Will help to create trees from the bead weaving scheme. Birch, Sakura and other trees will turn out to be unusually beautiful, picturesque, if you follow them and the description of the works.
If you want to make birch, for its production you will need:
They will tell you how to make trees from beads, weaving schemes. First, pour the beads of all colors into a suitable container, mix. When stringing you will take it in a chaotic manner.
We start with the consciousness of the first branch.In one hand you have a coil of wire with a thickness of 0.3 mm, in the other - the first thing beads. Thread it onto the tip of the wire, stretch it a little further, then take the second bead with the hole. So collect 12 beads. Connect the first with the last, twist the wire under them, so that you have a “leg” of 1 cm high.
Step back the same and make the second leaf,which is hollow inside and consists of 12 beads. These 5 leaves will be on one side of the branch. Make another 3 leaflets that will become the top of the branch, then follow another 5 loops. They will be on the other side of the branch.
So begin to make trees from beads.Weaving patterns are so simple that you can do without them. As a result, you have a branch consisting of five leaves on the left and right side, and 3 leaves are apical.
In the same technique, create another 49 branches.Now they need to be grouped by five. To do this, leave the end of the wire free, now simply twist these parts of the branches so that each consists of five blanks.
Cut from a wire with a thickness of 1 mm cut10 cm long, attach it to the free part of the branches, secure with floral tape. You got 10 big branches, each of which consists of five small ones.
Cover the floral ribbon with white paint. When it dries, brush the top black. When it dries, start collecting birch.
To do this, cut a piece of aluminumwire, which has a cross section of 3 mm. Start on top of the double-sided tape and floral tape to attach branches to it. Make a thickening towards the bottom of the trunk. To do this, first wind the bandage here, and then tape and floristic tape.
Put the birch in a bowl, fasten. In the same way other trees are made of beads, the weaving schemes of which are so simple that even beginning masters can reproduce them.
You can fix the barrel with plasticine or first cut a piece of thick foam of suitable diameter, put it into a bowl and stick an end of aluminum wire into it.
To keep a birch tree or another tree strong, in a separate bowl mix 1 part of PVA glue, two - alabaster. Add enough water to make a solution that looks like liquid curd.
Apply it on pre-moistened with water.the tree trunk is needed without delay, as alabaster hardens very quickly. Put the remaining solution into the pot in which the tree is located in order to fix the birch in this position.
When it dries, cover it with 2-3 layers of whitepaints. When each of them dries, make a few strokes with black paint to make the birch look like real. Paint the surface of the alabaster in a bowl, decorate it with colored stones.
Create branches for this tree usingown fantasy. May be the same as in birch, weaving beads. The trees (sakura) scheme allows you to make very beautiful. The number of beads on one swallow may be the same as in newly created birch. But you need beads not green, but pink, take some white. Mix these small beads, string them, too, by 12 pieces to create one leaf.
In the same way as in the first sample, fastenbranches 5, form the trunk with 2-sided tape and floristic tape. Intentionally do on the branches, trunk irregularities, so that the tree looks natural after the weaving is finished.
Trees (sakura), the scheme of whichso simple, you need to fix in the tank. This will help mixture of alabaster with water and white glue. To make it seem like a tree is growing, lay moss around it. It is enough to moisturize it sometimes, and this natural material will be green for a long time, and the sakura above it will look even more beautiful.
Almost the same technology makes trees from beads. Weaving schemes for the most beginners will be presented below.
As seen in the photo, you first needstrung on a thin wire 5 beads. Then bend it, push it into the penultimate, fourth bead, then into the third, second, first. After that, thread on the same wire, having previously bent it at an angle of 45 °, another 5 beads, again pass the end of the wire through four of them.
Having thus collected 3 fragments, in each ofwhich are five beads, make two more below. Each of them will consist of 7 beads with holes. The sample will facilitate weaving beads. The money tree, the scheme for creating leaves of branches for which may be exactly the same, is also very interesting to do.
Leaves on it may be such as in the photo.On the central scheme, the sheet consists of seven sticks, each of which is strung with 10 beads. You can make a sheet of 22 pieces of wire, as seen in the last diagram.
When the branches are ready, tie themseveral coins in which holes are drilled. You can cut the rings out of gold-colored paper, glue them together in pairs and also fasten them on the branches with a rope or thin ribbons.
If you wish, use a simpler method and make not only money, but also other trees from beads. Bonsai weaving patterns are also simple.
Cut 0.3-0.4 mm thick pieces of wire45 cm long. Each of them will soon turn into a branch. Take a little over 200 g of beads of green shades, as well as yellow, mix them in a container.
Type on the first wire as many beads,so that he covers her by 15 cm. Take a wooden stick for sushi, wind a piece of wire covered with beads on it. Slide one ring through the resulting ring and the other end of the wire to the other side, tighten.
In the same way, make two more branches, twist them together, as shown in the photo. Using floristic ribbon, connect 3-4 branches. Then take 4 such blanks, tape them.
It remains to connect the branches and, observing the asymmetry, fix the bonsai in the tank. This is how trees are made of beads, the weaving patterns of which are simple and clear.
