Today, many solutions to the problem have been developed,which consists in the coloring of surfaces with water-soluble compounds. One of them is the use of a roller, it is important not only to choose the right coating, but also the tool itself, which can be made of different materials. You can apply the usual brush, but the strokes will be too noticeable, which is unacceptable for ceiling finishing. The surface will look unevenly colored. However, to refrain from using the brush is not worth it, since it will be needed to paint hard-to-reach places and corners.
Если перед вами встал вопрос о том, каким валиком to paint the ceiling with water-based paint, then the tools on the market should be considered. The working part of the roller can be fleecy, velor or foam. Prices for these products are not too different from each other and can be misleading the consumer. Despite this, the tools are different, and the selected roller will be able to affect the quality of the paint.
If you are tormented by the question of how rollerto paint the ceiling with water-based paint, then attention should be paid to the experience of most consumers, which indicates that the product with the threads that make up the nap is best recommended. Foam roller can not be compared with a fleecy product due to the high ability to absorb paint, as a result of which the composition accumulates on the ceiling surface and can form bubbles. But velor tools are not able to capture a lot of paint, so the problem described is excluded.
If necessary, staining a large areasurfaces need to give preference to a wide roller, which will complete the work in a shorter time. The length of the pile tool will depend on the type of surface being treated. If you decide to use fire retardant paint, it is best to use foam or fleecy options. If you are still thinking about how to paint the ceiling with water-based paint, then it is best to choose a fleecy product, the threads of which have an average length. In this case, it will be possible to achieve a not so impressive absorption of paint, so you can easily apply the composition to the surface of a large area. But a short nap can completely leave unpainted areas.
When indoors the ceiling surface hasrough structure, you need to pay attention to products with a long nap, only with its help you will be able to cover the entire texture by filling in the recesses. It is not recommended to use a tool made of foam rubber, this also applies to the case when the handle is attached with a bolt, because such solutions quickly become useless.
Many home masters before repairthink about how to paint the ceiling with water-based paint. When visiting the store it is important to be able to check the instrument for quality. To do this, it is clamped in the hand, and the working part in this case should not be deformed. It is important to pay attention to the seam, which should not have an explicit joint. If it is still present, then stripes may be left on the surface during dyeing. Experts advise to pull the villi, which should not be pulled out. Otherwise, elements will spoil the appearance on the painted surface.
When a ceiling roller is selected, it is necessarytake care of the availability of dishes to work with the tool. If you want to achieve a positive result, it is best to abandon the use of a conventional bucket. It is necessary to use only the special pallet which is intended for coloring of surfaces. Among other things, it is necessary to prepare a telescopic tube that will eliminate the use of scaffolding. After all, not every home craftsman in the arsenal has ladders and other similar devices. But with the help of a telescopic tube, you can easily reach hard-to-reach places.
Those consumers who think about whichroller better, consider all options, among them should be made of foam product. Its main advantages are low cost and accessibility, as well as the ability to choose a product from a material of different textures. Experts advise to pay attention to the density of foam rubber, which causes resistance to mechanical stress. By purchasing such a tool, you must be prepared for the fact that paint consumption will be increased, because, as mentioned above, foam rubber absorbs the composition in an excessively large volume. If it is necessary to process a large area, then the surface may acquire an uneven shade, because the paint will be absorbed into the foam rubber and will form bubbles.
When deciding how to paint with a rollerceiling paint, you can consider velor products that are suitable for smooth and even surfaces. This material is synthetic and is cheaper compared to mohair rollers. The undoubted advantage of velor is resistance to the negative effects of solvents. But the master when using this tool may experience some inconvenience, which are expressed in poor absorption of paint material. For a smooth and monochromatic coating, you will have to dip the tool into the solution too often, this can be inconvenient.
Painting the ceiling with a roller can be done withusing a tool that has a nap. For hard surfaces, it is best to use a product with long threads. The material at the base will affect the cost. Thus, rollers made of natural felt and fur will cost more compared to artificial substitutes. The quality of the coat will determine the results of dyeing, so you should not save on the tool. As practice shows, the pile has some advantages, which consist in the ability to correct the absorption of paint, to carry out decorative paint work, as well as the possibility of creating a uniform coating of porous and rough surfaces. It is worth remembering that the decorative work is best obtained using a roller with a short nap. And if you prefer natural material, then the tool will serve more than one repair.
Before painting with water-based paintceiling, it must be diluted to the desired consistency, following the recommendations in the instructions. The most frequently required addition of water in the amount of ten percent. Anyway, it is necessary to mix the compound yourself, using a drill with a nozzle. It is not necessary to apply for work that roller with which the primer was applied. For water-based paint is best to use a new tool or replace the working part. If you are faced with the question of how to paint the ceiling with a water-based paint, then you should know that you shouldn’t completely dip the tool, you just need to dip it. The composition should be evenly distributed on the surface of the coat, for this roll is rolled on the pallet, but not on the surface of the ceiling. If you fail to wet the working part of the roller evenly, then you will encounter undyed zones, where spots will form.
Before you begin to paint the surface of the ceiling, you should practice on any part of the wall or a piece of drywall. This will allow you to avoid many mistakes.
Начинать окрашивать потолок необходимо only during daylight hours, it is best to use additional lighting. It is necessary to begin work from the far corner or from the side of the window, moving towards the door. The paint should be applied as evenly as possible, the process should not be delayed. Application should be carried out in parallel stripes, with each following should overlap the previous one by 100 cm. The paint should be rubbed on the surface as carefully as possible, making sure that it does not dry out on the edge.
When working the master is not recommended to tear offroller from the surface of the ceiling, and the flow of the composition is controlled by pressure. From time to time it is necessary to move away from the area to be painted in order to check whether undyed zones have formed. If these errors have all turned out, then they can be corrected by sanding the painted surface with sandpaper with a large number. Each next layer is applied perpendicular to the previous one, and its application should be carried out only after the paint has completely dried.
Each master mustthink about what you need to paint the ceiling in the apartment. Among the tools should highlight the roller capacity and brush. It is desirable that the set of interchangeable coats is attached to the roller. This will simplify the work, and also eliminate the need to re-visit the store if the coat is damaged. You can also choose a roller with limiters as well as regulators. The presence of such auxiliary elements increases the cost of the tool, but facilitates the work process.
