Carbon filters "Folter" are sorption devices that are designed for air purification.
This device is presented for sale under differentindices, namely: 302, 304 and 301. Each model has its own characteristics, performance and size. Below will be presented the qualitative characteristics for the filter grades 301, 302 and 304, respectively. Performance in the first case is 1700, in the second - 2900 and in the third - 3500 cubic meters per hour. It is important to take into account the aerodynamic drag, for each model it is 130 Pa. Filtration area varies and is equivalent to 6, 9 and 12 square meters.
Mass of activated carbon in each modelis 2.4; 4.8 and 3.6 kilograms. The recommended operating parameters for each model remain the same, the temperature is 30 degrees, but no more, but as for humidity, its level should be 60% or less. When choosing a particular model, it is necessary to take into account the overall dimensions. For the 301 filter, they are 592x287x292 millimeters. Model 302 is limited to the following dimensions: 592x592x292 millimeters. Model 304 has dimensions equal to 592x490x292 millimeters. When choosing the described “Falter” carbon filters, you must take into account the fact that their mass is different. In the first case, this value is 7 kilograms, in the second - 12, while in the third - 9.5.
The cell panel is of high quality andfavorable cost. Folded carbon filters are used to clean exhaust, supply and recirculated air from odors, gaseous pollution in air conditioning and ventilation systems. It is possible to use such installations for premises of various purposes, namely medical institutions, residential buildings and administrative buildings. Coal filters "Folter" can be used to clean the air to environmental and sanitary standards, they can be used to improve the quality of fresh air to increased comfort.
The above carbon filters "Folter" have inThe body consists of galvanized steel, inside of which a filtering element is laid in the form of folds. In order to prevent sticking of the adjacent folds, corrugated separators are laid between them, which are made of aluminum foil. The filter bag, which contains material with a padded separator, is reliably sealed in the housing with a sealing material for filling with sealant. The filter material itself consists of polyester fibers, between which there are small granules of activated carbon. Polyester fibers retain the frame base, thereby eliminating the removal of small particles of coal from the filtering layer.
Carbon filters for hoods "Folter"are used to remove steam and gaseous impurities from the air, which are processed by the fine-porous structure of coal. In order to ensure the normal operation of the device, it is necessary to install a class F7 filter in front of it. It can be models FyaK or ФаС-F. With the help of such additions it will be possible to protect the filter layer from contamination by aerosols, which reduce the sorption capacity of coal. If during the operation to perform these recommendations, the aerodynamic resistance of the cellular filter will remain almost unchanged.
If you are considering air filters"Folter", you should pay attention to the aforementioned brand, which is a section of the carbon filter. The device is designed to clean the air from steam and gaseous pollution, which can be inorganic, organic and molecular. Among other things, such filters are installed in exhaust ventilation systems of cafes, kitchens, restaurants and sewage treatment plants.
The aforementioned Folter air filters consist offrom the metal case which is supplied with flanges on an exit and an entrance. In the flanges there are openings for connecting the device with the corresponding flanges of the ventilation system. Bolts are used for this, rubber acts as a seal. The section is equipped with a door through which access to the filtering elements is made, the latter are set along U-shaped guides.
Such carbon filters for hoods "Folter" canTo be equipped with the most different types of sorbents, this can include activated carbon with certain properties and characteristics, as well as chemisorbent.
On sale can be found 2 varietiesdescribed filters: SUF-0 and SUF-2. The latter option, unlike the first one, is supplied with an additional filter, which is installed at the air outlet. This is necessary due to the fact that at the initial stage of operation there is a possibility of insignificant removal of small fractional coal or chemisorbent from the cells. As soon as the door closes, the filter is sealed in the housing, sealing is provided by a seal and clamps.
Pulter Cartridge Filters with Pulsed PurgeThey are used to efficiently clean gases or air from all types of dust, which include solid aerosols and fine dispersion elements. The concentration of foreign elements in the cleaned air should not exceed 10 grams per cubic meter. Before this device, it is recommended to install a preliminary degree of cleaning, represented by the simplest dry dust collector.
“Falter” cartridge filters are moreeffective in comparison with sleeves, they are able to catch fine aerosols, which are formed during laser or plasma cutting, welding and during other technological processes. In some cases, air purification according to this principle can be performed with the purpose of recycling, which saves heat during the heating season.
The cartridge filter has a body whichit is divided into two separate sections, one of which is for purified, the other for polluted air. Among other things, the device has filter elements, a valve section with control electromagnets and a cartridge regeneration control system.
The bag filter "Folter" is used forhighly effective cleaning of highly dusty gas or air from dust in aspiration exhaust systems of various industries, namely: woodworking, metallurgical, construction industry and chemical. It is important to choose the right filter depending on the tasks that will be put in front of the equipment. Bag-type “Folter” ventilation filters are able to cope with polluted air, which is non-toxic, explosive and fire-hazardous. You can independently select a device of a specific model for trapping explosive dust or a filter that is used to clean high-temperature gases (up to 260 degrees).
