is that the fabric awning must be removed annually. At the end of the warm season awning is removed. With the onset of the next season, the fabric is fixed again.
Due to the availability of modern materials to build a canopy to the cottage can be simple ways. One of these options involves the use of PVC pipes.
For the construction of a roof with a rounded roofYou will need 2 vinyl tubes with a length of about 5 m and dense polyethylene (fabric awning). Depending on the size of preparing one piece of cloth. It can be sewn from several parts. Loops (about 40 pieces) are sewn to it, which will hold the canvas on the frame. Pipe hinges through loops.
Pegs are placed in the selected area, indicating the bearing positions. On them the construction is established. Pipes just drive into the ground.
From polypropylene pipes can be built and a rectangular canopy. To do this, they need to connect in such a way as to get a rectangular roof. Top is attached to the fabric.
We should also talk about this optioncanopy, like awnings. They are structures that can be assembled and disassembled. They, in turn, are divided into several types, each of which performs its function:
The main advantage of such structures is their mobility. They can be folded and unfolded if necessary.
Summer canopy will be a good place to relax.It can be built on its own with minimal financial costs. And you can spend a little money, but to build a solid structure for many years. They can be installed near the house, pool, favorite flowerbed. Canopies will protect the car from the weather. Arranged awnings over the seating area, barbecue grill or stove will provide reliable protection, saving during bad weather. During intense heat, it will allow you to receive a saving shadow and enjoy all the charm and charm of a warm day.
