Теплоноситель «Теплый дом ЭКО-30» представляет Antifreeze, which is used for heating, cooling and water supply systems. In the production process, patented inhibitors with anti-corrosion resistance are used, as well as additives that guarantee the protection of equipment from corrosion, freezing, foaming, precipitation and scale. The tool is perfectly compatible with seals and plastic materials, as well as rubber.
Heat carrier "Warm home EKO-30" has a highstability and guarantees a permanent job for five years. In order to obtain a mixture of the desired temperature, it should be diluted with ordinary tap or distilled water. If you add 10% of the liquid, the temperature of the start of the crystallization process will be -25 ° C, when the volume increases to 20%, the temperature rises to -20 ° C.
The system can not be destroyed, because the describedantifreeze does not increase in volume during freezing, but only becomes gel-like. The heat carrier “Warm home ECO-30” can be diluted with water, this allows to reduce its viscosity and increase the heat capacity, as well as improve circulation.
The best solution is dilution.means up to the crystallization level of -25 ° C, this is true for electrical boiler equipment. If we are talking about gas boilers, then this parameter should be -20 ° C. Using the same composition, which has a lower crystallization temperature, can cause glycol glycol on the heating elements or in the area of the burner, which will lead to tar precipitation and a situation where heating elements simply burn out.
Heat carrier "Warm home EKO-30" canbe used for a period that will depend on the conditions of use. You should not bring the tool to such a temperature that it boils, because when the temperature rises to 170 ° C, thermal decomposition of the additives and propylene glycol begins to occur. Therefore, in the boilers should ensure good circulation of the substance described.
If you decide to use for heating systemyour home coolant "Warm home ECO-30", reviews about it will be able to help you understand its features. Thus, consumers argue that in order to avoid unpleasant situations, the coolant should be diluted, as recommended above. It is important to supplement the system with a good circulation pumping unit, which has more outstanding characteristics than the devices that run on water.
Что касается производительности, то, как consumers say that this parameter should be 10% higher, while the pressure should be 60% more. At negative temperatures, the coolant, according to customers, should be heated gradually, and immediately turn on the equipment at full capacity should not be.
According to experts, the coolant "Warm homeECO-30 "(20kg) has a more impressive coefficient of expansion, if compared with water, which indicates the need to respect the volume of the expansion tank. This parameter is 15% of the coolant volume or more.
Buyers also like what is being described.The products are completely safe for human and animal health. The composition has a tolerance for use as a refrigerant in the food industry. However, this does not mean that the tool can be eaten!
The evaporation of such a heat carrier is completelysafe for health. Buyers especially emphasize that the heat carrier “ECO-30 Warm House”, the characteristics of which are presented in the article, is explosion and fire safe, it has a certificate of conformity and conclusions of sanitary and epidemiological services.
After 5 years of operation, thisthe substance becomes a low-freezing liquid, but the resource of additives will be exhausted, as well as the ability to resist corrosion. That is why the coolant "Warm home ECO-30", the instruction manual of which will be presented in the article, must be drained and disposed of. Before pouring in a new coolant, it is important to check all joints and flush the system.
Теплоноситель "Теплый дом ЭКО-30" (20 кг) должен poured into the system with galvanized pipes, as their internal walls can cause precipitation. It should not be used in systems with electrolysis boilers and should not be mixed with other heat transfer fluids without first checking what consequences this may have. The easiest outcome option in this case will be the deterioration of the operational characteristics of the composition.
The heat carrier is intended only for technicaluse, because ethylene glycol when administered orally is a toxic substance. In order to eliminate poisoning, it is important to be sure that the product does not get into food or water. If the composition got on the skin, it should be washed well with soap and water.
If you decide to dilute the coolant with water fromwells or wells, where a high content of metals and salts can be noted, should be mixed with water in a transparent container. At the same time it is important to keep the necessary proportion. Once you are sure that there is no sediment, you can mix in the correct amount to fill the heating system.
This can be done before the Gulf funds insystem, which is especially true of systems that operate on the principle of natural circulation. As an alternative solution, sometimes the technology is used, in which the flooding takes place alternately, while the coolant can be prepared in separate small portions.
The heat carrier "Warm Home" comes in a containerdifferent volume. The latter varies from 10 to 50 liters. If there is a need to purchase a more impressive volume of the named composition, then you should make it to order. In this case, the volume of the barrel will be 216 liters. Sometimes the product is shipped in bulk, for which fuel trucks or cubes are used.
