Izovol (insulation): technical characteristics and features

A warm house is an important time in construction.A rough mistake is the insulation of only the walls of the house. Undoubtedly, it will be much cheaper at the construction stage, but with the further exploitation of the building, a large amount of money will be left for heating. Also, the overall comfort of using the house will be disturbed. It is necessary to insulate not only the walls, but also the ceiling and the floor. Only then will the heat in the house be evenly circulated and, accordingly, less money will be spent on heating. For good thermal insulation can be used isovol - heater, technical characteristics of which are not inferior to the parameters of others. During the installation there is one nuance: for the walls of the house is used less material than for the ceiling and floor. The difference in thickness should be up to 50 percent. Izovol - a heater, the price of which is quite low, - will save money by using more material.

What types of insulation are

For the insulation of frame houses most oftenapply synthetic insulation, namely: isoval, polyurethane foam, mineral wool, ecowool. Each of them is characterized by its pluses and minuses. For example, isovol - a heater, the technical characteristics of which make it possible to apply it for any type of house, which is a big plus.

Izovol

It is a basalt glass fiber,It is made of natural materials, such as glass and sand. It affects its ability to withstand phenomenal loads. Even under the most insignificant pressure, the isoval takes a compressed form. Very elastic, which contributes to a dense coating of different parts of walls or ceilings. It is completely incombustible, withstanding the heating temperature up to 750 degrees. Provides good sound insulation and thermal insulation. It is not harmful to human health and pets. Many companies offer isovol insulation. Reviews about it are mostly appreciated.

Main characteristics

1. Basalt insulation has a lowthermal conductivity, due to the fibrous and porous structure. This type of configuration significantly slows the heat exchange, preventing the domestic heat from evaporating. Significantly reduces the cost of heating.
2. Long service life.Basalt fiber has a great strength, which has been tested over the last fifty years. During this period, the heat and moisture resistance indicators did not decrease even by a percentage. This was due to the model of a unique composition, which is not possessed by any kind of insulation.
3. Hydrostatic stability.It is known that every year the building materials used in the construction are influenced by various external conditions, including high humidity in the autumn-spring period. High hygroscopicity of basalt fiber provides a constant quality level of insulation.
4. Ecological compatibility.Basalt insulation isoval has a high natural purity, as it does not contain harmful impurities and fillers. Long-term use of basalt fiber provides the necessary hygienic level and overall quality of life.
5. Simple application.Some types of materials intended for insulation, imply the use of special equipment. Izovol, a heater, whose technical characteristics imply its independent use, is much more convenient to use.
6. Water vapor permeability.Despite the non-compliance with the effects of moisture, the isowola has a good vapor barrier. At an elevated level of humidity, the necessary amount of moisture remains in the house, and the remaining evaporates, that is, leaves the outside. The walls of the house and the finishing materials remain dry.
7. Chemical resistance. Natural basalt stone has a high resistance and does not react with various solvents, alkalis or acids.

Availability and soundproofing

Basalt fiber has a dense structure,which provides a good level of protection from external hum. Izovol - a heater, the technical characteristics of which fully comply with the norms of SNiP 23-03-2003 "Protection against noise". Many types of insulation have a fairly low cost. At the same rate you can buy and isovol - insulation, the price of which is also low. Packing of 6 pieces in the size 1000 * 600 * 100 mm will cost 420 rubles. The packing of a 1000x600x75 mm isovol (3.6 sq. M, 0.27 cubic meters) will be cheaper - 315 rubles.