Pumping equipment is currently usedeverywhere, it is necessary in industry and in everyday life. One of the most popular today is the pumping station "Jambo", which is offered for sale in several varieties. For example, centrifugal pumps have a built-in ejector that is connected to the pipes, which contributes to efficient absorption of the liquid. The pump does not impose special requirements on the purity of water, in addition, it may contain dissolved gases. If you are interested in this product, you should learn more about some models, each of which has certain characteristics. Choose a device is necessary depending on the required capacity and load on the equipment, otherwise you can overpay or face the insufficient power of the models. They will be discussed below.
This model will cost the consumer 8500 rubles., it is a device that cope with the supply of clean water from reservoirs, wells, wells and open reservoirs. This pump is used to increase pressure in the mains, as well as for water supply and irrigation planting. According to buyers, the installation for solving tasks in the suburban area is perfect.
The Gilex Jambo 24 pump station may beimmersed at 9 m, while the maximum head of water is 35 m. With regard to the maximum volume of fluid supply, in one minute you can get 60 liters. At an hour the station's throughput reaches 3.6 m3. This equipment operates from the networkvoltage 220-230 V, which is very convenient in everyday life. According to users, it is possible to get clean water at the outlet, and at the time of absorption the size of the filtered particles can reach 5 mm. The permissible water temperature can vary from 1 to 50 ° C. You need a parameter such as the diameter of the connector of the connection, it is one inch. Users emphasize that using the device is very convenient, because the length of the power cord is 10 m.
The Jambo 60/35 pump station shouldinstalled horizontally, the ambient temperature can vary from 1 to 35 ° C. In the design there is a pressure tank, but the control is automatic. The pressure in the system will be maintained at a certain level. The capacity of the tank is 24 liters. A winning feature of this model is electronic level control. The pump will automatically monitor the flow by shutting down and turning on when pressure is equalized. The equipment will be switched off on its own if the pressure drops. But the necessary pressure parameters can be set by the user independently.
The Gilex Jumbo 60/35 pump station is attachedwith the help of connecting fittings. The device is supplemented with an integrated ejector, a pressure switch, a hydraulic accumulator and a manometer. Durability is ensured by the cast-iron body, as well as the most durable impeller, which is manufactured using high-quality plastic. The motor is protected from overheating by cooling the fan, the thermostat shuts off the pump if the engine starts to overheat. Protection against overheating is activated at the moment when the temperature on the winding rises to a critical limit.
Pumping station "Jambo 70/50" will costthe consumer at 13 500 rubles., This price, according to customers, is quite acceptable. The equipment has a capacity of 1100 watts, and the maximum water productivity is 4200 liters per hour. The equipment will be capable of pumping water from a depth of 9 m, whereas the liquid must be clean. The maximum height is 50 m, the tank volume is 24 liters. According to users, the case is durable, because it is based on stainless steel. The weight of the device is quite impressive and is 16.8 kg. This, as consumers say, is not always convenient.
The Jilex Jambo 70 pump station hasthere are many advantages, but there are some disadvantages. A number of users, for example, notes that the duralumin of the hull after a while becomes unfit for use. Despite the fact that the manufacturer provided the equipment with a smooth start-up, some consumers doubt this. Among the advantages are the fact that the body is based on stainless steel. If you install the equipment in the well house, where the humidity is quite high, then the material perfectly copes with aggressive influences. The pressure, as practice shows, at the output is quite high, but the operation of the device is accompanied by noise. That's why, if you use the pump station "Jumbo", it is best to make a noise isolation of the well, which will make the stay at the site more comfortable.
The power consumption of the model is 500 watts, and the volume of the storage tank is 24 liters. The capacity of the equipment reaches 3 m3 for an hour, you can purchase this devicefor 3600 rubles. This station is economical, cheap and simple in design. The main purpose is to supply water to the country plots and houses, which are located 28 meters from the premises where the equipment is installed. This pump station "Jambo" almost does not differ in composition from other samples of the company's lineup, however the power consumption is the lowest. And to install this station, it is necessary to connect a check valve to the suction pipe. If an open reservoir or well is used as a source, a check valve is installed at the end of the pipe, in a well such a placement method is acceptable in the presence of a casing.
This pumping station "Jambo" shouldconnect to the suction pipe, which gradually rises to the equipment, there should not be any difference in altitude, since air can accumulate in these places.
When installing pumping equipment companies"Jumbo" must be checked to ensure that all connections are sealed, otherwise there will be a suction of air in the intake pipeline. If you encounter such a problem, the device will simply stop feeding water. Eliminate this problem can be quite simple, you just need to remove the differences in height, then the device will resume.
