Многие хозяева загородного дома или дачи мечтают about your own pool. You can splash around in the summer heat, have fun with the whole family. To build a stationary structure is not for everyone. However, there is a way out. You can collect the frame pools with their own hands. A step-by-step instruction of this process will be presented below.
Collect frame pools with their own hands (photoSuch work is presented below) is quite simple. This type of construction has many advantages. Stationary pools are more expensive. The frame pool consists of steel fences. They are partitions that hold water inside the tank. From above the framework becomes covered by a special film. To make the use of the bowl more comfortable, the edges are trimmed with plastic edges. The presented design necessarily consists of a system that filters water.
In favor of frame pools speaks themacceptable cost. Practically everyone can install such bowls. If the owners of the house can allocate quite a few funds from the family budget for the arrangement of the pool, the installation of a frame construction will be the best solution.
In addition to easy assembly, a similar pool is different.also ease of operation. It is very easy to change the water. In the bottom of the structure there is a special crane. A hose is attached to it through which water will flow. It can be used for watering beds, garden trees and shrubs.
Arrangement frame pool do not do it yourselfcauses particular difficulties. The design will easily fit into almost any landscape design. It also does not need to be dismantled for the winter. This is true only if properly installed.
Among the shortcomings are limiteddimensions of the product. Its depth can not exceed 1.8 m. When choosing a material can not save. The film must be of high quality. Otherwise, it will not be durable. It will be required to frequently carry out repair of the coating.
By installing a frame pool with your hands oncottage, you can assemble a solid and durable construction. It can be of different types. The difference lies in the features of the frame. According to this criterion, leaf and rod varieties are distinguished. The first of these options is characterized by increased durability. Core frames are cheaper. However, they are inferior to leaf varieties in terms of strength. In metal core structures, only the top hoop is assembled.
Bowls are made of PVC. In some cases, collect a frame pool of wood with their own hands. Can also be used for supports and plastic.
Also pools can be divided into year-round.and seasonal. They must include a ladder. However, each of these types of pools is characterized by the presence of a certain configuration.
Seasonal pools are part of the designcartridge filtration system. It includes two nozzles. They serve for the intake and supply of water. Also included are hoses. It is possible to assemble a seasonal pool in a few days. At the end of the season, it is quickly dismantled and hidden in a warm storage room.
All-season models are characterized by the presence of enhancededging. At the same time the system has a sand filter. The same cleaners are used for stationary pools. The system also includes skimmers that are not available in seasonal varieties. Pools that are used year-round, also have in their composition hoses, nozzles for returning water. Such systems come with a stronger pump. This allows you to clean the water and the bottom of the bowl quality.
How to make a frame pool with your own hands?This is an easy task. However, it will require some knowledge from the master. All actions should be carried out according to special instructions. First choose the right place to install this product. The surface of the installation site must be flat. Small elevation differences are permissible. This is one of the features of high-quality frame pools.
Large frame-type pool causesa lot of trouble in the process of its maintenance. Therefore, it is better to give preference to small and medium-sized bowls. The choice depends on the size of the infield. If the pool is large, it will be difficult to drain water from it. Also, cleaning will require a lot of time and effort. To fill the bowl you need a lot of water. This process will also take a long time. Therefore, there is practically no prefabricated type of pool on sale that would have large dimensions.
When choosing a place to install a pool, you need to determine where the power point to the water supply is located. The closer it is to the structure, the easier it will be to exploit the structure.
It is worth considering that the installation of a frame poolwith your own hands from polycarbonate, PVC or metal is possible not only on the street. If the area of the house allows, it can be mounted indoors. In this case, you need to think about what materials will be done finishing in the room. It is better to choose for this purpose tile. It should be non-slip.
Before installation, you need to prepare the spacefor installation. There should be no hard cutting or piercing objects on the surface. Otherwise there will flow here. Before proceeding with the installation, the selected area is fenced around the perimeter of the future bowl with pegs with a rope.
Considering how to make a frame poolwith your own hands, you need to pay attention to a number of features of this process. It does not cause difficulties even for a beginner master. Special tools to use in the work is not required. The materials from which the bowl and the frame can be assembled can be different. The choice depends on the requirements and preferences of the owners of the site.
Assembly is carried out promptly.It is better to resort to the help of your family and relatives. So work will progress faster. It does not need to hire a team of skilled workers. This greatly reduces the cost of installation. Also, do not need to dig a pit to install the bowl. She will be above ground. It also greatly simplifies the installation process. For example, to create a stationary pool often resort to the help of special equipment. Manually dig a pit for a long time.
The assembly will be carried out immediately on the site. Necessary components are easy to transport to the site. Here is an assembly. Special preparation for this is not required.
It will be necessary to prepare the necessary materialsto build a frame pool with your own hands. Step by step instruction involves the installation of several designs. If the pool is assembled from a sheet frame, you need to prepare metal pipes. Parts can be plastic, polycarbonate or duralumin. You can use wooden bars, as well as 2.5 cm thick boards. If the structure is polygonal, pallets are used to give it the necessary strength. They are fastened with belts.
If the pool will be pivotal, for himHollow steel tubes will need to be prepared. They are interconnected by special parts. The tank will be made of PVC. It has a thickness of 0.7 cm. You can also use awning materials. It is better to purchase a film, in the structure of which there is an armirovka. These are special threads that are made of polyester or kevlar.
If wooden elements are used in the construction, they are necessarily treated with an antiseptic and covered with two layers of varnish. This significantly extends the life of the material.
Обустраивая каркасный бассейн своими руками на Dacha, you need to pay great attention to the choice of film. It must be laid on the surface of the bowl in several layers. Available in a wide range of materials. They differ in texture, color, durability. The average thickness of the PVC film for swimming pools is 1.5 mm. It is recommended to purchase material with a density of at least 650 g / m².
The film is lined on a substrate.Roofing material, hydro-textile, foam plastic and other similar materials are used to create this layer. They protect the material from punctures, premature wear. At the same time they can keep the temperature of the water in the pool.
Installing a frame pool with your own hands is quite simple. However, you will need to perform all actions consistently. First you need to prepare the necessary tools.
To perform the markup, you need to applywooden pegs and cord. Also necessarily used construction level, tape and pencil. You will need a shovel, a construction knife and a heat gun with a slit nozzle. A special roller is used for the seams. Also, the master needs to prepare a screwdriver, sealant and a gun for him.
After that you can start preparing the base. Using pegs and a rope, you need to identify the area in which the pool will be installed.
После этого на огражденном участке убирают topsoil, plant roots, stones. The surface should be perfectly flat. In some cases, the owners create deep pools. Such constructions are not collected for the winter period for storage indoors. In this case, you need to calculate how deep the bowl will be. It will be installed on a sand cushion and waterproofing layer. This should be taken into account when calculating.
Next on the prepared base stacksheets of foam or polystyrene foam (the second option is preferable). This is necessary so that in the process of drawing water into the bowl, the substrate does not deform, does not disperse at the joints.
Frame pools with their own hands going fromdifferent materials. First you need to install all the vertical elements of the structure. At the same time, their position must be checked with the help of a building level. In places where racks will be installed, you need to pave.
In the recesses establish vertical supports.They are pre-treated with bitumen or antiseptic compounds. They need to be fixed in the correct position with a cord. Racks should enter the ground at a depth of 50 cm. A layer of fine crushed stone is poured into the hole.
After that, make a harness.To do this, use the thick boards. They are located at a height of about 30 cm from the ground. Fixation is made with screws. If metal pipes are used, you need to use welding or use angles, bolted connections.
After that you need to form intermediateracks. To do this, use special struts. They are formed in the form of a triangle. Its top should be connected to the bar. This allows you to strengthen the design, make it stronger.
Installation of the frame pool at the dacha by thehands require proper installation of the bowl. From the prepared materials need to carve out parts for the future of the pool. Need to think through this process carefully. The number of stitches should be minimal. At the same time it is necessary to do overlapping canvases. It must be at least 3 cm.
First, the substrate is laid on the bottom.This may be a hydro or thermal insulation material. After that, you need to collect the parts that were cut out of PVC film. At the same time the construction hair dryer is used. On it you need to wear a slit nozzle. The temperature that the hair dryer will create should be up to 700 ° C.
The seams are heated with a tool.When they begin to melt, they are pressed tightly with a roller. It may have rubber or silicone rollers. It is best to conduct welding on the surface of chipboard or fiberboard. At the same time it should not be any extra items. Otherwise, the material may be damaged.
At the edges of the created bowl, you can make holes (boil them with a hairdryer) to install eyelets. This will firmly fix the PVC film on the frame.
Особого внимания требует установка лестницы для frame pool do it yourself. It can be made of different materials. Most often, if the frame is wooden, then the stairs are made of the same material. It can be made independently. You can also assemble a metal ladder. This will require welding. Easier to buy a finished metal ladder. Her steps can be made of plastic, wood or metal.
To mount the ladder, you need to install inA suitable place two additional timber. The distance between them should correspond to the width of the steps. Perpendicular down from the tops of the inclined beam, you need to install two more wooden supports. After that you can fill the steps. This design can be done independently.
Frame pools do-it-yourself often.Inside the prepared frame you need to put the prepared bowl. All corners and bends need to be combined correctly. Screws fasten the upper part of the bowl and strapping. They need to be installed in increments of 30 cm.
After that it is possible to mount a side.Some bowls suggest eyelets. Through them stretch the rope for additional fixation. The outer edge of the pool can be finished with plastic or wood panels, sheets of polycarbonate. The filter and the necessary equipment is installed.
After that, water is gradually drawn into the bowl. The folds need to be leveled immediately. If there is a lot of water in the pool, this will not be possible. After that, the finished structure can be operated.
Considering how to collect the frame pool with your own hands, you can perform all the actions yourself.
