Quite often there are situations whenthe garage seems to be necessary on the plot, but for its construction there is neither space nor extra funds. However, the protection of the vehicle is needed, and therefore you can make a carport for yourself. It is not only profitable, but also convenient.
Сегодня навесы пользуются большой популярностью.Firstly, this building is characterized by simplicity of construction, and therefore it can be built independently. Secondly, for its construction does not require a foundation, which means there is an opportunity to save, because the main amount is spent on it. Third, the canopy for cars can be built very quickly, literally ina week And fourthly, even such protection is quite enough for a car, and for giving, for example, this is just the perfect solution. It is noteworthy that for the construction of this in general, light construction does not need to spend a lot of money to buy building materials.
Any construction process should begin withthinking through the project, because even the simplest carport with their own hands must be created wisely and on the basis of correct calculations. First, you need to make a drawing of the future structure, since it will be the frame for the rest of the work. It is better if it will be made up professionally - this way it will be possible to avoid many defects and problems in the future. Secondly, after thinking through the design work, you need to correctly calculate the amount of material and make an estimate. Well, the last moment - directly buying building materials and tools.
The preparatory work is an important stage, so how to make a carport right without them is simply impossible.So, you should decide in advance on the place where the building will be located. Align this place on the site, take into account such nuances as the course of the sun, the direction of the wind, the depth of the groundwater, and so on. These nuances will allow to build a building that will be reliably protected from many natural factors. After all the above work is done, you can begin to build the frame.
Many private house owners are used to performingwork on the site yourself. Yes, and with small forms of architecture, they are familiar not by hearsay, because in almost every suburban area there is a gazebo, created on its own. Choosing how to build a carport, you must first determine the material. For example, polycarbonate is very popular for this purpose: it is laid on the base of the roof, which has been prepared in advance, and is fixed by means of special fasteners. Its peculiarity is that it protects polycarbonate from cracking, expansion or contraction as a result of exposure to temperature drops, leaks, and so on.
Навес для машины из поликарбоната хорош тем, что it is inexpensive, practical in terms of operation - for a small building it is the most optimal solution. In this case, it should be laid neatly, correctly, and therefore the help of a professional will never hurt. A small mass of material is sufficient for secure fastening to the frame. At the same time the canopy is protected from gusts of wind and loads on the base.
Этот материал имеет среднюю тяжесть, поэтому если to build a similar carport with your own hands, you need to think about the construction of a solid base and frame. Most often, customers prefer to build a house and attach a shed to it - such a constructive solution will correspond to the design and shape of the building. In addition, this method is more convenient, since the building will be built simultaneously with the construction of the house. Due to the metal or forged frame, as well as metal tiles, which will cover the canopy, you get a kind of platform for the car, protected from all sides. And if you equip this site with a quality foundation and build a path to it, the overall design will be very stylish and interesting.
Deciding how to make a carport, preferuse tent. The peculiarity of this design is in its ease and mobility, since it can be put on any place of the plot. In addition, if you need a canopy at the dacha, then this solution is the most advantageous and appropriate.
Особенность такой постройки – оперативное erection At the same time, a carport made of wood will be different in practicality and durability, and in the case of proper operation and processing it will last for more than a dozen years. For construction, you can use both a timber and a rounded log - in any case, the wood will look natural, stylish, close to nature and at the same time meet the requirements of environmental safety. On the other hand, it is important that landscape design is performed in a single style decision. And because next to the brick cottage wooden canopy will not look so harmonious and organic.
You can build a carport with their own hands andmade of metal, and this requires inexpensive and lightweight materials, which will be placed on top of the awning. The main thing that the design was reliable, capital and rigid, especially if to be covered the construction will be slate and metal tile.
Folding and prefabricated construction - this is the bestSelection for small areas. First, they are standard size. Secondly, they are completely ready for installation directly at the facility. Thirdly, modern prefabricated systems are developed for different types of coverage, so each customer will be able to choose the best option for themselves. Therefore, instead of building a carport with your own hands, you can fully take advantage of ready-made solutions. The design of the canopy is simple, the assembly also does not cause difficulties, so you can cope with the installation and small efforts. You will only cover it with suitable or available materials.
Country house owners and whole residencesstrive for maximum comfort and brightness of the landscape. Wrought awnings are perfect for implementing various design ideas. Of course, they are expensive, and roofing materials will have to be chosen more carefully. At the same time, the installation process is also not very simple, and therefore it is unlikely to be possible to manage without the participation of a professional team. If you decide to install a forged canopy, it is important that it fits well with the surrounding landscape. For example, in the vicinity of a simple cottage such a construction would look ridiculous. But on a large suburban area with a spacious cottage is quite a decent option.
To begin, mark up its location on the site.The second point - the construction of a trim, which will become an auxiliary structure for future construction. Thanks to it, you can correctly position the support pillars. To install them, we dig holes up to one meter deep, pour them on a small level with concrete, lay the supports, fill the rest of the solution. Give time for the concrete to harden (this takes up to three days). After that, you need to attach the support beams to the pillars with screws. To make the structure more rigid and reliable, you can use struts, which will also be attached to the posts and supporting beams. The frame of our canopy is ready. Now it's up to the roofing system (in the simplest version, it is shed).
