/ / Heater "Technoruf V60": technical characteristics, application areas and operation features

Thermal Insulator "Tekhnoruf V60": technical characteristics, application areas and operation features

Any large modern construction project needstechnological heat-insulating materials with high performance indicators. Russian company "Tekhnonikol" is a manufacturer of universal mineral cookers "Technoruf V60". They are widely used both in the construction of civil and industrial facilities due to their high unique qualities.

Technoruf V60: technical specifications and features

The material is a slab sized1200x600 mm with a thickness of 50 or 100 mm. The basis of the thermal insulator is basalt (rock mineral), from which the fibers are produced - the threads, which are firmly connected together, constitute the basis of "Technoruf B60". Technical characteristics of this product for thermal conductivity: not more than 0,038 W / (m 0C) at a temperature of 25 0FROM.

Technorough B60 specifications

Basalt melts at a temperature of more than 1000 0With, and at manufacture of plates of a heater it warm up and at all up to 1500 0C. Therefore, "Technoruf V60" is not combustible and it can be used as a fire protection. However, the organic resin - a binder of basalt fibers - at a temperature of 300 0C evaporates, which negatively affects the index of strength.

All mineral wool plates are processedspecial water-repellent composition, thanks to which the technical characteristics of water absorption and vapor permeability parameters are not more than 1.5% and not less than 0.3 mg / (m.ch.Pa), respectively, for Technoruf B60. These qualities are especially important during installation, as they do not allow rain, fog and other atmospheric phenomena to damage the material and disrupt its performance.

Where is Technorux B60 used?

The main purpose of this material isthermal insulation of roofs, both exploited (flat) and unexploited (executed under a slope), as well as other building structures (foundation, bearing walls, floors) made of metal and reinforced concrete. The greatest application was in the development of exploited roofs (because it withstands frequent point loads), where it serves as the top layer of thermal insulation.

Heat Insulator

In addition, it can also be applied on rooftops without screed. This is due to the fact that the "Technoruf V60" technical characteristics of the indicators:

  • compressive strength - not less than 60 kPa at 10% deformation;
  • strength to peel layers - at least 15 kPa.

Practicality of the material

In addition to excellent thermal insulation andwater-repellent indicators, "Technoruf V60" insulation technical specifications for noise insulation can be used as a soundproof material. Plates are harmless and environmentally friendly: they are chemically neutral when interacting with building materials and substances contained in the air. All these qualities make it possible to use this material in multi-storey civil buildings, private buildings (cottages, country houses, villas), industrial facilities.

Technorough B60 density

It is able to perform its functions at temperatures from -60 to 400 0C. Plates of mineral wool "Technoruf V60", density of which is 180 kg / m3, have a low specific gravity, and are also easily cut and mounted (do not require special equipment), so the laying process takes place in a short time.

Liked:
0
Popular Posts
Spiritual development
Food
yup